Milling process of the whole seal, without dust leakage.
磨粉过程全封闭，无粉尘泄露。
Milling process of the whole seal, without dust leakage.
磨粉过程全密封，无粉尘泄露。
The software is to analyze mathematics model of hot milling process.
热轧模型实用解析软件是一套热轧过程数学模型解析软件。
As metal processing car, sawing, grinding, drilling, milling process.
用作金属加工的车、锯、磨、钻、铣削等工序。
Finally, the optimizing results of the milling process are presented.
最后给出了铣削加工实例的优化结果。
Peripheral milling process is widely used in machining low-rigidity components.
目前低刚度零件的机械加工已广泛采用数控侧铣工艺。
Milling moment is an important mechanical characteristic in the milling process.
铣削力矩是铣削过程中一个重要的物理量。
The chemical milling process forms a tapered portion (18) of the endodontic file (10).
所述化学蚀刻过程形成了牙髓锉(10)的锥形部分(18)。
By analyzing the milling process, the action directions of cut in impact forces are determined.
通过对铣削过程的分析，确定了切入冲击力的作用方向。
The stability and cutting forces in high speed milling process can be forecasted with the model.
利用该模型，可对铣削过程的特征参数如稳定性、切削力等进行预测。
Precisely and reasonably modeling for milling process is the key to study milled surface topography.
精确合理的铣削过程模型是研究铣削加工表面形貌的关键。
The vibration model of ball end milling process concerning the effect of cutter flexibility is presented.
建立了考虑刀杆柔性的球头铣刀铣削振动模型；
So we must adjust the technological process and parameters of the milling process to reach the improved effects.
因此调整了缩绒工艺流程和参数，达到改进的效果。
The unconventional nutrients and amino acids of the fine bran produced in rice milling process have been determined.
对精米加工过程中产生的细米糠常规营养成分及氨基酸进行了分析测定。
This paper researches into the unbalance factor of the cutting force and the cutting area in the face-milling process.
本文研究了端面铣削过程的切削力不均衡系数和切削面积不均衡系数。
This paper introduces a wheel pair NC correcting system, which has the functions of both dynamic balance measure and milling process.
介绍了一种集动平衡测量与校正铣削加工于一体的轮对数控校正系统。
Usually, there exist undercutting phenomena in helical groove milling process, which affect the accuracy and geometrical shape greatly.
螺旋槽成形铣削时普遍存在根切现象，在很大程度上影响到加工精度和几何形状。
The problem that the cutting force is hard to determine in high-speed milling process is solved by using the computer-aided engineering.
用计算机辅助工程的方法解决了高速铣削过程中切削力难以确定的问题。
This article introduces tool radius compensation in CNC milling process, and analyzes over-cutting reasons in using tool radius compensation.
介绍了数控铣床加工中的刀具半径补偿，分析了使用刀具半径补偿产生过切削现象的原因。
Put forward the application of mechanics models, all these work lays the foundation for the selection of cutting parameters in milling process.
提出了力学模型的应用范围，为实际切削加工中切削参数的优化选取提供了理论依据。
To improve the efficiency decreased by feed rate in traditional nc program, a nc program optimization system is developed for rough milling process.
针对传统数控程序中进给速度固定限制加工效率的缺点，开发了面向粗铣加工的数控程序优化系统。
The milling process of X65 pipe steel and the inspection data of mechanical properties (tensile strength, DWTT and hardness)are introduced in detail.
详细介绍了X65卷板的生产流程和有关力学性能（拉伸性能、冲击性能及硬度）的检验结果。
The basic types of dry stoners, their specific advantages and defects, and the main forms for them to be disposed in rice milling process are presented.
对比重去石机的基本类型、各自优缺点及其在加工工艺中的主要配置形式进行了简单介绍，阐述了比重去石机在稻米加工工艺中几种常见且合理的用法。
The chemical milling process for 2219 aluminum alloy tube was investigated using orthogonal test and the optimum formula and technology were established.
对2219铝合金筒段的化学铣切工艺进行了研究，以确定化学铣切工艺的最佳配方和工艺控制要点。
Cutting force models of a single tooth cutter and a multitooth cutter are derived from metal cutting theories and geometric relations of face-milling process.
根据金属切削理论及端铣过程的几何关系提出了单齿和多齿刀具的铣削力模型。
The corners tool path refinement approach is presented to solve the problems occur during the corner milling process of the aeronautical thin-walled components.
本文提出了细化圆角走刀路径的铣削方法，以解决航空薄壁件的圆角铣削加工问题。
The two key techniques of milling process simulation, i. e. geometric simulation technique and physical simulation technique, are summarized and analyzed in this paper.
对铣削过程模拟中的两个关键技术———几何模拟技术和物理模拟技术进行了归纳和分析。
Through analyzing and accounting evocable error of tool's transmutation during milling process, the compensatory method to the error in NC machining has been put forward.
通过分析计算数控铣削过程中刀具变形引起的误差，提出对这种误差的补偿方法。
Adaptive fuzzy control is studied and used to control constrained milling process for constant cutting force. The experiment shows that the control method proposed useful.
讨论了自适应模糊控制的实现方法，并研究了其在有约束的恒力铣削加工过程中的应用。加工实验表明这种方法简单实用。
Adaptive fuzzy control is studied and used to control constrained milling process for constant cutting force. The experiment shows that the control method proposed useful.
讨论了自适应模糊控制的实现方法，并研究了其在有约束的恒力铣削加工过程中的应用。加工实验表明这种方法简单实用。
应用推荐