Mode locking can be induced not only by loss modulation, but also by phase modulation.
锁模不仅可用损耗调制取得，也可用位相调制来得到。
The mode locking means is adapted to be in a first extreme position and in a second extreme position.
该模式锁定装置适合位于第一极限位置和第二极限位置。
The place rule of work material, laser fiber to select mode and mode locking apparatus are researched in this paper.
本文基于对上述模型的设计，讨论了谐振腔中工作物质的摆放，引导光束并且进行模式选择的选模光纤和锁模器件。
The starting characteristics are theoretically analyzed according to the self-starting condition of Kerr lens mode locking.
利用克尔透镜锁模自启动条件，对常用的四镜腔激光器的启动特性进行了系统分析。
The mode locking means is adapted to be in the first extreme position during dose setting and the second extreme position during injection of a set dose.
该模式锁定装置适合在设定剂量过程中处于第一极限位置，且在注射设定剂量过程中处于第二极限位置。
Taking the cavity parameters providing a most efficient mode locking and based on fluctuation model, we performed a numerical simulation of laser operation.
利用产生最有效锁模的腔参数及涨落模型，进行了激光过程的数值模拟。
It is suggested that using a NACLM as a passive mode locking element, generation of ultrashort pulses of very high repetition rate is promising with a fiber laser.
实验表明，采用非线性放大复合环形镜构成复合腔光纤激光器，有可能获得高重复频率的锁模脉冲。
The effects of phase bias and group velocity dispersion on mode locking mechanism are analyzed. The operating conditions for stable short pulse generation are obtained.
分析了相位偏置和光纤的色散对锁模机制的影响，获得了产生稳定超短光脉冲的条件。
The practical structure of die casting mould with the rotational automatic thread demoulding for shell parts, the calculation of mode locking force and the process parameters were presented.
给出了罩壳零件旋转自动脱螺纹压铸模实用结构，锁模力计算和工艺参数，论述了模具工作原理和设计要点。
The article discusses the differences in physical mechanism of mode locking by laser pulse injection between the dispersion region at positive group velocity and that at negative group velocity.
本文阐述工作于正、负群速色散区中的光脉冲注入锁模的物理机制的区别。
Locking of preferences in config mode.
在config模式下锁定性能。
I rarely used the four physical buttons at the bottom of the screen (in portrait mode) for locking the screen, browsing, returning to a previous screen, and returning to the home screen.
屏幕底部的四个物理按键在肖像模式下分别用于锁定屏幕、浏览、返回上一屏幕以及并返回主屏幕，但我很少使用。
If many transactions will be updating individual rows, change to row locking mode for a particular table using the following SQL statement.
如果许多事务将更新一些单独的行，则使用下列sql语句将特定表更改为rowlocking模式。
The rational harmonic mode-locking has become a research subject of intense interest due to its application on the generation of ultra- high repetition frequency optical pulse train.
有理数谐波锁模技术是产生高速超短脉冲的重要技术之一，其光时分复用通信技术等领域中有重要的应用价值。
The physical mechanism of nonlinear polarization rotation mode-locking was analyzed in theory.
理论分析了利用非线性偏振旋转效应锁模激光器的机理。
The methods of eliminating self - mode - locking and realizing single longitudinal mode operation in silicate glass laser is reported. The experimental results have been given.
本文报道在硅酸盐钕玻璃激光器中消除激光自锁模现象及实现单纵模运转的方法，并给出实验结果。
In this paper, we analyse the difference between SESAM and dye, and present the initial model of the mechanism of SESAM mode-locking.
本文分析了SESAM锁模与染料可饱和吸收体锁模的区别，提出了SESAM锁模机理的初步模型。
To achieve a steady harmonic mode-locked pulse (HMLP), the theory of rational harmonic mode-locking and the transmission characteristics of a nonlinear amplifying loop mirror were analyzed.
为了获得稳定的谐波锁模脉冲，分析了有理数谐波锁模的理论和非线性放大环镜的传输特性。
The dye laser pulse has been synchronized with the iodine laser pulse by a combination of active-passive mode-locking.
它采用主-被动锁模相结合的染料激光脉冲与碘激光脉冲同步工作。
Introduces the circuit, program flow and operation sequence of the serial-scan mode static locking display.
介绍一种串行扫描方式静态锁存显示的电路、程序流程和工作时序。
Adopt revolving locking mode, which can lock the tube more tightly, and make the tripod more fixed.
采用旋转锁紧方式，能让脚管锁的更紧，让脚架更加稳定。
Objective To explore the influence of topical biomechanical environment in the fracture point after which was fixed with auto control micro motion locking nail (AMLN) on the fracture healing mode.
目的探讨自控微动带锁髓内钉（AMLN）固定后骨折局部生物力学环境对骨折愈合的影响及机制。
The basic structure and the fundamental principle of semiconductor saturable absorption mirrors (SESAM) that are used for passive mode-locking solid-state lasers are introduced.
介绍了半导体可饱和吸收镜(SESAM)的基本结构及使用半导体可饱和吸收镜被动锁模固态激光器的基本原理。
Due to its unique features, ultra-short pulse source have been widely used in many fields. To produce the ultra-short optical pulses, people often utilize the mode-locking technology.
超短脉冲光源凭借着其特有的性质在众多领域都得到了广泛的应用，而锁模技术是产生超短光脉冲的常用方法。
The Transmission mode, structure characteristics, locking units for mechanical leveled unit are also introduced, and accuracy analysis of the leveled unit is also performed.
进行了几种方案的比较，并介绍机械调平装置的传动形式、结构特点、锁紧装置，并对调平装置进行了精度分析。
The differences of the passive mode-locking by the SESAM in the plane-concave stable resonator and the plane-convex unstable resonator lasers were experimentally compared and reasonably explained.
实验比较了SESAM器件在平凹稳定腔和平凸非稳腔激光器中实现被动锁模的差异，并给出理论解释。
The problem that a conventional seat lacks a rotating mode and a locking function after rotation is solved.
它解决了现有的座椅缺少转动方式和转动后锁定功能的问题。
Press ESC to cancel locking mode and double check that the phase display stands still when the tuning fork is struck.
按esc退出锁定模式，并且再次确认相位显示中的方块是在音叉持续发声时停止移动的。
Passively synchronized femtosecond and picosecond laser pulses are obtained by achieving cross mode-locking induced by cross-phase modulation in a dual-wavelength femtosecond ti: sapphire laser.
在双波长钛宝石激光器中通过交叉相位调制实现了飞秒和皮秒脉冲的交叉锁模，得到了被动同步的飞秒和皮秒脉冲。
Passively synchronized femtosecond and picosecond laser pulses are obtained by achieving cross mode-locking induced by cross-phase modulation in a dual-wavelength femtosecond ti: sapphire laser.
在双波长钛宝石激光器中通过交叉相位调制实现了飞秒和皮秒脉冲的交叉锁模，得到了被动同步的飞秒和皮秒脉冲。
应用推荐