Due to low memory conditions or administrative modification of the cache size via the admin console, the cache might (temporarily) be configured such that it never caches data at all.
由于低内存条件和通过管理控制台进行了缓存大小的管理修改，因此可能将缓存配置(暂时)为完全不缓存数据。
Many factors such as the surface modification of PVC matrix and cellulose-fiber, processing conditions all affected the cell morphology and physical properties.
多种因素如PVC、纤维素纤维的改性处理、加工条件等都将影响泡孔形态与制品的物理机械性能。
The cationic modification of bamboo fibers, the direct dyeing and the different mordant dyeing conditions were optimized by orthogonal expts. and range analyses.
通过正交实验和极差分析，优化了竹纤维织物阳离子改性、直接染色和不同媒染的最佳工艺条件。
Furthermore, the selectivity and the mild reaction conditions of bio-catalysis is the cause of its industrial application for the modification of complicated target molecules.
此外，选择性和温和的反应条件使生物催化在工业上更多地用来修饰复杂的靶分子。
The effects of preparing conditions on surface modification of graphite were introduced. The morphology observation, contact Angle determination and TG-DTA analysis were carried out.
介绍了包覆条件对石墨表面改性的影响，对改性后的石墨进行了形貌观察、接触角测定、差热-热重分析。
Using sodium laurate as modification agent, process conditions were investigated and the modification results were analyzed by means of the activation indices.
对以月桂酸钠作改性剂进行了工艺条件的研究，用活化指数对改性效果进行了评价。
The optimal technical conditions for sulfated modification of konjac glucomannan gel beads were (investigated) by the quadratic regression rotatable orthogonal design.
采用二次回归旋转正交组合实验设计方法，探讨了魔芋葡甘聚糖凝胶珠的硫酸酯化修饰的最优化工艺条件。
The surface modification results were analysed by the methods of the specific surface area measurement and infra red absorption spectroscopy, and the best conditions for modification were obtained.
应用表面改性剂进行了氢氧化铝表面改性研究，采用了比表面积测定、红外光谱分析等测试方法对改性效果进行评价，确定了最佳改性条件。
The influences of swelling agent solution concentration, treating temperature and time on the modification to flax fabric were studied to find the optimum modification conditions.
通过比较膨化剂浓度、改性温度和时间的改变对提高亚麻纤维染色性能的影响，优化出提高亚麻纤维染色性能的最佳改性工艺。
Besides, the feasibility of dynamic modification of the heat transfer conditions of the crucible lid was discussed.
另外，讨论了在生长过程中动态调整坩埚盖散热条件的可行性。
In this article, the processing conditions of surface modification of Hubei Daye wollastonite are studied.
实验以湖北大冶硅灰石为原料，初步探讨了硅灰石表面改性的工艺条件。
The influences of ABS and processing conditions on the properties of the blends are analyzed , and the techniques of compatibilization modification are discussed.
分析了ABS用量和加工工艺对共混物性能的影响，讨论了ABS共混物的增容改性技术。
Thus, any modification of theory of fault bases on specific historical conditions.
因而，罪过理论的任何变动都根植于特定时代条件的变迁。
The turbidimetry was used to evaluate the efficacy of surface modification, the optimal formation conditions of production were fixed.
主要研究了氢氧化镁的湿法表面改性的工艺过程，用浊度分析方法对改性效果进行了比较，确定了最佳工艺条件。
The key technical conditions for the design of shaped spinneret plates and the influence of various spinning conditions on fiber modification ratio during the shaped fiber development are discussed.
论述了异形喷丝板设计的技术关键条件和异形纤维开发中各种纺丝条件对纤维异形度的影响。
An intelligent fuzzy shift control system composed of a basic fuzzy shift strategy and a fuzzy modification module was developed to improve dynamic conditions and cross-country maneuverability.
运用模糊控制理论，建立了由基本模糊换档策略和模糊修正模块组成的车辆模糊智能换档控制系统，以提高履带车辆的动力性和越野机动性。
The paper analysed modification conditions and dyeing processes of cellulose. The experiments show that color fastness of dyeing can also meet the national standard.
对纤维素的改性工艺条件和染色工艺作了分析，试验表明染色色牢度基本符合国家标准。
And also the paper discusses the modification of settlement velocity control standards under the conditions of overload and sets forth the enlarging co-...
在此基础上，讨论了超载条件下，沉降速率控制标准的修正，并给出了沉降速率放大系数。
Adoption or modification of the general wage and salary structure and the overall terms and conditions of employment of the employees;
采纳和修改，普通工资和资薪结构，和所有雇员聘请条件。
The surface modification conditions of quartz tailing with titanate as coupling agent have been studied. The main properties and application of the moolified Quartz Tailing in polyethylene are shown.
研究了用钛酸酯偶联剂进行石英尾矿表面改性的反应条件，对改性后的主要性能进行了综合评价，并介绍了改性尾矿在聚乙烯塑料中的应用情况。
Modification of cadmium (Cd) toxicity in ramie by exogenous spermine (Spm) with different concentrations and adding modes were researched under hydroponic conditions.
采用水培实验法，研究了不同浓度和不同施加方式下外源精胺对苎麻镉污染毒害的缓解效应。
The optimum processing conditions in the surface modification of nanometer magnesia : the modification temperature is 600C;
纳米氧化镁经月桂酸钠处理可以得到表面亲油化的粒子，改性最佳工艺条件为：改性温度600C；
Analyzes the characteristics of the general layout for modification and expansion plants based on the general rules and in consideration of actual conditions.
针对改扩建工厂总平面布置的特点，依据其总平面布置的原则，结合实际合理布置。
Modification of terms. We reserve the right to modify these terms and conditions at any time and without prior notice to you. It is your responsibility to return to this site to review our terms.
第11条说的是我们将保留随时修改这些条款和条件的权力，而且修改了也不会提前通知你，你的责任是经常回到这个页面察看我们的条款是不是修改了。
Based on the experiments, the variation rule of the sensitive physical properties of AlSi alloy melt was studied under the conditions of modification and superheat.
本文在试验基础上研究了铝硅合金熔体在变质和过热条件下敏感物性的变化规律。
The modification of bamboo/cotton blended fabric is performed with selected cellulase, and the process conditions and recipe are optimized by single factor and orthogonal experiments.
筛选了纤维素酶对竹/棉混纺织物进行改性处理，经单因素试验及正交试验，优化了工艺条件及配方，并对改性后的织物试样进行了综合品质的测试。
The modification of bamboo/cotton blended fabric is performed with selected cellulase, and the process conditions and recipe are optimized by single factor and orthogonal experiments.
筛选了纤维素酶对竹/棉混纺织物进行改性处理，经单因素试验及正交试验，优化了工艺条件及配方，并对改性后的织物试样进行了综合品质的测试。
应用推荐