The model element method includes both finite element method and upper bound element method and can compensate each to other.
模型元法的特点是既包容有限元法,又包容上限元法,使三者相互取长补短,互为基础。
Finally, this method creates a column using the model element factory.
最后,该方法使用模型元素工厂创建一个列。
You can use this method when there is a semantically equivalent element in the NIEM model, but it does not quite meet your needs.
当NIEM模型中有一个语义上等价的元素,但是却不太满足需求时,可以使用该方法。
Unlike the element, you cannot add a static mapping entry in the initializePackageContents() method because the EMF model only allows one mapping for each local element name.
和元素不同的是,不能在 initializePackageContents()方法中添加静态映射条目,这是因为EMF模型对每个局部元素名称只允许一个映射。
Experimentation data shows that the principle of bending mechanism in this article is feasible, finite element model of bending mechanism is credible and its design method is dependable.
样机试验数据表明提供的压弯机构原理是可行的,压弯机构仿真有限元模型是可信的,这种设计方法是可靠的。
The optimized design scheme could be found out to content requirements of design by a method combining calculation of finite element model and optimized design.
采用整体有限元模型计算与设计优化相结合的方法,可以在满足各项设计要求的条件下找到最优预应力设计方案。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
In this paper, the model of the system established by the Finite Element Method will be updated by BP Neural Network theory.
本文将神经网络理论用于对利用有限元分析方法得到的系统模型进行修正。
In this dissertation, nonlinear finite element model establishment method of the guyed mast is studied.
本文研究了桅杆结构非线性有限元模型的建立方法。
Using complex structure finite element analysis, the theoretical prediction conforms with the experimental results very well, the equivalent model is reasonable, and the method is correct.
所建模型经复杂结构有限元方法分析,结果和试验相吻合,表明等效模型是合理的,方法是正确的。
The key to establish a precise dynamic model with Finite Element Method is the simulation of the dynamic characteristics of the joint face in the machine tool.
而建立机床结构精确的动力学有限元模型的关键是对机床机构中结合面的动力学描述。
In this paper, we discuss the numerical modeling of complex resistivity anomalies for Cole-Cole dispersion model by the Finite Element Method (FEM).
本文研究了用有限元数值方法模拟柯尔—柯尔复电阻率模型异常规律的问题。
Using enthalpy to deal with latent heat of solidification the numerical model is solved by finite element method, and a steady temperature field can be obtained under a certain condition.
在此基础上采用有限单元方法数值求解模型,并运用热焓法处理凝固潜热,得到了一定工艺条件下的稳态凝固温度场。
This paper describes a method based on the generalized principle of virtual work to derive the hybrid model of finite element. An assumed-strain hybrid model was obtained.
本文提出用广义虚功原理的方法建立有限元的杂交模型,并具体导出了一种杂交应变模型。
Model analysis method with cone shell element for axisymmetric shell is discussed in this paper.
本文选用锥壳单元,介绍了轴对称旋转壳模态分析方法。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
本文应用有限元方法,建立了横流式农用清选风机内部的气体流动数值模拟模型。
Second, using large-scale finite element method software—MARC establishes the rolling model, and compiles the process file, and sets up the different rolling condition parameters.
运用大型有限元软件MARC,建立轧制模型,编写过程文件,设置不同的轧制条件参数。
Based on the theory of block element method and calculating model, this paper suggests a calculating model for block element method with effect of reinforcing steel bar considered.
依据块体单元法的理论和计算模型,提出了考虑钢筋作用效应的块体单元法计算模型。
Structural free vibration characterization and seismic response were calculated by means of beam-plate linear mathematical model of finite element method.
采用梁、板线性有限元数学模型计算了结构自振特性和地震响应。
A mathematical model for thermal process is established and the process is simulated by numerical methods such as finite element method etc.
建立了热过程的数学模型,并采用有限元等数值方法模拟其热过程。
Analyze truss antenna framework structure with finite element method and establish sub-model to compute the stress distribution of the speecial part.
应用有限元方法对桁架式天线骨架结构进行分析,在关注区域建立了模型计算准确的应力分布。
According to rock soil engineering properties and dynamic character of the ash dam of Anyang Power Plant, the dynamic analytical model is set up by the finite element method.
根据安阳电厂灰坝岩土工程性质及其动力学特性,建立了适合灰坝工程的动力分析模型并采用有限元法进行了动力分析。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
为了分析定宽过程中板坯头部失宽的变化规律,利用数值模拟的方法建立了板坯侧压的有限元模型。
By the equilong unit finite element method based on the Wenkel model, the computation is speeded up remarkably.
采用文克尔模型为基础的等长单元有限元法,显著地提高了计算速度。
The damage diagnosis method based on vibration testing can be further classified as a direct system identification method, a damage index method and a finite element model modification method.
其中基于振动测试的损伤诊断法可进一步分为直接的系统识别方法、损伤指标法和有限元模型修正法。
The model was analyzed by the mixed finite element method and comparison of theoretical and experimental results was also carried out.
本文还采用混合有限元法分析试验模型,并与试验结果进行了对比分析。
A parallelogram oblique element model is developed in the Finite element Method of Lines (FEMOL) for the solutions of oblique plate bending problems.
导出斜型薄板单元模型并应用于有限元线法(FEMOL)求解平行四边形斜板的弯曲问题。
A parallelogram oblique element model is developed in the Finite element Method of Lines (FEMOL) for the solutions of oblique plate bending problems.
导出斜型薄板单元模型并应用于有限元线法(FEMOL)求解平行四边形斜板的弯曲问题。
应用推荐