This paper describes a microcomputer compound control system for single phase resistance-heated furnace based on power and temperature regulations with uniform distribution and zero trigger.
本文介绍一个单相电阻炉均布式零触发调功调温的微机复合控制系统。
Based on the analysis of the theory of vulcanization, the control of rubber vulcanization, the construction of microcomputer control system, hardware and software design were described.
在分析橡胶硫化机理的基础上，阐述了胶料硫化的控制方法、微机控制系统的组成、硬件配置和软件设计。
In this paper, we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.
介绍了以AT 89s52单片机为核心的金相切割机控制系统原理和软硬件设计方法。
This paper introduces the principles, functions and practical system of a Marine engine monitor based on microcomputer control.
本文介绍用微型计算机控制的船舶机舱集中监督系统的工作原理、功能特点及实际系统。
The principle of microcomputer-based temperature and level control system is given and its operational experience in management and maintenance is introduced.
叙述锅炉温度、水位微机自动控制系统的原理及系统在管理维护方面的运行经验。
Based on multi microcomputer, the automatic control system of pipeline all position welding process is developed. The system structure, working principle and software design are described.
建立了基于多微处理器的管道全位置焊接自动控制系统，描述了其系统结构、工作原理和软件设计。
This paper introduces a kind of new and practical traffic lights system which is based on single-chip microcomputer control.
介绍了一种新型实用交通灯单片机控制系统的设计方法。
A stepping motor control system based on AT89C52 chip microcomputer was described.
提出了一个由at89c 52单片机控制步进电机的实例。
The detector based on virtual instrument is proposed to ensure the control performance of microcomputer control system for diesel locomotive.
为了保证内燃机车微机控制系统的控制性能，提出采用基于虚拟仪器的检测装置。
A design method of microcomputer closed-loop scanning and control system based on grating check is presented.
提出了一种基于光栅检测的单片机闭环扫描控制系统的设计方案。
This paper designs a microcomputer control system based of upper and lower structure for pulse electrochemical polishing gear process.
针对齿轮的脉冲电化学光整加工的实际特点 ，设计了一套基于上下位机结构的微机控制系统。
This paper presents a microcomputer based automatic control system for a temperature testing chest.
介绍了一种温度试验箱的微机自动控制系统。
This paper presents the design of a new style single-phase electronic load system based on 80c196kc single-chip microcomputer according to the principle of PWM control voltage inverter.
本文根据PWM控制电压逆变器的原理，设计了一种基于80c196 K C单片机的新型单相电子负载系统。
A new type of numerical control system with double CPUs is designed, which is based on LG97L52 single-chip microcomputer and combines PLC functions with MNC functions.
基于LG97 L 52单片机设计了一种双cpu结构的新型数控系统，该系统将P LC的功能与MNC的功能融为一体。
The control system of the grinder is based on GMS97L52 single - chip microcomputer and has functions of automatic division, automatic grinding wheel feeding and automatic grinding repetition.
磨刀机的控制系统基于GMS97 L 52单片机，具有自动分齿、砂轮自动进给、自动重复磨削等功能。
Although the testing system of Microcomputer-based Protection device has been coming into maturity, testing system of distributed stability control device is just in the beginning nowadays.
相对于继电保护装置测试系统的成熟，稳定控制装置的测试系统可以说还是处在刚刚起步的阶段。
The nacelle control system of intelligent wind generator is based on fuzzy control. Host computer adopted the fuzzy controller 80c552 of single chip microcomputer.
基于模糊控制的智能风力发电机机舱控制系统，主机采用单片机模糊控制器80c552。
The protection of feeder line in DC traction supply system is based on microcomputer, which is used to control and protect the high-speed circuit breakers.
直流牵引供电系统的馈线保护以微处理器为基础，用来完成对直流快速断路器的控制和保护。
This paper introduces a system of frequency measurement and control system based on single-chip microcomputer control.
本文在对单片机小系统进行研究的基础上，介绍了一种由单片机控制的频率测量控制系统。
All the testing items are based on automatic control by single chip microcomputer to ensure the system to realize automatic printing automatic showing and keyboard input etc.
所有试验项目均以单片机自动控制为宗旨，保证系统实现自动打印、自动显示以及键盘输入等功能。
This paper developed a practical system software of microcomputer numerical control system based on the analysis of the hardware construction and principle of the AC servo X - Y table.
本文针对微机数控交流伺服X-Y工作台的硬件结构以及其工作机理，介绍了一套可实际应用的微机数控交流伺服系统软件的开发。
This paper deals with the designs of the hardware and software based on the HSO of 8098 single-chip microcomputer as the way of control signal in the si-control power modulation system.
该文介绍了在可控硅功率调节系统中，采用8098单片机hso端作为控制信号输出通道的硬件和软件设计。
The microcomputer system based on the single chip microcomputer achieves temperature control on the ZLQ - 400WD vacuum welding furnace.
本文给出了采用单片机对ZLQ-400WD真空钎焊炉温度进行测控的系统。
In this paper, an intelligent system of adaptative control based on a microcomputer is presented.
本文介绍了用于普旋工艺的计算机自适应智能控制系统。
This paper analyses an automatic detecting and control system of transfusion speed, based on infrared detection and single-chip microcomputer control technology.
介绍了一种基于红外检测技术与单片机控制技术的液体点滴速度自动测控系统，阐述了系统的硬件组成、工作原理和软件设计。
Also a production line automatic control system based on C8051F020 single chip microcomputer is developed.
研制了基于C8051F020单片机的生产线自动控制系统。
An intelligent fire two alarm and linkage control system based an AT89C55 single-chip microcomputer is designed.
设计了一种基于AT 89 C 55单片机的智能火灾两级报警与联动控制系统。
This system based on single-chip microcomputer control through serial GPRS module as the client, in remote PC host based on VC technical data service center.
本系统是以单片机通过串口控制GPRS模块作为客户端，在远程PC主机上建立以VC技术建立数据服务中心。
To avoid the disadvantage of general temperature control system based on single chip microcomputer, and acquire perfect control result, the method of PID based on fuzzy was used in the system.
该系统还采用模糊pid方法进行温度控制，能克服普通的单片机pid温度控制系统的一些不足之处，达到较为理想的控制效果。
To avoid the disadvantage of general temperature control system based on single chip microcomputer, and acquire perfect control result, the method of PID based on fuzzy was used in the system.
该系统还采用模糊pid方法进行温度控制，能克服普通的单片机pid温度控制系统的一些不足之处，达到较为理想的控制效果。
应用推荐