A simple chip microcomputer controlled inverter pulse MIG welding machines is developed in this paper.
本课题研制了一台单片机控制的逆变式脉冲MIG焊机。
This paper introduces a microcomputer controlled system for flux weighing and discharging in LD steelmaking.
本文介绍一个转炉炼钢副原料称量及卸料的微机控制系统。
The Configulation and principle of a newly developed microcomputer controlled ignition system are presented.
本文介绍一种新研制的微机控制点火系统的构成和工作原理。
This paper presents a microcomputer controlled automatic weighing and packaging system with digital display.
介绍一种采用微电脑控制、数字显示的自动称量包装系统。
A microcomputer controlled IGBT converter for stud welding in the manufacture of car body has been developed.
对微机控制的轿车车身焊装线用螺柱焊igbt逆变电源进行了研究。
The paper mainly describes the way and principle about the microcomputer controlled system for 701 test stand.
本文主要介绍701试验台微机控制系统实现方法和原理。
Finally, it gives a practical application sample of microcomputer controlled roll shape detecting system with linear CCD.
并给出了应用高分辨率线阵CCD构成微机辊形检测系统的应用实例。
The microcomputer controlled test stand 701 is equipped with a microcomputer controlled system on the original 701 test stand.
微机控制701试验台是在原701试验台的基础上加装了一套微机控制系统。
The basic principle of microcomputer controlled nitriding and its contrast tests with traditional process are introduced briefly.
介绍了微机可控渗氮的基本原理，进行了气体渗氮的传统工艺与微机气体渗氮工艺的对比试验。
The microcomputer controlled test stand 701 adopts power stepping motor to drive the original operating valve to carry out tests.
此种微机控制701试验台，是采用功率步进电机驱动原操作阀进行试验的。
In the last part, I put forward the scheme of monolithic chip microcomputer controlled, DDS based short wave DHF frequency synthesizer.
最后，本论文提出了单片机控制的，基于DDS的短波差分跳频频率合成器的设计方案。
The results of dynamometer tests proved that the microcomputer controlled ignition system has a better effect in improving engine per...
台架试验结果表明，该微机控制的点火系统对改善发动机的性能有较好的效果。
The results of dynamometer tests proved that the microcomputer controlled ignition system has a better effect in improving engine performance.
台架试验结果表明，该微机控制的点火系统对改善发动机的性能有较好的效果。
This paper discusses how to drive the execution unit effectively with single D/A converter in a microcomputer controlled multiplexing time-sharing system.
本文论述在微机多路分时控制系统中，如何用单个D/A变换器，对多路的执行机构实现有效地驱动。
The hardware and software of a developed 8098 single-chip microcomputer controlled MOSFET precise spot welding power source have been introduced in the paper.
对所研制的由8098单片机控制的MOSFET精密点焊电源的硬件及软件进行了介绍。
This paper describes a microcomputer controlled autocorrelator and datum acquisition processing system for the measurements of picosecond and femtosecond pulses and dyna-mic processes.
本文介绍一种用于皮秒和飞秒级超短脉冲和超快过程测量的微机控制光学自相关器和实验数据获取与处理系统。
Described are the performance, features and technical parameters of the low temperature resistant and microcomputer controlled single car tester for railway passenger and freight cars.
介绍了铁路客货车用耐低温微控单车试验器的性能、特点与技术参数。
Based on the study on the analogously controlled and microcomputer controlled power source, a new 8098 single-chip microcomputer controlled welding machine is developed for the pulse TIG welding.
在模拟控制和微机控制技术研究的基础上，开展了8098单片机控制脉冲tig焊机的研制工作。
A microcomputer controlled IGBT inverter power source for pulsed MIG welding is developed. It realizes the self adaptive control and closed loop control of arc voltage in pulsed MIG welding process.
建立了微机控制和IGBT逆变式脉冲MIG焊电源系统，实现了MIG焊接过程弧压自适应闭环控制。
This paper describes the principle, derivation of the engineering formula, software functions and characteristics of a microcomputer controlled dynamic length measuring device for red-hot steel plate.
本文叙述了微机控制的红热钢板动态测长仪的原理、工程公式的导出、软件功能及其特点。
Microcomputer controlled with alarm for overload and lack of material.
微电脑控制，缺料、过载报警。
Microcomputer controlled electro-contact touch needle is used to find center of the hole in X orientation and measure diameter in Y orientation.
电接触探针在微机控制下，在X方向找中心，在Y方向进行孔径测量。
In this paper the principle and design of a microcomputer-controlled PLL frequency synthesis digit tuning system is discussed.
本文叙述了一个用微机控制的锁相环频率合成数字调谐系统的原理和设计。
A new microcomputer-controlled versatile spectrofluorometer with the function of constant energy and variable-angle synchronous scanning has been developed.
报道一种微机控制带恒能量同步扫描和可变角同步扫描的多功能荧光分光计。
The technology for its auto-adjustment can greatly help improve the exactness of microcomputer-controlled feed proportioning.
这种技术的应用无疑对提高微机配料精度是十分有益的。
This paper introduces the design idea and implementation method of a microcomputer-controlled system's software and hardware in a feed processing plant.
本文介绍一个饲料厂微机控制系统的软、硬件设计思想与实现方法。
Factors affecting the precisions of a microcomputer-controlled platform draughter are discussed in the view of the control Theory in this paper.
本文从控制理论的角度出发分析了影响微机控制的中型绘图机精度的各种因素。
The stress relaxation test of saturated silty mudstone under triaxial compression is carried out on the rljw-2000 rock microcomputer-controlled rheology servo test system by step loading method.
采用rljw—2000型岩石三轴流变伺服仪，在分级加载条件下完成饱和粉砂质泥岩的三轴压缩应力松弛试验。
The stress relaxation test of saturated silty mudstone under triaxial compression is carried out on the rljw-2000 rock microcomputer-controlled rheology servo test system by step loading method.
采用rljw—2000型岩石三轴流变伺服仪，在分级加载条件下完成饱和粉砂质泥岩的三轴压缩应力松弛试验。
应用推荐