With in-depth study, many different methods of analysis and calculation are raised gradually.
随着对问题研究的深入，各种不同的分析计算方法也相继被提出。
The methods of analysis and calculation for the prestressed space structure are also mentioned.
介绍预应力空间结构的分析计算方法(包括预应力态预应力计算方法、索的力学模型)。
The application of magnetic transmission technology in the agitating device is discussed, Some design methods and calculation formula are obtained by analysis and experiments.
对磁传动技术在搅拌装置上的应用做了较为全面的论述，并通过对具体结构的分析和试验，获得并验证了具体的设计方法和计算公式。
Finally, the feasibility and rationality of the proposed method was shown by the practical engineering calculation and comparative analysis with other methods.
最后，通过工程实例计算，并与其它分析方法进行对比分析，表明了该方法的可行性与合理性。
This paper introduces the present method of numerical analysis and design model for structure calculation in underground construction. Then, these calculative methods were evaluated.
本文介绍了目前地下工程结构设计采用的计算模型及相关的数值分析方法，并对各计算方法进行了评价。
In this paper, by the methods of theoretical analysis, testing and simulation calculation, the economic driving mode of light vehicles traveling downhill is studied.
本文通过理论分析、试验和模拟计算的方法，对轻型车辆下坡行驶工况下经济性驾驶模式进行了研究。
A vast amount of calculation and analysis indicates that the methods not only reduce the calculating time, but also have a high fitting accuracy.
大量的计算和分析表明，两个方法不但大大地减少了计算量，并且具有很高的拟合精度。
Through calculation, testing and analysis, the crack monitoring and diagnosis methods of rotors are proposed and project examples are given.
通过计算与试验分析，提出了转子裂纹的监测和诊断方法，并给出了工程实例。
An approximate formula of linear error about TS-B3 temperature sensors and calculation methods about circuit parameter were given by theory analysis.
通过理论分析，给出了TS -B3型温度传感器线性化误差的近似计算式及电路参数的计算方法。
The article discusses the application of "calculation Paper" engineering calculation language MATLAB in the signal analysis, and gives some analysis methods.
本文讨论了“演算纸”的工程计算语言MATLAB在信号分析中的应用，给出了分析方法。
To the linear convolution of short sequence, this paper sets up two simpler calculation methods based on the inherited method, and compares those two methods on example analysis.
针对短序列线性卷积计算问题，在其原有一般方法的基础上，建立了两种更为简便的计算方法，并且给出了算例分析比较了两种方法。
Briefly introduces the basic concept on engineering structure reliability and some practical calculation methods that are commonly used in the analysis of engineering structures.
简单介绍了工程结构可靠性的基本概念以及工程结构可靠性分析中常用的几种实用计算方法。
This paper gives an analysis of the three methods of incremental loss calculation for power systems and the relations between them.
本文分析了计算电力系统网损微增率的三种方法及它们之间的相互关系。
Methods: Based on the theories and calculation formulas of trend test analysis methods for one-way rank data, different analysis methods were discussed for the model data.
方法：根据单向等级数据趋势检验的各种方法的原理及其计算公式，结合实例对等级数据进行趋势检验。
The cooling methods are determined through the analysis and calculation of heat re - sources in Dongguashan Copper mine.
通过对冬瓜山铜矿的热源分析和计算，确立了冬瓜山铜矿的降温方法。
Analyzing methods based on material balance are currently important tools for performance analysis and reserve calculation of oil and gas reservoirs.
以物质平衡原理为基础的动态分析方法是现今油气藏动态分析与储量核实的重要工具。
Finally, the trim calculation and response analysis were carried out with the example helicopter's data. The simulation results validate the rationality and validity of modeling theories and methods.
最后采用算例直升机数据，根据提出的建模方法进行了定直飞行的配平计算和操纵响应分析，仿真结果证明了建模理论和方法的合理性和有效性。
By analysis and calculation for short circuit current of low voltage motor, kinds and protection methods of short circuit of the low voltage are explained.
通过对低压电动机短路电流分析和计算，说明低压电动机短路的种类和保护方法。
By calculation and analysis being relative to fuel economy in automobile engineering theory, some shortages of measurement methods of fuel consumption for light-duty vehicles in use are indicated.
针对我国现行轻型汽车燃料消耗量试验方法，运用汽车工程理论进行了有关计算分析，指出该方法存在的不足。
Based on the analysis of different calculation methods to heavy vehicle loads, this paper presents different determining methods of load in the design of slab, beam, column and foundation.
通过对确定大型车辆荷载的各种计算方法的分析比较，提出了在板、梁、柱及基础设计时大型车辆荷载的取值可分别采用的不同方法。
Therefore, to develop more efficient calculation methods to analysis the behavior of sand drained ground plays an important role both in the theoretical and the practical sides of such problems.
因此，探索更有效的砂井地基计算方法对于准确分析砂井地基的变形特性有着重大的理论及实践意义。
Models of reliability analysis were established and calculation methods of the models were discussed with consideration of load history for the evaluation of existing bridge structures.
针对既有桥梁结构的特点，建立了考虑荷载历史的可靠度分析模型，并讨论了其计算方法。
At present, there are various power losses analysis and calculation methods, but most of them fail to consider the effect of the uncertainty of power injection on buses.
目前，网损分析计算方法很多，但大多很难计及节点注入功率随机波动等不确定因素所造成的影响。
The self-stress detection methods of concrete-filled steel tube structures are summed up as direct detection method, analysis of calculation method and indirect detection method.
钢管混凝土结构自预应力的检测方法可归纳为直接测试法、计算分析法和间接测试法三种。
The characteristic impedance and attenuation characteristic calculation of the antenna tuner for wire antennas are derived in this paper. And some analysis methods are given.
本文导出线天线的天线调谐器的特性阻抗和衰减特性的计算，并对其进行了分析。
Several Methods of Calculation Break-Even Point are introduced in the paper, with detailed analysis, illustration and inquisition into Contribution Margin Method and coefficient Methed.
本文介绍了预测保本点的几种方法，着重对贡献毛益法、系数法进行详细的分析、说明、探讨，并对它们适用范围进行归纳汇总。
Among current methods analyzing grounding grids in power current, the nodal method of analysis is the easiest and least exponent number of matrix in calculation.
节点电压法是当前分析接地网最简单、计算中矩阵的阶数最小的方法之一。
The paper presents the methods of estimation of sludge specific activities, determination and calculation of fluid flow pattern in digester and analysis of material balance in fermentation.
讨论了污泥比活性测试、液体流态分布测定计算及物料平衡分析等研究厌氧工艺的方法。
In this article, different methods of approach to solve the flow within the turbo-machinery by means of the finite element analysis are introduced and a typical calculation given.
本文介绍用有限元法求解叶轮机械流动问题的各种不同的处理方法以及典型的算例。
Taken were four electrodes and six electrodes methods for example, the theoretical analysis and the calculation were proved to be correct by the simulative experiment of electrolytic tank.
以四电极、六电极法为例，用电解槽模拟试验证明了理论分析和计算的正确性。
应用推荐