With this method, the user enters the test voltage, measurement time and the number of iterations.
使用这个方法，用户输入测试电压、测量时间和重复次数。
Determine success by measurement or other objective method such as the time taken.
以可计量的方式或其他的明确标准来衡量成功，比如时间的花费。
A new method to the measurement of displacement by using a time interval is presented, and a new type of sensor is made on the basis of these principles.
提出一种通过时间来测量位移的方法和原理，依此原理研制了新型的位移传感器。
This method was changed from measuring the dimension difference to the time difference measurement by using an optical system and circuitry.
这种方法利用一光学系统和电路，把线值差转换为时间差来测量。
Errors in digital measurement of the peak value and front time of impulses are calculated by this method, with influence factors and variance ranges analysed.
利用这种方法，计算了冲击电压峰值和波前时间的数字测量误差，并分析了误差的影响因素和变动范围。
In this paper, the principle of transit time correlation method and the constitution of measurement system are presented.
介绍了渡越时间相关测量方法的基本原理与测试系统组成。
This thesis adopted single scanning algorithm which is of constant. Because the measurement time is transient, this kind of method is very suitable for high speed measurement on line.
由于本论文采用的单趟的扫描算法是一个常量级的算法，使得检测时间短暂，所以这种方法非常适合在线的高速检测。
The method of delay chain interpolation is commonly applied in high accuracy time interval measurement, which has the advantages of simplicity and is easy for on chip implementation.
延迟线内插法是一种常用的时间间隔高精度测量方法，具有结构简单、便于片上实现的特点。
In order to increase the measuring accuracy the sample averaging method must be introduced, so that a certain time of measurement is needed.
为了提高测量精确度，减少随机误差，对噪声峰值测量应采用统计平均方法，所以也需要一定的测量时间。
A method based on optical scattering for in vivo real time measurement of parameters of hemorheology is suggested.
介绍了一种新的在体实时监测血流变参数的光学方法——光散射法。
This new method reduces the influence of time response of Fourier filtering on frequency measurement and improves the accuracy of transient frequency measurement.
新的算法有效地补偿了富氏滤波的时间响应对频率测量造成的影响，提高了算法的暂态测频精度。其程序和计算非常简单。
The relationship between the measurement time and THD measurement accuracy is discussed, and the method of reducing the measurement time of the platform are put forward, I.
介绍了陀螺稳定平台的测试方法，推导了测量次数和测量精度的关系，讨论了陀螺稳定平台快速测试技术。
When traditional method is used for measurement at low frequency range, measuring precision can not be guaranteed and measuring is time-consuming.
传统的频率特性测量方法，在低频时，测量精度较差，且非常费时。
The emphasis of the research of the method of time difference measurement is how to suppress noise and interference effectively.
有效地抑制噪声和干扰是研究各种时差测量方法的重点。
By this method the sensor drift can be detected accurately and the measurement error caused by sensor drift may be corrected at the same time.
该方法能够对传感器漂移故障做出判定，同时可实现测量误差的修正。
Compared with traditional methods, this method has the advantages of high accuracy, less measurement time and simple operation.
与传统测量方法相比较，提高了测量精度，缩短了测量时间，操作更加简例。
After estimation of the after-effect time using tracking measurement trajectory data, a method is proposed to analyze after-effect error.
本文提出了一种利用外测弹道数据特性判断后效段时间，进行后效误差分析的方法。
This paper describes a new method which USES IDFT (Inverse Discrete Fourier Transform) technique to do time domain near field measurement for antenna.
本文提出了一种利用离散付立叶反变换(IDFT)技术完成天线的时域近场测量的方法。
The experiment result with real measurement shows that the new method can be used in real time autonomous satellite orbit determination with high accuracy.
实测数据的计算结果表明，新的定轨方法可以实时自主地得出卫星轨道的位置，并能达到较高的定轨精度。
This method can be used in classification and in-time measurement of wood surface roughness after being improved.
进一步完善后该方法可用于木质材料表面粗糙度的分类和在线实时测量中。
In dynamic measurement field, when using digital speckle pattern interferometry, we always deal phase with time-average method and spatial carrier phase-shifting method.
在动态测试领域中，数字散斑干涉技术常用到的相位处理方法有时间平均法和空间载波相移法。
Time average interference measurement method is used in the experiment, and the vibration interference patterns of the object with different vibrating frequencies is obtained.
实验中采用时间平均干涉测量法，得到了不同振动频率下物体的干涉图形。
The method has advantages of higher stability, throughput and accuracy, larger field of view and better real time measurement.
这种方法具有稳定度高、实时性好、精确度高、大视场和高通量等优点。
This method, with superior measurement precision, is applicable to the measurement of time domain variable with discrete spectral lines.
这一方法的测量精度远优于其它方法，并可适用于一切具有分立谱线的时域变量的测量。
AD515A, the special electrometer operational amplifier, is introduced in this paper. And we proposed one high accuracy real-time measurement accumulation voltage method based on AD515A.
本文介绍了静电计专用集成运放ad515a的结构特点，并且提出了一种基于AD515A的高精度实时测量累计电压的方法。
At a time the acoustic measurement method of rock mass stresses and the horizontal tectonic stress are discussed.
同时，对用弹性波法确定岩体地应力及水平构造应力进行了探讨。
At a time, the acoustic measurement method of rock mass stresses and the horizontal tectonic stress are discussed.
同时，对用弹性波法确定岩体地应力及水平构造应力进行了探讨。
To estimate the parameter of velocity and acceleration with high accuracy and in real time for the measurement radar, an improved method based on spectrum zooming is proposed.
针对测量雷达要实时准确获得目标速度、加速度测量值的问题，提出了一种基于频谱细化的参数估计方法。
An S-wave arrival time detection method for wave velocity measurement in single-hole method is presented in this paper.
本文系统论述了单孔法剪切波速测量信号处理中的一种到时差识别方法。
An S-wave arrival time detection method for wave velocity measurement in single-hole method is presented in this paper.
本文系统论述了单孔法剪切波速测量信号处理中的一种到时差识别方法。
应用推荐