Papers discussed the following function modules in the system: Search module, analysis module, auxiliary modules, management module design and implementation.
论文中论述了系统中如下功能模块：搜索模块，分析模块，辅助模块，管理模块的设计与实现。
Finally, describes the use of SSH integration framework in accordance with hierarchical structure on the accounting module, clearing the module design and implementation.
最后，阐述了运用SSH集成框架按照分层结构对核算模块、清算模块进行设计与实现。
The basic structure and working principle of the S3C4510B HDLC module is introduced. The basic design thinking and concrete implementation of the S3C4510B HDLC controller driver is presented.
对S3C 4510b的HDLC模块的基本结构和工作原理进行了阐述，对S3C 4510b的HDLC控制器驱动程序的基本设计思想及具体实现进行了研究。
This paper presents design and implementation of the simulation module in a logic-level VHDL simulation system.
介绍了VHDL逻辑级模拟系统中模拟模块的设计和实现。
This dissertation's focus is on the investigation of the design and implementation of real-time multi-target capture module and distance operation coprocessor, which are implemented with FPGA.
本文重点研究了基于FPGA的实时多目标捕获模块和距离运算协处理器的设计与实现。
The design and implementation of its system structure, digitalization scheme and each function module are emphatically introduced.
重点介绍了感应测井仪的系统结构、数字化方案设计及各功能模块的设计与实现。
Then design and implementation of both hardware module and software for the device is demonstrated in detail.
然后，论文对故障诊断装置中各硬件功能模块的设计与实现及软件的编写进行了详细论述。
Software design and implementation technology of OTHR data processing module are studied.
研究了OTHR数据处理模块的软件结构设计与实现技术。
The design and implementation of uplink power control module in RNC is proposed.
给出了RNC中上行链路功率控制模块的设计方案并予以实现。
This paper introduces the design principle of main function module of the system and implementation of it with software of EDA.
这里介绍了该系统主要功能模块设计原理并利用EDA软件设计实现。
The design and implementation of a hyper-redundant mobile manipulator system are described, which is composed of an 8 DOF module robot and a 1 DOF motorized rail.
对一个超冗余度移动操作臂机器人系统的设计和实现作了介绍，这个系统由一个8自由度的模块机器人和一个1自由度的电机驱动的导轨组成；
With the research of management information systems, the design and implementation of general module of management information systems is produced.
对管理信息系统进行研究，给出通用模块的设计和实现。
Finally, the paper achieve the main function of the system and give the design and implementation of module in detail.
最后，论文实现了该系统的主要功能，并详细给出了模块的设计和实现。
Finally, thesis introduces the design and implementation of every module in the system.
最后详细介绍了系统各功能模块的设计与实现。
Then, the design and implementation methods of each module are introduced, focusing on core technical issues.
然后，介绍了各模块的设计和实现方法，着重就其中的核心技术问题进行了讨论。
This article set steps as an example, illustrating UIDL control file by ANSYS, and editing the menu control file and dialog control file, implementation the system's interface module design.
本文以梯级为例，说明通过ANSYS对UIDL控制文件的调用，以及对菜单控制文件和对话框控制文件的编辑，实现梯级分析系统的界面模块设计。
Focus on the design and implementation of the VDSL2 interface management module, which is a new software module compared with ADSL2 +.
重点描述了VDSL2接口管理模块的设计和实现，对于ADSL2 +软件架构而言，它是一个全新的软件模块。
On the basis of pointing out the main technology foundations, this paper entails the design of watermarking module framework and implementation of functions of proxy server based on watermarking.
在指出了数字图书馆的主要技术基础上，详细阐述了数字水印模块框架设计过程和基于数字水印的代理服务器功能的实现过程。
For the software, it mainly studies the implementation of contact-less IC card read-write course, the design of communication protocol between read-write module and host computer.
在软件方面重点研究了非接触式IC卡读写过程的实现，读写器与上位机的通讯协议设计。
The design and implementation of our network video conference system, especially the dispatching module was discussed in this paper.
本文详细介绍了视频会议系统音视频引擎的设计与实现。
This paper focuses on the studies of the design and implementation of the data acquisition module based on the PCI bus and the data processing algorithms.
在此基础之上，本论文着重对基于PCI总线的数据采集模块的设计与实现和数据处理算法的原理与实现进行了研究。
This thesis introduces the design and implementation of parts functions in the Business-Acception module of the Integrated Customer Service SUB-SYSTEM in IBSS-CRM detailed.
本文详细介绍了IBSS-CRM的综合客服子系统营业受理模块中部分业务的设计与实现。
On the basis of detailed description of the design and implementation of interpolation module, the paper has applied the contour-shape interpolation algorithm and other algorithms to the system.
在详细叙述插值模块的设计与实现的基础上，将基于轮廓形状的插值算法和其它一些插值算法应用于系统中进行比较。
This thesis gives the system function in module design, data logic model, software design and system implementation functional structure and testing.
本文中给出了系统的功能模块设计、数据逻辑模型、软件功能结构设计和系统实现及测试。
In this paper, the functions of this module along with its design and implementation are discussed in detail.
本文详细介绍了该模块的功能、设计与实现。
In the paper, we also design a detailed implementation program for each module and achieve that with FPGA to verify the correction of the function and timing.
论文中对每个块都设计了详细的实现方案，并用FPGA进行了实现，验证了模块功能和时序的确性。
The modules were introduced, focusing on the design and implementation technologies of compile module, and testing with an example.
论文介绍了各个模块的功能和实现，重点阐述了编译模块的设计与实现的关键技术，并结合实例进行测试验证。
Then introduces the detailed design and implementation of each module, mainly including concrete implementation flows, Class and function design and coding;
然后描述了各模块的详细设计与实现，主要包括了具体流程，类与函数的设计以及编码实现；
Then introduces the detailed design and implementation of each module, mainly including concrete implementation flows, Class and function design and coding;
然后描述了各模块的详细设计与实现，主要包括了具体流程，类与函数的设计以及编码实现；
应用推荐