While very practical, this research is also quite technical in that the experimental data will be compared to numerical simulations, small-scale experiments and published theoretical models.
同时非常实际的，这一研究也很具有科技性，实验数据将被和数字仿真，小比例实验和出版的理论模型相对比。
But it might be more realistic and useful to employ a suite of such models, in the manner of global climate simulations, which project various possible futures.
但一种像全球气候模拟系统那样，能够预测未来经济运行的各种可能性的模型可能会更加实际、有用。
Current models mostly ignore human behavior, such as chatting or shoe-tying, because they introduce too much complexity and freeze up simulations.
近来的计算机模型大部分都忽视了人类的行为举止，例如说话话或者绑鞋带，因为这些使模拟变得复杂和不灵活。
Theoretical models and computer simulations suggest that the first galaxies could have formed as early as 200 million years after the Big Bang event.
理论模型和计算机模拟揭示了第一个星系最早可能在大爆炸后2亿年已经形成了。
Virtual manufacturing(VM) is an emerging technology that is used for the mimics real manufacturing operations with models, simulations and artificial intelligence.
虚拟制造（VM）是一门新兴的技术，它主要是用于模拟真实生产，比如产品模型、仿真以及人工智能。
The physical models and fundamental algorithms of MD simulations appropriate for thermal conductivity computations are summarized.
总结了通过分子动力学模拟方法求得导热系数的物理模型和基本算法。
Setting up the soft-sensing models of oxygen content through mechanism analysis, and this soft-sensing model fit well with the practical oxygen content, which is illustrated by the simulations.
主要通过机理分析建立了氧量软测量模型，仿真验证表明建立的氧量软测量模型能够较好的反映实际氧量的变化。
Some results of the simulations of molybdenum cone and wedge by use of the models are in agreement with the experimental results.
用此模型对钼锥和楔的模拟计算所得的一些结果与实验相符。
It offers control objects for close loop simulations of different controllers and control algorithms with a wide choice of object models and parameters.
它能建立不同被控对象模型，且其对象特性参数可自选，从而可为各种控制器和控制算法实现闭环控制仿真提供被控对象。
The simulation principles and the mathematical model is described, and then, the key models of simulations such as signal characteristics, servo systems and signal process system are followed.
重点描述了仿真原理及仿真模型组成，介绍了雷达信号特性仿真、雷达伺服系统仿真、雷达信号处理系统仿真等关键环节的数学仿真模型。
By these models, the simulations of water and heat transportation were performed under the full wheat straw mulch at summer corns in Heilonggang region, Hebei province.
应用该模型对河北省黑龙港地区秸秆覆盖条件下夏玉米的水热运移进行模拟。
The focus is on models and computer simulations: there is no introduction explaining what we already know about cities and growth, or any attempt at orientation on the phenomenological side.
焦点集中于模型和计算机模拟：没有对于我们已知的城市和增长或者现象学方向的任何尝试的解释性介绍，这喜忧参半。
Finally, simulations are presented about the above coordinated control models of single mobile robot and multiple mobile robots. The results are analyzed and corresponding problems are introduced.
最后，对上面提到的单移动机器人和多移动机器人的各种控制模型进行了仿真实验，并对仿真结果进行了分析，提出了相应的问题。
MM5, GRAPES and AREM are of better prediction ability, especially in precipitation areas, intensity and evolution. The simulations by MM5 and AREM models are almost identical with the observed.
GRAPES和AREM显示了较好的预报能力，特别是MM5和AREM模式的预报在落区、强度和降水演变上与实况较一致。
By integrating numerical methods and ocean models, a series of current and wave models from near-shore sea to inshore water are set up, which are used in numerical simulations and forecasts.
通过计算方法和数值模式集成，建立了一套近海和近岸流、浪模式，并初步应用于数值模拟和数值预报。
This paper systemically introduces the fractal structure models, computer simulations and analysis methods of flocs in order to promote application of this technique.
本文对絮体的分形结构模型、絮体成长过程的计算机模拟方法和模拟结果的分析方法进行了系统的介绍，以期推动此项技术的应用研究。
Based on real traffic data and simulations, the paper gives a comparison and discussions of both models.
在实测交通流数据基础上，应用NS模型和引入随机参量的LWR模型进行了计算机模拟和分析。
In order to offer reliable basis, in this article a few exhaust volute models of gas turbine are designed and some numerical simulations are carried on according to the requirements mentioned above.
本文即是针对这两方面的要求，进行燃气轮机排气蜗壳的设计及数值模拟计算，为设计制造高性能的舰用燃气轮机排气蜗壳提供可靠的依据。
The strain history achieved may provide a base in shell design and verify theoretical models and numerical simulations of tungsten alloy shell impacting and penetrating normally into concrete targets.
同时，实验研究获得的钨合金壳体危险截面处应变—时间历程曲线，既可以为壳体设计提供理论支撑，又为钨合金壳体侵彻混凝土靶板的侵彻模型和数值仿真建立了验证标准。
PC-DMIS CAD lets you use the power of 3D CAD data to create part programs, both on and off-line, complete with graphical part models and probe path simulations.
软件允许用户采用三维CAD数据，脱机或者联机生成工件检测程序，同时完成图形化工件模型和探测路径的模拟。
This paper introduces the GCEMC method, pore models commonly used in the simulations of adsorption on activated carbons and the fluid-fluid and the fluid - wall potential model.
对巨正则系综蒙特卡罗法，目前在活性炭吸附特征研究中所普遍采用的活性炭微孔模型和分子与原子之间相互作用的模型进行较为详细的介绍。
After studying the four model simulations by MATLAB tools, their advantages and shortcoming comes. The four models are forecast by other data and we get good validity.
通过MA TLAB工具对这四种模型进行了仿真研究，比较各自的优缺点，并对各个模型进行数据预测，获得了较好的效果。
Sets of simulations were carried on to study the correction of models and effects of parameters.
本研究中建立了多种不同模型被用来验证模型的可靠性以及各种参数对扩散过程的影响。
In chapter 3, the orbit dynamics models are established, the Kalman Filter of the GPS and kinematics equation combined are designed, and simulations of different orbit Micro-satellite are done.
第三章，建立了卫星轨道动力学模型，设计了GPS和运动方程组合的卡尔曼滤波器，并针对不同轨道高度的微小卫星进行了定位仿真。
PC-DMIS PREMIUM lets you use the power of 3D CAD data to create part programs, both on and off-line, complete with graphical part models and probe path simulations.
完全的三维仿真功能，可以使操作者能够在实际进行各种元素测量前，图形化检验初始化设定和零件检测程序。
PC-DMIS PREMIUM lets you use the power of 3D CAD data to create part programs, both on and off-line, complete with graphical part models and probe path simulations.
完全的三维仿真功能，可以使操作者能够在实际进行各种元素测量前，图形化检验初始化设定和零件检测程序。
应用推荐