This is the principle of microcomputer software.
这是微机原理有关的软件。
The idea of modularization design is adopted in the single chip microcomputer software.
单片机软件采用了模块化设计思想。
The compiled microcomputer software has the merits of easy application, quick computation speed and good convergence.
编制成的微机软件使用方便、计算速度快、收敛性好，可用来计算任意时刻井筒和地层温度分布。
This paper introduces an algorithm of adaptive Kalman filter and its microcomputer software for extracting EEG signal.
本文介绍了一种提取脑电信号的自适应卡尔曼滤波算法及其微机处理软件。
Modularization was adopted for microcomputer software compiling so that the compiling of the software was easy and simple.
微机软件编写采用了模块化，使软件的编写更方便、简单。
The special microcomputer software for calculation of slot electric field is worked out with fe method, and the field distribution in stator slot winding of large generator is calculated.
采用有限单元法，编制了适用于微机系统的槽部电场计算专用软件，计算了大型发电机定子线圈槽部电场的分布。
The article can also be the reference for software programming of microcomputer interlocking station (with track cut point signal).
也可作为微机联锁车站(亦有股道分割点信号机)软件编程时参考。
The apparatus consists of a single board microcomputer, propeller type velocity sensor, tail fin type flow direction sensor and corresponding interface circuits and software.
该仪器以单极微机为核心，配置旋浆流速传感器、尾舵式流向传感器、相应的接口电路和软件。
The paper presents the control strategy of the microcomputer with knowledge base, and describes the software and block diagram of work of the two-stage microcomputer control system.
本文给出了带知识库的微型计算机控制策略，介绍了两级微机控制系统的软件和工作框图。
The practices prove that the antijamming measures of the software combined with the hardware ensure the microcomputer system for reliable run in the welding industrial circumstances.
实践证明，软、硬件相结合的抗干扰措施保证了微机系统在焊接工业环境中的可靠运行。
The Micro professor single board Microcomputer implements performance of logic control using software structure.
小教授单板机是利用软件设备来完成逻辑控制的功能。
An optical stabilizer for semiconductor laser controlled by monolithic microcomputer is studied in this paper. The operation principle, hardware and software are described systematically.
介绍了单片机控制的半导体激光器的稳光强器，系统地阐述了其工作原理、硬件及软件设计。
This paper introduces the hardware and the software of microcomputer control system for sign typewriter on the railway vehicle bearing.
本文介绍铁道车辆轴承标牌打字机的微机控制系统的硬件结构和软件特点。
Based on the analysis of the theory of vulcanization, the control of rubber vulcanization, the construction of microcomputer control system, hardware and software design were described.
在分析橡胶硫化机理的基础上，阐述了胶料硫化的控制方法、微机控制系统的组成、硬件配置和软件设计。
The article has detailed the hardware and software design of this microcomputer control system.
详细介绍了这个微机控制系统的硬件电路及软件设计。
The article treats of the software of the dynamic weighbridge with microcomputer.
本文介绍了一种双台面微机动态轨道衡的新型软件。
The software system for a universal microcomputer detector requires the designer solving a series problems of adaptability: adaptable to the hardware, users, and environment.
通用微机检测系统软件要求设计者解决多方面的适应性问题：对硬件，用户，环境的适应。
Real time receiving facsimile weather charts through microcomputer is introduced. In this paper, the corresponding software runs under WINDOWS3 1.
对通过微机实时接收气象传真图进行了介绍，并说明接收软件是在windows3.1环境下开发的。
The structure and the principle of auto board shears have been introduced with the design method of hardware and software implemented by 8051 single chip microcomputer.
介绍了自动剪板机系统的结构组成和工作原理，叙述了8051单片微机实现其生产过程控制的硬件与软件的设计方法。
This paper describes a design scheme of the hardware and software, with which the microcomputer controls electronic display consisting of LED point lattice.
本文介绍由发光二极管组成的点阵作电子显示屏，并由微型计算机进行控制的硬件和软件设计方案。
The developing process of single board microcomputer has been discussed by combining of hardware and software.
对单板机以逐步集成法和硬软件结合的开发过程进行了讨论。
To realize the large-size image processing for digital image stored in microcomputer with PCX format, a software is designed.
在微机上，对以PCX文件格式存贮的数字图象，用软件方法给出了实现大幅面图象处理的一种方法。
The platform can implement complete function test and safety test for the railway signalling microcomputer interlocking software, so it can improve the safety and reliability of tested software.
运用测试平台能实现对微机联锁软件的功能测试和安全性测试，提高联锁软件的可靠性和安全性。
The control principle and software of the microcomputer controller used in DC impulse seam welding are introduced in this paper.
本文介绍了直流冲击波缝焊微机控制器的控制原理及软件系统。
The general drilling depth system is composed of a single-chip microcomputer, a personal computer, hardware and software.
用单片机和微机共同构成的通用钻井深度系统由硬件和软件组成。
This paper developed a practical system software of microcomputer numerical control system based on the analysis of the hardware construction and principle of the AC servo X - Y table.
本文针对微机数控交流伺服X-Y工作台的硬件结构以及其工作机理，介绍了一套可实际应用的微机数控交流伺服系统软件的开发。
The paper presents a practical method of digital wattmeter based on microcomputer and software.
本文介绍了一种基于微机的软件化数字功率表的实现方法。
In this paper, we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.
介绍了以AT 89s52单片机为核心的金相切割机控制系统原理和软硬件设计方法。
The system contains measuring instrument, microcomputer and software.
系统由测量仪主体、微机、软件系统构成。
IBM PC and single chip microcomputer communication hardware circuit, software interface and measure to improve reliability of communication.
IBMPC机与单片机通讯的硬件电路、软件接口以及提高通讯可靠性的措施。
应用推荐