The outer loop uses neural network and internal model control.
外回路采用神经网络内模控制。
Comparisons of differently expressed genes in model control and Chinese herb groups.
与模型对照组比较中药治疗组的差异表达基因。
Most of the tools use some kind of click-and-drag flowchart motif to model control flow.
大多数工具使用一些拖拉式的流程图来模拟流程控制。
A sliding model control term is used to compensate for the effects of approximation errors.
一个滑模控制项用于消除神经网络逼近误差的影响。
The robust stability of a generic model control (GMC) for nonlinear affine systems is analyzed in this paper.
针对基于仿射非线性系统的一般模型控制(GMC)方法进行了鲁棒稳定性分析。
Gateway form using decision, fork, merge, and joins is often more readable for models that only model control flow.
网关形式使用decision、fork、merge和join元素，对于只包含控制流的模型而言，此形式通常更易于理解。
For the fact given above, a digital internal model control (DIMC) algorithm based on discrete model is developed.
该文针对这种情况，提出一种基于离散对象模型的数字内模控制(DIMC)算法。
This paper discusses waveform correction technique of the CVCF-SPWM inverter based on internal model control theory.
本文的研究内容是基于内模控制理论的CVCF - SPWM逆变器波形控制技术。
A novel position controller for an electro-optical tracking system is designed based on Internal Model control (IMC) principle.
针对光电跟踪系统，提出一种基于内模控制原理的新型位置控制器设计方法。
An internal model control strategy is proposed to a class of open loop stable nonlinear systems described by fuzzy neural networks.
针对一类开环稳定的非线性系统，提出了一种基于模糊神经网络的非线性内模控制方案。
Spinal cord injury models were established by compression method in rats of model control group and stem cell transplantation group.
模型对照组、干细胞移植组大鼠采用重物压迫法建立脊髓损伤模型。
METHODS: Acute global brain ischemia-reperfusion models were established in rats of puerarin treatment group and model control group.
方法：葛根素治疗组及模型对照组建立大鼠急性全脑缺血再灌注模型。
Multiple model control is an effective way for solving complicated problems such as time varying, nonlinear and parameters uncertainty.
多模型控制是解决系统时变、非线性、参数不确定性等复杂问题得一种有效方法。
Aiming at the strong nonlinear multiple variable coupling system, a new multivariable internal model control based on T-S fuzzy model was proposed.
针对强非线性、多变量耦合系统，提出了一种基于动态t - S模糊模型的约束内模控制策略。
The importance of the coating weight control for the CGL and the model control technique used by most manufacturers at present are first introduced.
首先介绍了热镀锌机组镀层重量控制的重要性和目前主要厂家所使用的模型控制技术。
A novel internal model control structure with multiple output error feedbacks is proposed in this paper, by means of multi model decomposition technique.
通过对受控对象模型的并行结构分解，引入多重输出误差反馈，构成了一种新的内模控制结构。
Methods 30 Chinese mini-swine were randomly into live groups: model control group, small -, middle -, large-dose group and sham operation group (6 each).
方法中华小型猪30只，随机分成模型对照组，通心络治疗小、中、大剂量组和假手术组，每组6只。
Methods 30 Chinese mini-swine were randomly into five groups: model control group, small - , middle - , large-dose group and sham operation group (6 each) .
方法中华小型猪30只，随机分成模型对照组， 通心络治疗小、中和大剂量组和假手术组，每组6只。
The design of the flight controller that exploits the advantages of the nonlinear dynamic inversion, adaptive fuzzy system and slide model control is discussed.
论述了综合运用非线性动态逆、自适应模糊系统和滑模控制的优点进行飞行控制律设计的方法。
In this paper, multiple output error feedbacks are introduced via the parallel decomposition of the plant transfer function in the internal model control system.
本文通过对被控对象模型的传递函数并行结构分解，引入多重输出误差反馈，并根据内模结构来设计系统控制器。
In addition to gateways, several of these modeling languages (we will only look at Business Modeler) offer an alternative approach to model control and data flow.
除网关外，其中的部分建模语言(我们将只关注Business Modeler)还提供了建立控制流和数据流模型的另一种可选方法。
Contrasted with the prevent group, the treat group and the model control group coming back of I Atrioventricular block or normal electrocardiography gets earlier.
预防组、治疗组与模型组比较，恢复到一度房室传导阻滞的时间及恢复到大致正常心率的时间缩短。
The simulation and experiment results show that this dual-model control method realizes the expectant objective, and it ensures the smoothness of the robot moving.
仿真和实际实验表明，这种双模控制方法实现了预期的目标，且保证了机器人行走的平滑性。
Optimal tracking performance for a class of uncertainty systems is discussed in the presence of control energy constraint under internal model control (IMC) structure.
在内模控制(IMC)结构下，对控制能量存在约束时一类不确定系统所能达到的最优跟踪性能进行了探讨。
Design method of a kind of discrete time two-port internal model controller (IMC)of servo system was proposed based on continuous-time two-port internal model control.
在陈庆伟学者提出的连续时间双口内模控制的基础上，提出了一种针对伺服系统的离散时间双口内模控制器设计方法。
For an industrial plant with high great lag, the current control strategy is Smith predictive control, or internal model control, both of them are using continuous models.
对于带有严重纯滞后的工业对象，目前的控制策略是史密斯预估控制，或者是内模控制，他们都要使用连续域的数学模型。
A new scheme of using common model control based on input equivalent disturbance (ICMC) to design controller was presented for nonlinear electro-hydraulic servo control systems.
针对非线性的电液伺服系统，提出一种利用基于输入等价干扰的通用模型控制算法(ICMC)来设计控制器新策略。
An internal model controller design for industrial process with dominant delay is proposed, it makes internal model control combine with double-port control and is a proved technique.
针对具有此种情况的大纯滞后工业过程，提出了一种将内模控制与双口控制相结合的改进的内模控制器设计方法。
The fuzzy variable structure sliding model control provides rapidity and stability for tracking, while PI control eliminates steady-state vibration and improves steady-state accuracy.
模糊变结构滑模控制提供了跟踪的快速性和稳定性，PI控制则消除稳态抖动，提高了稳态精度。
Theoretical analysis shows that, pole placement control can be realized using this newly developed internal model control structure just from appropriate selection of the feedback gains.
理论分析表明，采用该内模控制结构，只要适当选择输出误差反馈增益，可实现闭环系统极点的任意配置。
应用推荐