The micro morphology of fiber surface was analyzed by SEM, and the active functional group on the fiber's surface was analyzed by XPS.
利用扫描电镜和电子能谱，进行了纤维表面形貌分析及表面活性官能团分析。
And the shot peening surface micro morphology is acute deformation of surface microstructure, lattice distortion and bidirectional cross-slip;
喷丸表面微观形貌为表层组织剧烈变形、晶格扭曲和双向交滑移；
The macro characteristics, micro morphology, metallographic structure and carburized layer depth of the fractured teeth were observed and analyzed.
对断齿齿面的宏观特征、微观形貌、显微组织和渗层深度进行了观察、测试与分析。
The micro morphology of low carbon steel cyclic deformed with low cycle impact fatigue was investigated it was found that the cycle deformation is caused by slipping.
观察了低碳钢在低周冲击疲劳过程中循环形变的显微特征。结果表明：循环形变主要由滑移引起。
The epidemic micro morphology of 9 sections, 17 species 1 variety in Hypericum and 2 species in Triadenum was comparatively observed with the help of scanning electron microscopy.
利用扫描电镜比较观察金丝桃属9组1 7种1变种和三腺金丝桃属2种植物叶表皮的微形态。
The microstructure characteristics, macro and micro fracture morphology of brittle broken embedded casting closure of T9815 turbines were investigated by means of metallographical examination and SEM.
借助光学显微镜、扫描电镜等手段，对用埋铸法生产的T9815气轮机组隔板断裂部位的金相组织特征，宏观和微观断口形貌等进行了研究。
The effect of micro structure, morphology on strength and plasticity has been diss.
同时讨论了显微组织及其形态对强塑性的影响。
The main character of these micro barrens is that their genetic processes were affected by wind with the result of morphology oriented to the direction of wind.
这些形态的主要类型有波痕状微溶痕、定向脑纹状溶痕及多种脑纹石。
The morphology of sulphide inclusions in sulphur-comprising micro alloyed steel manufactured by converter after rolling was observed.
用金相显微镜、扫描电镜和能谱观察和分析了转炉生产的含硫非调质钢轧后硫化物夹杂的形貌。
This is ideal optical instrument for micro observation in metallographic structure and surface morphology. It is suitable for research in metallography, mineralogy, precision engineering, etc.
适用于金相组织及表面形态的显微观察，是金属学、矿物学、精密工程学研究的理想仪器。
The fracture reason of reducer shaft was analyzed by means of morphology and microstructure analysis, chemical composition analysis, mechanical properties test, SEM micro-morphology analysis.
采用宏微观形貌分析、化学成分分析、力学性能测试、SEM微观形貌分析等手段，分析了减速机轴断裂的原因。
The simulated results show that using the method can not only reveal dendrite morphology and micro-segregation but also represent the recalescence phenomenon.
模拟结果显示这种方法可以显示出枝晶形貌和显微偏析，同时可以再现凝固过程中的再辉现象。
As a result, the chemical coupling of compatible agent plays an important part in the amelioration of interface combination between two phases and micro-structure morphology of blands.
结果表明，界面相容剂的化学偶联对促进两相之间的界面结合和改善共混物的微观结构形态起着重要作用。
The specimen was scanned and reconstructed by means of Micro-CT, images of density field were obtained, and the 3D crack morphology was extracted.
采用微焦点CT对疲劳试样进行了扫描与重建，获得了密度场图像库，并提取了试样内部的三维裂纹形态。结果表明裂纹以体的形式存在。
Effects of nano silicon sol on micro-morphology and corrosion behavior of organic composite film made up of water soluble acrylic resin and molybdate were investigated.
研究纳米硅溶胶改性剂对水溶性丙烯酸树脂和钼酸盐组成的有机复合膜微观形貌及腐蚀行为的影响。
The morphology and the structures of the micro arc oxidation ceramic layer was observed and analyzed.
观察、分析了镀铝层表面微弧氧化陶瓷膜的微观形貌以及组织结构；
The results of SEM, TEM, SAED and XRD show that the direction of gas current and the physical or chemical changes of catalyst grain cause the morphology variety of carbon micro-coils.
结果表明，反应气流的流向以及催化剂在反应过程中发生的物理和化学变化是导致碳微线圈形态变化的两个重要原因。
With combination of field and pot-culture method a study was carried out on the in-creasing effects of different morphology of micro-element fertilizers on maize.
采用大田与盆栽相结合的方法，研究了不同形成微肥对玉米的增产作用。
The micro-morphology of leaf abaxial epidermis of 12 species(including varieties and forma) of Fimbristylis from shandong were studied under light microscope.
利用光学显微镜观察了飘拂草属12个类群（包括变种和变型）的叶片下表皮微形态。
The results showed that seed coat micro-morphology had the stable characteristics, which was not relative to the distribution zone.
结果表明：鸢尾属植物种子表面微形态特征具有种的稳定性，与分布区无关；
The applicable effects of waterborne and solventborne UV curable leather finishing was compared and the micro-morphology of leather was observed and the air permeability was accurately calculated.
对比了水性与溶剂型UV皮革涂饰剂在皮革表面的应用效果，并对皮革表面微观性能及透气度进行了表征和计算。
The macro-morphology, micro-morphology and fracture morphlogy of failure die casting dies were analyzed.
利用扫描电镜对失效压铸模具热疲劳裂纹的宏观、微观、断口形貌进行了分析。
The elements, phase structure of quartz and micro-morphology of six types of granite in Guangxi were analyzed by SEM, EDX XRD.
使用扫描电镜、能谱仪、X射线衍射仪，对广西六种典型花岗岩所含元素、石英相结构及微观形貌进行了测试分析。
In this paper, a debris micro-morphology measurement and analysis system is developed and applied to the ferrography with the aid of microcomputer image analysis technology.
本文研制了一种将微机图象处理技术应用于铁谱技术的磨屑显微分析系统。
The micro-morphology of log-cultivated Phellinus igniarius, hymenium , basidiospore, conical seta and the discrete structure of mycelia were observed under scanning electron microscope.
采用扫描电子显微镜观察人工栽培桑黄子实体的显微形态及其结构，如菌管、子实层、担孢子、锥形刚毛及离散菌丝结构等。
The microstructure of the oxide film morphology phase composition and micro-hardness changed, and the oxide film formation mechanism was studied by om, XRD, SEM and HV analysis methods.
用OM、XRD、SEM、HV分析研究氧化膜的微观组织形貌、相组成及显微硬度的变化，并对氧化膜生成机理进行探讨。
The mechanical properties, wear properties and micro-morphology of the prepared blend were studied.
并对共混物的力学性能、磨耗性能及微观形态进行了研究。
The morphology of sulphide inclusions in sulphur-comprising micro alloyed steel manufactured by converter after rolling was observed.
本文研究了转炉生产含硫非调质钢中硫化物夹杂的控制方法。
The morphology of sulphide inclusions in sulphur-comprising micro alloyed steel manufactured by converter after rolling was observed.
本文研究了转炉生产含硫非调质钢中硫化物夹杂的控制方法。
应用推荐