The microstructure and morphology of single polymer chain.
单个高分子链的结构和形态。
Different prepared conditions, microstructure and morphology of nano-ZnO were investigated by means of XRD and TEM.
借助于XRD、TEM等测试手段，对纳米氧化锌粉体的制备条件和其对粒度、形貌的影响进行了分析研究。
There is visible transitionary character in microstructure and morphology, transformation mechanism, and transformation dynamics.
贝氏体在转变机理上、动力学上、组织形貌上都存在明显的过渡性。
The microstructure and morphology of matrix steel (6422) cutter with continuous cooling and isothermal cooling heat treatment were studied.
分析了基体钢(6422钢)滚刀实体分别经连续冷却和等温冷却热处理后的显微组织和形貌。
The optical performance of the fused-taper fiber device is determined by microstructure and morphology of the fused taper region, which are determined by technological conditions.
熔锥型光纤器件的光学性能由熔锥区的微观结构和形貌决定，而微观结构和形貌又由工艺条件决定。
Microstructure of the joints and fracture morphology of implant samples were analyzed.
分析了插销焊接接头的组织和插销试样的断口形貌。
The geometrical morphology data and the relative contents of microstructure of umbilical cord vein were measured by the computer image analysis system.
用计算机图像分析系统测量脐带静脉的几何形态及显微结构成分的含量。
Scanning electron microscope (SEM) and X-ray diffraction (XRD) were used to measure the surface morphology, the crystal microstructure and the distribution of diamond grain in the film.
用扫描电镜(sem)和X射线衍射(XRD)方法检测了复合膜的表面形貌、晶体显微结构和复合膜中金刚石颗粒的分布情况。
The characterization methods for the microstructure, including micropore structure, surface morphology and topography of carbon molecular sieves (CMS), were reviewed in this paper.
综述了国内外表征碳分子筛(CMS)微结构包括微孔结构、表面形态与形貌的主要方法。
In addition, the microstructure of the MgO thin films were examined with X-ray diffraction (XRD), Atomic Force Morphology (AFM) and Transmission Electron Micrograph (TEM).
同时，用X射线衍射(XRD)、原子力显微电镜(afm)和透射电镜(TEM)对薄膜的微观结构进行了分析。
The microstructure, surface fracture morphology, hardness and tensile strength of the failed 45 steel connecting bolt were analyzed and tested.
对45钢连接螺栓断裂件的显微组织、断口形貌、硬度和抗拉强度进行了观察分析和测试。
The microstructure of the alloy as well as morphology and distribution of carbides were examined by using light microscope, SEM and X-ray diffractometer.
采用光学显微镜，扫描电子显微镜及X光衍射研究了合金的显微组织、碳化物形态及分布。
The morphology and color characteristic of microstructure of the phosphide eutectic can be showed with cold and hot erosion method.
用热浸蚀方法可显示磷共晶中组织组成物的形态和颜色特征。
The chemical composition, hardness, microstructure and fracture morphology of ZG270-500 cast-steel of cracked lifting instrument were detected and analyzed.
对断裂起重机吊具zg270- 500铸钢的化学成分、硬度、显微组织、断口形貌等进行了检测和分析。
Particle shape, surface morphology and microstructure of skin layers and adhering satellites were studied by using optical and scanning electron microscopy.
用光学显微镜和扫描电子显微镜研究了粉末形状、表面形态和包复层、粘接处的显微组织。
The microstructure and fracture morphology of directly etched fracture sample of rail steel were observed. The relatinos between the microstructure and fracture morphology were discussed.
在经过腐蚀的钢轨钢拉伸断口上进行了显微组织和断口形貌的同步观察，直接观察到了断日形貌特征与显微组织的某些相关结果。
On the basis of rationality and easy operation, we divide microstructure morphology of clayey soils, define main structural parameters and determine algorithms.
在合理且便于操作的基础上，对粘性土微细结构形态体系进行划分，并对主要结构参数进行定义和确定算法。
Evolution of pore morphology and cell wall microstructure of aluminum foam during powder metallurgical foaming was studied.
研究了粉末冶金法制备泡沫铝时泡沫孔结构及胞壁微观组织变化的规律。
The growth rate, film morphology, and microstructure are not sensitive to the deposition pressure.
而工作气压对生长速率、薄膜形貌和微观结构的影响不明显。
Model of growth, surface morphology, microstructure and of the Uraniun films by magnetron sputter deposition have been investigated by scanning transmission electron microscopy(STEM).
采用扫描透射电镜（STEM） ，研究了铝上磁控溅射沉积铀薄膜的形貌、组织、结构以及铀薄膜的生长模型。
The morphology and microstructure of SiC whiskers have been analyzed by such modern instruments as SEM.
利用SEM分析手段对自制的碳化硅晶须进行了形貌、结构的观察分析。
The morphology and microstructure were described via DTA-TG , XRD, SEM. Surface of the thin film was uniform and dense.
通过DTA-TG、XRD、SEM 对薄膜的结构和形貌进行了表征，结果表明：抗静电复合薄膜表面均匀致密。
Bamboo fiber and hemp fiber structure and properties similar to the microstructure morphology and hemp fibers have many similarities, not easy to distinguish.
竹原纤维与麻类纤维的结构及性能相似。其显微形态与麻类纤维有许多相似之处。不易区分。
The fracture reason of reducer shaft was analyzed by means of morphology and microstructure analysis, chemical composition analysis, mechanical properties test, SEM micro-morphology analysis.
采用宏微观形貌分析、化学成分分析、力学性能测试、SEM微观形貌分析等手段，分析了减速机轴断裂的原因。
The corresponding relations between temperature field and microstructure of welding zone were validated by comparing simulation results with microstructure morphology.
通过模拟温度场结果与焊缝区组织的比较，验证了不同的温度场与不同焊缝组织的对应关系。
The fracture morphology, hardness, microstructure and chemical composition of injector matching parts were investigated.
对喷油器偶件的断口形貌、硬度、金相组织及化学成分进行了分析。
The based-titanium whiskers made by our lab were studied by AFM and the morphology and the surface microstructure images were also obtained.
利用AF M对本课题组制备的钛基晶须进行了研究，得到了形貌图像和表面结构图像。
And the shot peening surface micro morphology is acute deformation of surface microstructure, lattice distortion and bidirectional cross-slip;
喷丸表面微观形貌为表层组织剧烈变形、晶格扭曲和双向交滑移；
The surface morphology, microstructure and oxidation resistance were characterized by SEM, XRD, TG and other methods for the coated powder.
用SEM、XRD、 粒度分析和热重分析表征不同包覆厚度的双金属粉和原始镍粉的表面形貌、包覆结构及其抗氧化性。
The microstructure, structure and morphology of the coating were analyzed by XRD and SEM.
用XRD、SEM检测了涂层的金相组织、结构及形貌。
应用推荐