The microstructure of surface Fe-based infiltrated layer on copper substrate and the bending behavior are investigated.
研究铜合金表面铁基渗层的微观组织以及铜基表面渗层的弯曲行为。
The method of evaluation and analysis of the nature and the microstructure of surface of CF, before or after surface treated, are reviewed.
综述了炭纤维表面处理前后其表面结构和性质的评价方法。
The relationship between surface microstructure of lithium matte glaze and optic characteristic is analysed.
分析了锂质无光釉表面显微结构与釉面光学特征的关系。
The microstructure of the ceramic layer is columnar and its growth direction is perpendicular to the substrate surface.
陶瓷熔覆层的组织为柱状晶。其生长方向与基体表面垂直。
The characterization methods for the microstructure, including micropore structure, surface morphology and topography of carbon molecular sieves (CMS), were reviewed in this paper.
综述了国内外表征碳分子筛(CMS)微结构包括微孔结构、表面形态与形貌的主要方法。
The reason of arc crack on retarder gear surface was analyzed by means of chemical composition analysis, hardness testing, macrostructure and microstructure examination.
通过化学成分分析、硬度试验、宏观和微观检验等方法，对减速机齿轮齿面弧形裂纹的产生原因进行了分析。
A novel method fabricating silver nano-film has been presented, by which we may control the surface microstructure of silver film easily.
提出了一种制备银膜的新方法，此法的优点在于能主动控制银膜表面微观结构。
Scanning electron microscope (SEM) and X-ray diffraction (XRD) were used to measure the surface morphology, the crystal microstructure and the distribution of diamond grain in the film.
用扫描电镜(sem)和X射线衍射(XRD)方法检测了复合膜的表面形貌、晶体显微结构和复合膜中金刚石颗粒的分布情况。
Morphological microstructure, such as surface, interface and surface of coated fertilizer after nutrient being released in water, was studied by scanning electron microscopy (SEM).
用扫描电子显微镜(SEM)对包膜肥料的表面、界面及养分溶解释放后的表面进行了微观形态结构研究。
The microstructure and hardness of the laser modified surface are governed by the laser processing parameters.
激光表面改性层显微组织与显微硬度受激光处理工艺参数的控制。
The results show that 82b wire rod brittle fracture is mainly caused by excessive inclusion, reticulate carbide, lower sorbite in the microstructure, and surface defect of wire rod.
结果表明，82B钢盘条脆断的主要原因是夹杂物级别超标、组织中出现网状碳化物、索氏体含量偏低以及盘条表面缺陷等。
Particle shape, surface morphology and microstructure of skin layers and adhering satellites were studied by using optical and scanning electron microscopy.
用光学显微镜和扫描电子显微镜研究了粉末形状、表面形态和包复层、粘接处的显微组织。
In order to deeply comprehend the wear regularity of chilled alloy cast iron tappet, the influence of surface layer microstructure on wear resistance was studied.
为了深入了解冷激合金铸铁气门挺杆的磨损规律，研究了冷激合金铸铁气门挺杆表层组织对耐磨性的影响。
The crack in quenching boundary of the hydraulic press plunger surface was analyzed by means of chemical composition analysis, microstructure examination and microhardness testing.
采用化学分析、金相检验和显微硬度梯度试验等方法对油压机柱塞表面淬火交界处裂纹进行了分析。
Using high speed schlieren photographs the microstructure of flame front surface in gas explosion was studied from the microscopic view.
通过高速纹影图像从细观角度详细研究了不同传播条件下瓦斯爆炸火焰前锋的细微结构。
A method has been presented to predict the nucleation site density in nucleate boiling based on the investigation of the microstructure of boiling surface.
提出了一种基于沸腾表面微结构分析的预测核态沸腾中汽化核心密度的方法。
The microstructure in shot-peening surface plastic straining layer of several softening and hardening materials are investigated.
研究了软化和硬化材料表面喷丸应变层内的组织结构。
Effects of process parameters of plasma beam surface hardening treatment on hardening layer of boron cast iron and its microstructure and properties are investigated.
研究了等离子束表面硬化工艺参数对硼铸铁淬硬层及其组织与性能的影响。
This review attempts to discuss the effectuality of surface plastic deformation strengthening treatment and the role of main influential factors for different original microstructure of steels.
综述了几种原始组织的材料表面形变强化的有效性，讨论了三个主要因素的作用和相互关系。
The post treatment can improve deformation and surface stress state, refine microstructure and increase hardness of cladding layer.
后热处理可改善变形和表面应力状态、细化组织、提高硬度。
This paper deals with the technique of laser cladding on contact surface of gears, micro hardness distribution, microstructure and properties of cladding and transition layer.
研究齿轮齿面激光熔覆粉末合金的工艺、显微硬度分布、熔覆层及过渡层等的金相组织及性能。
Requirements of purity degree, surface quality and microstructure for steel for cord arc strict.
帘线钢对纯净度、表面质量、金相组织等要求十分严格。
The effects of material composition, working surface treatment and microstructure on wear resistance of powder hot-forging flow oil-seal ring were studied.
研究了粉末热锻浮动油封密封环的材质、表面处理、显微组织对其耐磨性的影响。
The microstructure on the hole surface of CFRP is a very important characteristic of the quality of hole drilling.
碳纤维复合材料的孔壁表面微观形态是孔加工质量的重要特征之一。
Effects of different tempering processes on surface microstructure of indefinite chill cast-iron roller were studied.
研究了回火工艺对无限冷硬轧辊表层基体组织的影响。
This review summarized effects of different implant surface microstructure on osteoblasts at bone-implant interface, in order to guide optimization of implant surface microstructure.
本文综述了种植体表面微结构对种植体-骨组织界面成骨细胞的生物学行为的影响，为研究和设计种植体表面微结构提供参考。
The abrasive mechanism of rolled white cast iron with various matrixes are studied by investigating the microstructure, abrasive surface and mechanical properties of specimens.
通过对不同基体组织轧制白口铁的金相组织、磨损表面和机械性能的分析，研究了具有不同基体组织轧制白口铁的磨损机理。
A new method has been presented to predict the nucleation site density in nucleate pool boiling based on the investigation of the microstructure of boiling surface.
本文提出了一种新的基于沸腾壁面微结构分析的预测核态池沸腾中汽化核心密度的方法。
A new method has been presented to predict the nucleation site density in nucleate pool boiling based on the investigation of the microstructure of boiling surface.
本文提出了一种新的基于沸腾壁面微结构分析的预测核态池沸腾中汽化核心密度的方法。
应用推荐