But this photoresist was then peeled off, leaving only a pure metal on metal bond.
但是这种光刻胶会被剥离,仅留下金属结合。
This method employs contact electrical discharge etching to remove wheel metal bond for wheel dressing.
它利用接触放电电蚀原理以达到去除砂轮的金属结合剂而修锐或整形砂轮。
The rationality of assignment of feature bands (including metal bond) and force constants has been discussed.
本文讨论了特征谱带(包括金属键)的归属和力常数的合理性。
The great difference of peeling behavior of rubber - to - metal bond in different vulcanized systems is also explained.
并利用不同流化体系的橡胶与金属的粘合体的剥离行为差异很大的结果进行了验证。
In order to realize dressing of fine diamond grinding wheel effectively, removal behavior of metal bond for dry and wet coolants is investigated.
为有效地实现微细金刚石砂轮的修锐,建立单脉冲电火花放电去除加工的试验系统,研究金属结合剂的气中和液中电火花放电去除机理。
Improving the service life and cutting efficiency of the segment of cutting border are the key problem of studying the metal bond diamond saw blades.
提高切边刀头寿命和切割效率是金属结合剂金刚石锯片研究的关键问题。
The authors suggest to control the sharpness and duration of the saw blade by alternating the metal bond matrix formula as well as the grit size and strength of the diamond.
提出通过改变配方中的金属粉比例及金刚石的粒度、强度来调节刀头的锋利性和耐用度。
Binder formulations according to the distinction between varieties can be divided into diamond grinding wheel: resin bond, vitrified bond, metal bond and electroplating molding.
按结合剂剂型区分,金刚石砂轮品种主要可分为:树脂结合剂、陶瓷结合剂、金属结合剂和电镀成型。
Both the metal bond coat and the ceramic coat display a laminar structure. The ceramic coat shows less density and there exists some cracks frequently, whereas the bond coat denser and no cracks.
金属粘结层与陶瓷涂层均呈层状结构,陶瓷涂层致密性较差、易出现微裂纹,金属粘结层相对致密、一般无裂纹。
It cannot be used to bond wood to metal.
这不能把木料粘贴在金属上。
Metal manufacturing technology is a process contains multiscale coupling phenomenon where fracture of atomic bond in the microscopic area will lead to the material removal in the macroscopic area.
金属切削工艺是一种隐含着微观和宏观之间耦合作用的过程,微观局部原子间化学键的断裂将会最终导致材料的宏观去除。
You need a strong adhesive to bond wood to metal.
需要强力胶才能把木料粘在金属上。
Ring closing metathesis (RCM) of dienes to cycloalkene provides an important tool for C-C double bond formation catalyzed by metal carbene.
关环转换反应是形成碳碳双键的重要反应之一,即双烯化合物在金属碳烯催化下关环得到环烯类化合物。
PAATEA gelator self-assembles into molecular gel by hydrogen bond, ionomer or metal coordination, which was proved by the FT-IR and theoretics analysis.
IR 及理论分析结果表明,该凝胶因子是通过氢键、离子聚集体或金属配位作用聚集、自我组装形成凝胶的。
The longitudinal cracks along bond line and the transverse cracks which cut across the weld metal cross section inside weld metal were formed, while X65 pipe line steel was welding.
X65管线钢在焊接过程中,内侧焊缝金属出现横向和纵向沿熔合线方向的裂纹,横向裂纹贯穿焊缝金属横截面。
Objective to investigate the influence of different porcelain surface treatment methods on the shear bond strength of metal brackets bonded to porcelain.
目的研究瓷表面不同处理方法对金属托槽与瓷修复体的粘接强度及去粘接后瓷面完整性的影响。
The heat-resistance and bond strength between PU and metal are improved by the primer.
此底胶具有耐热性能并改善了聚氨酯弹性体与金属之间的粘接性。
The defect testing and strength estimating of metal to metal single step-lap adhesive bond structures are studied by means of acoustic emission (AE) technique.
应用声发射检测技术研究金属铝单搭接胶接结构的缺陷检测和强度估计问题。
Through pullout tests for shear resistance of the adhesive steel bar in the metal tube, the bond principals and failure modes of adhesives are studied.
通过对钢筋与金属套筒之间采用植筋胶粘结的拉伸抗剪试验,探讨了植筋胶的粘结机理和拉伸抗剪破坏模式。
The textile fabric is characterized in that the metal cords are bond to this layer of non-metallic fibers by means of stitches.
这种织物的特征在于金属线借助缝迹结合到非金属纤维层。
The key to obtain a good bond is the ability of the filler metal to wet the YSZ.
的关键,取得了良好的债券的能力湿料的氧化锆。
Objective: The key of the success of porcelain-fused-to-metal restoration(PFM) is to obtain better bond strength between metal and porcelain.
目的:金瓷修复体成功的关键是金属与瓷之间要获得良好的结合强度。
Tightsen instant adhesives can fast bond most materials. Such as metal, rubber, plastic, glass, leather, wood, ceramic and so on.
泰盛瞬干胶系列产品适合快速粘接大多数材料,如金属、橡胶、塑料、玻璃、皮革、木材、陶瓷等。
The relation between the average number of metal-metalloid bond around one metalloid atom and the metalloid atom content in various distributions is established.
建立了各种分布情况下,每个类金属原子平均所占金属-类金属键数与类金属含量的关系图。
The adhesive forces were found to be related to the metal to oxygen chemical -bond energy.
已经发现,粘著力与金属-氧的化学结合能有关。
DING Hong, WU Jian-Yong. The vitro study of the influence of different silane coupling agents and adhesive materials on shear bond strength of metal brackets to porcelain surface [J].
丁宏,吴建勇。不同偶联剂和粘接剂对烤瓷瓷面与金属托槽抗剪切强度影响的体外研究[J]。
DING Hong, WU Jian-Yong. The vitro study of the influence of different silane coupling agents and adhesive materials on shear bond strength of metal brackets to porcelain surface [J].
丁宏,吴建勇。不同偶联剂和粘接剂对烤瓷瓷面与金属托槽抗剪切强度影响的体外研究[J]。
应用推荐