To make a transducer by painstakingly micro-machining a brittle block of ceramic material can take many hours of work, though.
但是制造一个换能器需要利用微机械技术，在一块质地脆硬的陶瓷材料上精心加工，耗费数个小时才能完成。
Wire electrochemical micromachining(WEMM) is a recent new method for micro-machining.
微细电化学线切割加工是最近出现的一种微细加工新方法。
Based on analyzing the data, the theories of scaling effect in micro-machining were validated primitively.
在对数据分析的基础上，初步验证了微切削中的尺度效应理论。
This paper introduces the computer simulation for the anisotropic etching used in micro-machining of sensors.
本文介绍传感器微机械加工中使用的各向异性腐蚀的计算机模拟。
Micro-excimer laser is a novel laser, and it will be used by industry on the ultraviolet-laser micro-machining.
微型准分子激光器是一种新型的激光器，它在工业紫外激光微加工上有广泛的应用前景。
With novel bulk micro-machining technique and novel surface modification method, a novel amperometric microelectrode sensor is presented.
应用新的体硅加工技术和新的电极表面修饰方法，提出了一种新型电流型微电极传感器。
The experimental results show that decreasing pulse duration and voltage can enhance the localization and improve electrochemical micro-machining accuracy.
结果表明，减小脉冲宽度，降低加工电压，可以提高微细电解加工的精度。
Meanwhile, a new electrochemical machining power supply is introduced in detail-a power supply for high frequency group pulse electrochemical machining used in the micro-machining.
另外，还详细介绍了一种新型电解加工电源：用于微小型零件加工的高频群脉冲电解加工电源。
Four promising laser assisted manufacturing approaches are introduced, including die-less laser forming, laser shock processing, laser micro-machining, and laser based direct metal deposition.
介绍了激光板与管无模成形、激光表面强化处理、激光微细加工和激光直接沉积成形等四种激光制造前沿研究技术。
Based on analyzing the characteristic of MWEDM (Micro wire electrical discharge machining), the key techniques are studied for meeting the needs of high precision and surface integrity.
在分析微细电火花线切割加工特点的基础上，对获得高精度、高表面质量工艺指标的关键技术进行了研究。
Scanning probe microscope (SPM) is used not only for measuring the micro profiles of surfaces, but also for nano ultraprecise machining and atom manipulation now.
扫描探针显微镜(SPM)现在不仅用于表面微观形貌的检测，同时也用于纳米超精密加工和原子操纵。
The results show that YAG laser micro machining of Al 2O 3 plates used for the manufacture of the gas sensor arrays is easily controllable, flexible, convenient and cheap.
研究表明激光微加工方法制作纳米气敏传感器阵列是一种可控性好、灵活、方便、廉价的制作方法。
The crystallographic effects on critical depth, micro cutting forces and surface waviness when machining single crystals are emphatically investigated.
重点研究了加工单晶材料时晶向对临界切深、微切削力和表面粗糙度的影响；
Results of the research and experiments in this paper are beneficial to deign and fabrication of micro pressure sensors. The micro machining technology can also be used for other MEMS products.
论文的相关研究和实验结果对于微压力传感器的设计、制作具有一定的参考价值，微加工工艺的相关研究结论也可以应用在其它微机电器件的制作上。
The forming mechanism of different micro structures fabricated by micro electrical discharge machining (EDM) deposition was studied.
对微细电火花沉积加工中沉积所得不同微细结构的成形机理进行了研究。
This paper is focused on developing micro electrochemical fabrication processes, including micro electroforming and micro electrochemical machining.
开展了微细电化学加工技术的试验研究工作，内容包括微细电铸和微细电解加工。
The micro abrasive jet machining (MAJM) technology was used to make micro channels on the glass.
采用微磨料气射流加工技术(MAJM)，对普通硅酸盐玻璃进行微流道槽加工。
The accurate analysis method of performances plays an important role in the optimization with multiple performance objectives of micro electrical discharge machining (EDM).
加工工艺参数准确合理的分析方法是优化组合电火花微细加工中多目标工艺参数的重要前提和保证。
The electrolytic products are hard to be removed from the small machining gap in micro ECM(electrochemical machining) process, which decrease the machining efficiency, stability and quality.
微细电解加工时，由于间隙微小，生成的电解产物因难以从加工区域中移除而降低了加工速度甚至中断加工。
It illustrates the micro machining process, and describes the experiment to investigate the performance of micropump.
对芯片的加工工艺流程进行了说明，同时对微泵进行了试验研究。
Precision machining, as a manufacturing technique of micro - optical components, has many advantages which are difficult or even impossible for other traditional methods.
超精密机械加工技术作为微光学元件的一种制造方法，具有很多其他传统方法所不具有的优点。
The newest trends of electrical discharge machining (EDM) including die-sinking EDM, micro EDM and wire EDM (WEDM) in Japan were presented.
综述了日本在放电加工领域的最新研究动态，包括成形放电加工、微细放电加工和线切割放电加工三部分内容。
A novel MOEMS spatial resonator based on micro-nano machining technology was put forward. The principle and structure of the resonator were introduced.
提出了一种新颖的基于微纳米加工技术的MOEMS空间谐振腔结构，介绍了其工作原理和系统构成。
The test shows that turning technology is a valid method for machining micro-shafts of duralumin alloy, but some few problems need furthering investigation.
试验结果表明，应用车削技术加工硬铝材料的微小型轴类零件是一种有效的办法，但还有一些问题值得研究。
The electrolytic products are hard to be removed from machining gap in micro-ECM (electrochemical machining) process, which may lower machining speed or stop the machining process.
微细电解加工时，由于间隙微小，生成的电解产物因难以从加工区域中移除而降低了加工速度甚至中断加工。
To probe into machining mechanism in micro cutting, the minimum cutting depth for achieving stable machining was discussed.
为探讨微切削的加工机理，对能稳定切削的最小切削深度进行了研究。
Micro-cutting technology is the key technology for the precision machining of microstructure which is usually made of non-silicon materials such as metal and alloy.
微细切削技术是面向金属与合金等非硅材料微小型结构件精密加工需求的关键技术。
Finally, the influence of cutting parameters and tool wear on burr formation are studied through the experiment of machining micro-flute.
最后，本文针对微槽切削加工过程，分析了切削参数和刀具磨损对工件毛刺形成的影响。
In order to use electro discharge machining (EDM) technology to manufacture micro-machines, analyzed the key technologies of micro EDM, and developed a micro EDM machine tool.
为了将电火花加工技术应用到微机械制造中，分析了微细电火花加工中的关键技术，开发了微细电火花加工机床。
The electrolytic products are hard to be removed from the small machining gap in micro ECM(electrochemical machining) process, which decrease the machining efficiency, stability and quality.
微细电解加工时，微小加工间隙内的电解产物难以移除，会降低加工效率、影响加工稳定性和质量。
应用推荐