Secondly, a method of pole assignment is put forward for designing switching surfaces of PI type.
其次提出了一种比例积分型切换超平面的极点配置设计方法。
Surface electroosmosis method can reduce coal tangential resistance but the pole distribution affects the result of reducing resistance.
表面电渗法可有效地减少煤的切向阻力，但电极分布对电渗效果有很大影响。
Surface electroosmosis method can reduce coal tangent ial resistance but the pole distribution affects the result of reducing resistance.
表面电渗法可有效地减少煤的切向阻力，但电极分布对电渗效果有很大影响。
From the engineering point of view, a design method for single input optimal regulator with preassigned closed-loop pole by inverse problem approach has been derived.
给出了从逆问题指定闭环极点设计最优调节器的方法，试图从工程角度解决单输入线性定常系统最优调节器的极点配置问题。
The element values of filters can be calculated by permutation method instead of the usual synthesis, i. e. successive complete and partial pole removals from the input impedances.
滤波器的元件值不是用一般的综合方法，即从输入阻抗中逐个移去全极点或部分极点，而是用极点交换法求得。
The paper detailed introduced the principle and computational method for anchor pole detection technique and expounded the reliability and practical effects of the method by cases.
本文详细介绍了锚杆检测技术的原理和计算方法，并通过实例阐述了该方法的可靠性及其实际效果。
By the practical pressure process of coke oven gas collection system as object, a new method of to design pole placement self-tuning regulator is introduced in the paper.
本文以实际的焦炉煤气集气系统压力过程为对象，介绍一神极点配置自校正调节器设计的新方法。
A new method is proposed of pole assignment for discrete-time systems with delays at plant input.
提出一种对于带有输入延迟的离散时间系统极点配置的新方法。
This paper analyses the necessity of the intellect control for welding battery pole flake, introduces the design method and key technology.
分析了电池极片焊机智能控制的必要性，介绍了该焊机的设计方法及关键技术的解决方案。
The reliability of this CAD method described in this article for all Pole Active Filter has been proved theoretically and experimentally.
本文提出的全极点有源滤波的CAD方法，从原理和实验上都证明了它的可靠性。
The welding method of Grinding Disk by the second pole rectifier welder is described in this article.
本文介绍了研磨盘的焊接方法和次极整流焊机的应用方法。
Linking method: Connect the electric needle instrument of plus or minus pole respectively on the needle handle, and exchange poles every time.
连接方法：将电针仪的正负极分别接在针柄上，每次将正负极交换连接。
Built up the sport mathematics equation of the elbow pole organization based on the loop method, and drew its displacement, velocity and acceleration exercise curve.
基于回路法建立了模切机双肘杆施压机构的运动数学方程，并绘出了双肘杆机构部分构件位移、速度、加速度的运动曲线。
Based on the thought of salient pole tracking, the paper studied the application of this method in sensorless control of PMSM in detail.
基于凸极跟踪的思想，详细讨论了高频电压信号注入法在永磁同步电动机无位置传感器运行控制中的应用。
The corrosion resistance of deposits and covering power of the plating bath were tested respectively by neutral salt spray test and inner-pole method, and the hardness of deposits was also measured.
采用中性盐雾试验测定了镀层的耐蚀性，采用内孔法测定了镀液的覆盖能力，并测定了镀层的硬度。
The manufacturing method of the polymer lithium ion battery comprises steps of pole piece preparation, polymer coating, nude cell assembling, cell soaking and the like.
聚合物锂离子电池的制造方法，包括极片制备、涂覆聚合物、装配成裸电芯和浸泡电芯等步骤。
In this paper, adopted analysis method, through demonstrate quality of node displacement, expounded analysis method of the geometric composite analysis of space splice chain pole system.
通过对结点位移性质的论证，提出了空间铰接链杆体系几何组成性质分析的解析方法。
This paper proposes a systematic method in the design of pole-changing windings based on reversing coil techniques and the concept "the minimum symmetric coil groups".
本论文提出了一种反向法变极绕组的系统设计方法和最小对称槽号组的概念。
This paper states application of "three - use pole" in practice engineering, and application range. And introduces its calculating method.
本文论述了“三用柱”在实际工程中的应用，以及应用范围，并详细介绍了它的计算方法。
At meanwhile, it can be seen that different state gain matrix can be gotten by applying different solution method for a certain question of pole-placement of state feedback.
对于一个确定的状态反馈极点配置问题，当采用不同的方法去求解时，可以得到不同的状态增益阵。
This method could neither determine the local terms nor improve the accuracy of the pole coordinate.
这方法既不能正确地求出地方项，也不能提高极坐标的精度。
This paper gives out a simple and practical method of designing electrohydraulic servo system by using PID plus output feedback to make arbitrary configuration of pole-zero in closed-loop system.
本文给出了一种利用PID加输出反馈来任意配置闭环系统极点和零点的简单实用的电液伺服系统设计方法，仿真设计实例表明了该方法的有效性。
This paper introduced working principle of PM Claw-pole stepping motors, including magnetic circuits analysis and torque calculation method.
本文介绍永磁爪极步进电机的工作原理、磁路分析及转矩计算方法。
Based on Euclidean algorithm, this paper gives a new method that can judge similar zero and pole points of a system model and conception of similarly.
本文基于欧几里德算法，给出了一种能判别系统模型中相似零极点的新方法和近似度的新概念。
This article introduces all kind of control method of pulse melting pole in gas protection welding, and divided them into two kind: parameter control and melt dripping transition accurate control.
全面系统地介绍了脉冲熔化极气体保护焊的各种控制方式，并明确地把它们分为两类：参数控制和熔滴过渡精确控制。
A substructure method and a dual reciprocity boundary element method (DRBEM) are applied to calculate four-pole parameters and transmission loss of ducts and silencers with complex flow.
将子结构法和双倒易边界元法联合应用于预测具有三维复杂流存在时管道和消声器的四极参数与传递损失，阐述其基本原理与数值过程。
In crosswind direction, the influence of vortex shedding for pole-type structures with different geometrical parameters is analyzed, the method for calculating crosswind response is presented.
同时考虑了不同风速下横风向旋涡脱落对于不同参数的杆式构件的影响，并给出横风向风振响应的计算方法。
The method of -pole assignment for multivariable systems by output feedback and its application to the design of integrated controller of large turbo-generator set are discussed in this paper.
本文讨论了如何利用输出反馈配置极点的方法设计大型汽轮发电机组综合控制系统的问题。
The efficiency of an automotive claw-pole alternator system was computed using a field-circuit method.
用场路结合方法计算一种新型汽车用爪极发电机系统效率。
In this paper, the effect of damper windings of salient-pole synchronous generator on transients of the recloser in power system is considered by numerical calculation method.
本文用数值计算方法研完了凸极同步发电机阻尼绕组对电力系统自动重合闸暂态过程的影响。
应用推荐