However, disputes exist on the alloy's microstructure evolution for many years.
然而，对该合金微观结构的演变过程多年来都未能形成统一观点。
The microstructure evolution and properties transform of 70 steel wires in cold drawing were studied.
研究了冷拉70钢的组织演变和性能变化。
The microstructure evolution of ZL111 by heat holding above the liquidus temperatures was investigated.
对ZL 111铝合金在近液相线的温度保温后的铸态组织进行了研究。
The microstructure evolution in HAZ of Welds is a complex procedure, which associates with many factors.
焊接热影响区微观结构演化与诸多因素密切相关，是一个复杂的过程。
The relation of microstructure evolution vs undercooling in Ni-Si eutectic alloy was systematically investigated.
系统研究了该合金的微观组织演化与熔体过冷度之间的关系。
The importance of numerical simulation of microstructure evolution during metal hot forging was introduced in this paper.
阐述了金属材料塑性加工中微观组织演变数值模拟的重要性。
The effect of elasticity on the microstructure evolution of alloys containing coherent precipitates was studied by phase field model.
采用相场模型对共格沉淀析出过程微观结构演化进行模拟研究。
The microstructure change of Stelmor line is simulated through coupling the models for microstructure evolution and temperature field.
通过组织演变模型和温度模型的耦合计算，模拟出斯太尔摩风冷线上线材的组织变化过程；
The microstructure evolution and partially remelting processing of two-phase-region casting AZ91D magnesium alloy ingots were investigated.
对在两相区铸造进行半固态制浆所得az91 D镁合金坯料的部分重熔工艺条件及组织演变进行了研究。
Processing map was also established based on the dynamic materials model. The microstructure evolution at different conditions was analyzed.
根据动态材料模型建立并分析了其热加工图，同时观察了变形组织。
The microstructure evolution of Q235 plain carbon steel in multi-pass hot deformation was investigated by means of hot compression simulation.
利用热模拟压缩变形实验研究了Q 235碳素钢多道次热变形及后续处理过程的组织演变规律。
The microstructure evolution during the warm deformation is observed by optical microscopy (OM) and transmission electronic microscopy (TEM).
通过光学显微镜和透射电镜观察了温变形中的微观组织演变。
The microstructure evolution of Q235 plain carbon steel in multi-pass hot deformation was investigated by means of hot compression simulation.
利用背散射电子衍射取向成像技术分析了在热模拟单向压缩条件下Q235碳素钢应变强化相变中铁素体晶粒的取向（差）变化特点。
We get the conclusion that the microstructure evolution of electrolytic copper powder and atomizing copper powder was different in SPS process.
得到电解铜粉和雾化铜粉在SPS烧结过程中显微组织演变特征和规律不同的结论。
Rotational Dynamic Recrystallization (RDR) mechanism which based on mechanics assistance can well explain the microstructure evolution within the ASB.
一种基于力学辅助的旋转式动态再结晶(rdr)机制可以很好的解释as B内组织的演化过程。
Ceramics properties are closely related to its microstructure, so studying microstructure evolution process in ceramics sintering process is essential.
而陶瓷的性能与微观结构密切相关，所以研究陶瓷烧结过程中的微观结构演化至关重要。
The microstructure evolution of pearlitic steel in ECAP was investigated by means of transmission electron microscope and scanning electron microscope.
并用透射电镜、扫描电镜研究了珠光体组织的演变特点和渗碳体的变形。
A Rotational Dynamic Recrystallization (RDR) mechanism which based on mechanics assistance can well explain the microstructure evolution within the ASB.
一种基于力学辅助的旋转式动态再结晶(rdr)机制可以很好的解释as B内组织的演化过程。
The microstructure evolution, which is governed by temperature, strain and strain rate during hot metal forming, is a key factor to the mechanical properties.
金属在热成形过程中的微观组织演变是影响产品力学性能的关键因素，该演变过程取决于温度、应变和应变速率。
The regularity of the microstructure evolution during the alloy heat treated at different conditions is investigated by the analysis of finite element method.
利用有限元方法对热处理期间的组织演化进行了分析；
The flow behavior and dynamic recovery and recrystallization, as well as microstructure evolution, of AA7005 aluminium alloy in hot compression were investigated.
研究了AA70 0 5合金高温压缩变形时的流变应力、动态回复与再结晶以及变形组织变化特征。
The processing map and activation energy map of the alloy were established by using tested data, and microstructure evolution of deformed samples was also examined.
利用实验数据建立了合金的热加工图和热激活能图，对变形过程中组织演化进行了研究。
Microstructure evolution and the relationship between microstructure and mechanical properties of Q235 steel were studied by thermal simulation and industrial tests.
通过热模拟试验和工业性试验，研究了Q235钢微观组织演变规律及其与力学性能的关系。
Subroutines of non-quenched steel microstructure evolution are exploited, and structure property variable regular of non-quenched steel during RSM process is exploited.
开发了非调钢组织演变子程序，研究了非调钢在减定径机组轧制过程中组织性能的变化规律。
Pretreatment condition, i. e. cold or hot deformation, has important effects on microstructure evolution, and deformation of samples is a necessary step in SIMA process.
冷、热变形预处理条件对组织演变产生一定的影响，给试样施加变形是SIMA工艺的必要步骤。
The microstructure evolution models were implemented into the finite-element code, which allowed the prediction of distributions of grain size in the volume of the forging.
有限元分析方法通过应用微观结构演变的编码实现了预测、仿真锻造过程中晶粒的演变过程。
This paper introduces an advanced model of coherent precipitation kinetic as well as the development of computer simulation for the microstructure evolution of Ni-based alloys.
介绍了一种先进的共格沉淀动力学模型，以及运用计算机对镍基合金共格沉淀过程组织演化模拟取得的进展。
It is important to study deformation behavior, deformation mechanism and microstructure evolution of semi-solid alloys because the semi-solid alloy has special characterization.
由于材料在半固态下具有特殊性质，开展其变形行为、变形机理和组织演化等方面的研究显得尤为重要。
It is important to study deformation behavior, deformation mechanism and microstructure evolution of semi-solid alloys because the semi-solid alloy has special characterization.
由于材料在半固态下具有特殊性质，开展其变形行为、变形机理和组织演化等方面的研究显得尤为重要。
应用推荐