Reliability index Robust Convex model Optimization problem;
可靠性指标；稳健；凸模型；优化问题；
Field gravity survey was an important method of gravity field model optimization.
野外重力测量是精化全球和局部重力场模型的重要手段之一。
The two-level hierarchical model optimization method is applied to find the solution.
根据模型的结构特点，采用两级递阶优化方法进行求解。
A standard load distribution procedure was formed with a method of model optimization.
同时给出了负荷分配模型的优化方法。
Model optimization gives the optimum option order quantities under two e-commission systems.
通过对模型的优化得到两种电子佣金制度下的最优期权订购量。
According to red tide monitoring data from Tongan Bay, we carried out the Quadratic Knapsack model optimization for monitoring stations.
根据同安湾赤潮监测资料，对监测站位进行二次背包模型优化。
Using increment analysis, the law of changing economic factors, such as cost, price, discount rate, etc, to influence the model optimization could be studied under different planting measures.
运用增量分析方法，研究不同栽培措施下，成本、价格、折现率等经济因素变化对栽培模式优化的影响规律。
Firstly, the theoretical basis of Harbin industrial energy conservation project optimization model which includes the basic theory of energy conservation project and model optimization was introduced.
论文首先详细阐述了哈尔滨市工业节能项目优化模型的理论基础。
Ultimately, the goal is feedback into the model for continuous improvement and optimization.
最终的目标是将反馈提交到模型中，以进行持续的改进和优化。
It also helps in generation of data migration maps, to perform dependency analysis and also helps in optimization of target system data model.
还有助于生成数据迁移映射，以执行依赖性分析，而且还有助于优化目标系统数据模型。
It refers to the act of cutting across the established divisions of responsibility (such as logging and performance optimization) in a given programming model.
它指的是在一个给定的编程模型中穿越既定的职责部分（比如日志记录和性能优化）的操作。
Lack of dynamic process optimization has made it very hard to change a process model on the fly in a production environment.
由于缺少动态流程优化，因此很难动态地更改生产环境中的流程模型。
Once the optimization (such as MQTs) is created for a cube model, all the cubes derived from it benefit.
在为多维数据集模型创建了优化(比如MQT)之后，从这个模型派生的所有多维数据集都会因此受益。
This optimization method which based on the model of virtual prototype has general applicability to the optimized research of loaders' working device.
这种基于虚拟样机模型的优化方法对于装载机工作装置的优化研究具有普遍的适用性。
This optimization method which based on the model of virtual prototype has general applicability to the optimal research of loaders' working device.
这种基于虚拟样机模型的优化方法对于装载机工作装置的优化研究具有普遍的适用性。
Experimental results show that the optimization model, criteria and algorithm are very effective.
实验数据表明，其优化模型、准则和算法是十分有效的。
Aim at the problem, this paper establishes the mathematical model of multipurpose optimization to made hoisting mechanism to occupy minimum space and planet gear to use minimum material.
针对这一问题，建立了以起升机构占用空间最小和行星齿轮减速机构用材最少为目标的多目标最优化数学模型。
The establishment of this model lays a foundation for the optimization of the whole system.
此模型的建立，为实现整个漏风系统的优化控制奠定了基础。
Surrogate model is a key element of the multidisciplinary design optimization ( MDO ) .
代理模型是多学科设计优化的关键技术之一。
We develop a fringing state space model used in the continuous annealing furnace computer optimization control.
本文开发了一个用于连续退火炉计算机优化控制的离散状态空间模型。
With the study of neural network model, this paper advances some of improvement and optimization techniques that can accelerate the learning speed of network and increase the stability of model.
本文从神经网络模型的结构出发，对学习算法提出了一系列改进和优化措施，以加快网络的学习速度，并增加模型的稳定性。
The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
In the optimization phase, we develop a predictive model for the system to find useful operating conditions through response surface contour plots and perhaps mathematical optimization.
在优化阶段，我们开发了一个系统的预测模型，通过响应面的等高线图或者数学优化，去寻找合适的操作条件。
A numerical example shows that the structural analysis and optimization design model and method in this paper are valid and feasible.
算例表明：文中提出的随机结构分析和优化模型与设计方法是合理、可行和有效的。
The reheating furnace process computer system goals are mainly dynamic production process control, process operation records tracking, and production process optimization with metallurgy model.
再加热炉过程控制计算机系统的主要目的是实现生产动态过程控制，跟踪操作记录，同时通过冶金模型进行生产过程优化。
Considering the boom cross section as a whole, a parametric finite element model and a parametric optimization model for local stability calculation of a boom structure were established.
将吊臂截面作为整体考虑，建立了吊臂结构局部稳定性计算的参数化有限元模型和参数优化模型。
On this basis, it raises a query optimization model for OQL by introducing some query theories of RDB into the query process of OODB, and gives its implement strategy.
在此基础上，将RDB的一些查询理论应用于OODB的查询中，提出了一种OQL的查询优化模型，并给出其实现策略。
In this paper, an OR based production optimization model is introduced to overcome the weakness of MRPII.
介绍一个基于运筹学模型技术的集成生产计划优化模型以克服原MRPII模型的不足。
In this paper, an OR based production optimization model is introduced to overcome the weakness of MRPII.
介绍一个基于运筹学模型技术的集成生产计划优化模型以克服原MRPII模型的不足。
应用推荐