Methods: Middle brain injury model was performed in cats subjected to fluid-percussion traumatic brain injury.
方法：通过建立猫中型液压颅脑损伤模型。
Meso analysis on disturbed state concept theory(DSC) based on hardening model was performed. The logical rationality of problem-solving steps of DSC was further proved.
对基于硬化模型建立的扰动状态理论（DSC）做出细观分析，进一步证明其解决问题的逻辑合理性。
For many years this model was very much in favor in psychology, even though memory tests were never performed on young children.
多年来，这个模型在心理学上非常受欢迎，尽管记忆测试从未在儿童身上进行过。
After second thought, I remembered the day before yesterday is the time when Guangzhou Model test 1 was held. I guessed she must have performed badly in the test.
后来细想一下昨天是3月21日，前天应该是广州一模的考试时间，难不成模拟考试考差了？
The monotonic shear testing of two-story model reinforced masonry shear wall in different compressive force was performed.
随后进行了两榀两层配筋砌块砌体剪力墙在不同竖向荷载下的单调加载受剪性能试验。
For verifying the accuracy of the model parameters an impulse excitation test was performed.
为了验证模型参数的准确性，对推进轴系进行了脉冲激励试验。
Using CFX, the numerical simulation of the core flow distribution was performed for China Advanced Research Reactor (CARR) with the porous media model.
应用计算流体力学软件CFX，采用多孔介质模型对中国先进研究堆(CARR)的堆芯流量分配进行了数值模拟。
A drawing model of slumping salvage was designed, and a preliminary analysis on drawing salvage is performed through slumping salvage tests in swampy land.
设计了陷落体救助模型系统，进行了沼泽湿地陷落体救助室内试验研究，对救助拉拔过程进行了初步的探讨。
Ligation of coronary artery was performed in the model group.
模型组进行冠状动脉结扎。
Methods Epiploon transplant was performed in the animal - model of GANFH to observe the change of the blood vessel and blood circulation.
方法在动物股骨头坏死的模型上应用大网膜移植观察股骨头血管与血运改变的情况。
The dynamic drawdown forecast was performed and the groundwater management model was developed, based on a numerical quasi-three-dimensional simulation model introduced.
引入准三维流数学模型进行地下水动态预报及建立地下水管理模型。
The water turbine model test for Geheyan Project was performed in 1991, in Lachine, Quebee, Canada.
隔河岩水轮机模型试验1991年在加拿大魁北克拉辛市进行。
Methods: Rat model of AMI was performed and allogenic MSC were isolated and cultured.
方法：制备大鼠急性心肌梗死模型，分离培养同种异体msc。
The cutting process was performed through subtraction boolean operation of the solid model of workpiece and cutter.
利用齿坯实体模型和刀具实体模型做布尔减运算，来实现模拟工件材料的去除过程；
An engineering case indicated that the random damage model could be employed to simulate the random damage of the grouting curtain, and the seepage analysis was performed.
通过一工程实例，说明了利用该随机缺损模型可以模拟帷幕的随机缺损，并对其进行渗流分析。
A taut strip model experiment was performed to verify that the AAF dependent not only on the frequency, but also on the structures dimension and characteristic size of the turbulence field.
设计了拉条模型试验验证结构的气动导纳不单与频率有关，还与结构的特征尺寸、风场的特征参数有关。
On the basis of a two-phase flow sonic velocity a gas-solid two-phase flow shock-wave model was set up, and calculations and analyses were performed.
建立了基于两相流音速的气固两相流激波模型，并进行了计算分析。
Taking structure weight as objective function, the optimization model of overweight breech of a type of automatic weapon was established, and its structure topological optimization was performed.
以结构质量为目标函数，建立了某自动武器超重部件枪尾的优化模型，进行了结构拓扑优化。
The experimental group was performed kindness nursing according to Roy adaptation model, and the control group was performed conventional nursing.
实验组应用罗伊适应模式实行亲情护理，对照组按常规模式进行护理。
Based on experiments of various biomass flash pyrolysis volatilization performed with a laminar entrained flow reactor, the model was checked by experimental data acquired with ash tracer method.
通过在层流炉上进行的多种生物质闪速热解挥发实验，并利用灰分示踪法计算得到了挥发百分比实验数据。
Radiosensitizing experiment was performed using T-739 mice. The tumor model was LA-795 pulmonary adenocarcinoma, and the effect was assessed using tumor regrowth delay.
放射增敏实验用T-739小鼠，肿瘤模型LA-795肺腺癌，采用肿瘤生长延迟法评价效果；
The cause of corrosion for model YSP-15 cylinder was analyzed, and precautionary measures was performed.
对YSP-15型钢瓶的腐蚀原因进行了分析，并提出对策和建议。
Using three dimensional linear viscoelasticity finite element model, numerical simulation was performed. The deformation of solid propellant grain under axial acceleration was investigated.
并运用三维线性粘弹性有限元模型，对离心实验过程进行了数值模拟，以确定固体推进剂药柱在轴向过载作用下的变形问题。
Numerical simulation of flow and temperature field in the test tube of Model Loop Wax Deposition Apparatus was performed.
对模型环道蜡沉积装置测试段流场温度场进行了数值模拟。
At last, a research on the P2CMM model serviceability was performed.
最后，本文对P 2cmm模型的适用性进行了研究。
The mechanics evaluation of bonding strength between coating and substrate was performed with finite element method (FEM), and an improved test model was proposed.
采用有限元法对涂层与基体界面结合强度进行了力学模拟，并对试验模型提出了改进。
The qualitative and quantitative observation for earth anchors was performed through the model test and site measurement and the anchor mechanism is further recognized.
作者通过模型试验和现场试验对竖向土锚进行了定性、定量的观察，从而加深了对土锚受力机理的认识。
Method: the study was performed by intestinal perfusion model in rats to observe the effect of absorption sites and concentrations on absorption kinetics of aesculin.
方法：以大鼠在体肠灌流模型从吸收部位、药物浓度考察秦皮甲素的肠吸收动力学情况。
Methods the experiment was performed in the model of acute myocardial ischemia induced by pituitrin in SD rats.
方法采用垂体后叶素所致大鼠急性缺血模型观察药物的作用。
Methods the experiment was performed in the model of acute myocardial ischemia induced by pituitrin in SD rats.
方法采用垂体后叶素所致大鼠急性缺血模型观察药物的作用。
应用推荐