Gas metal arc welding (GMAW) is the main welding method in welding production.
熔化极气体保护焊(GMAW)是焊接生产中常用的焊接方法之一。
Gaseous helium is used as an inert shielding gas in metal arc and laser welding.
在金属电弧和激光焊接中气态氦用作惰性屏蔽气体。
Fracture toughness of both shielded metal arc welding and gas metal arc welding is almost the same.
焊条电弧焊焊缝的断裂韧性与气体保护焊焊缝的断裂韧性相当。
Shielded Metal Arc Welding, Submerged-arc Welding and CO2 Arc Welding are recommended for base layer welding.
基层的焊接，推荐采用手工电弧焊、埋弧焊以及二氧化碳气体保护焊。
This study established a comprehensive approach to monitor erythemal UVR magnitude from Shield Metal Arc Welding processing.
本研究建立一完整的评估方法，监测由遮蔽金属电弧焊接产生的红斑紫外线强度。
The behaviors of desulphidation during manual metal arc welding have been studied by means of experimental and theoretical analysis.
通过试验和理论分析，研究了手弧焊熔渣冶金脱硫行为。
Welding defects such as collapse of molten pool, burning through, would like to happen in the high efficient gas shielded metal arc welding.
应用高效的气体保护熔化极电弧焊焊接铝合金薄板时，容易出现熔池下塌、烧穿等焊接缺陷。
Based on the through the arc sensing method, a method is put forward to recognize the disturbance information of gas metal arc welding (GMAW).
基于电弧传感的检测方法，提出了一种识别GMAW焊接过程干扰信息的方法。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the…
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
The mixed gas metal arc welding process is used for the first time by DFEM in the discharge chamber of the hydraulic turbine exported to Syria's Tishrin.
东方电机股份有限公司首次采用混合气体熔化极气体保护焊焊接水轮机转轮室，并且在出口叙利亚的迪什林水轮机中应用。
Surfacing process test is made on Q235 steel substrate by shielded metal arc welding process using electrode CHR322 at different welding current condition.
前言：采用焊条电弧焊工艺方法，选用C HR322堆焊焊条在Q235钢基体上以不同的焊接电流进行了堆焊试验。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc …
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
The droplet transfer in the twin-wire co-pool gas-shielded metal arc welding(TCGMAW) process greatly affects the welding seam appearance and the welding quality.
双丝共熔池气体保护焊（TCGMAW）的熔滴过渡对焊缝成形以及焊接质量具有重要的影响。
Technological process of CO2 gas shielded metal arc welding with stainless flux cored wire used for stainless steel tank construction is presented in this paper.
介绍了采用不锈钢药芯焊丝CO2气体保护焊焊接不锈钢储罐的工艺过程。
Surfacing process is conducted on the substrate of steel A3 by shielded metal arc welding process using electrode CHR322 under different welding current conditions.
采用堆焊焊条CHR322，在A 3钢基体上以不同的焊接工艺进行手工电弧堆焊试验。
English Name:Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification;
简体中文标题：焊接材料。带和不带气体保护的合金钢以及细晶粒钢电弧焊用管状焊条。分类。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc air gouging.
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
This script of scientific and educational film (it has been filmed) describes briefly the commonly adopted manipulating techniques of one side welding by shelded metal arc.
本文用科教电影脚本（已拍摄成影片）形式，简明扼要地介绍了手工电弧焊单面焊接双面成形的几种常用手法；
Feasibility and reliability of metal arc spray molding have been verified through several engineering examples, and the results will be useful for the future in-depth research on die fabrication.
通过具体的工程实例，验证了本文提出的快速模具制造工艺方法的可行性和可靠性，为金属电弧喷涂模具的推广应用提供了可靠的技术支持。
All carbon arc gouged surface areas shall be ground to clean bright metal prior to subsequent welding.
开始后续焊接前，所有碳弧气刨面区域应接地至洁净明亮的金属。
Arc spray tooling process mainly includes: master pattern preparation, surface pretreatment, fabrication of the metal shell, frame fabrication.
关键制模工艺包括：母模制备、金属型壳制造、模框制作、背衬强化层制作、脱模以及后处理等。
There was no damage found inside, but there was a little of metal powder in the arc chamber and porcelain bushing and some of the powder has been burned.
阐述了返厂解体检查的情况，内部未发现损伤，但灭弧室和瓷套内有微量金属粉末，部分有灼痕。
English Name:Welding and allied processes - Recommendations for joint preparation - Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels.
简体中文标题：焊接和相关工艺。接缝制备的建议。钢的手动金属电弧焊、气体保护金属电弧焊、气焊、TIG焊接和束焊。
Investigating Arc-spraying Rapid Tooling by the Numbers, we find that performance of spraying metal shell and the backup material influences the employ life of Arc spraying die.
本文对电弧喷涂快速制模技术进行了系统的研究，发现喷涂金属壳和背衬材料的性能优劣直接影响到整个模具的使用寿命。
These light sources are the fluorescent lamp, halogen lamp. Short-arc xenon lamp and metal halide lamp.
这些光源为荧光灯，卤钨灯，短弧氙灯和金属卤化物灯等。
This welding process joints work pieces by melting the electrode and the base metal with the heat from the electric arc between the electrode and the work piece.
它是一种利用焊条与工件之间电弧产生的热量熔化焊条和母材而将被焊工件连接起来的焊接方法。
A high dense metal plasma can be produced by using cathodic vacuum arc discharge technique.
利用阴极真空弧放电技术能够产生高密度的金属等离子体。
Phase transition, enhanced diffusion and Y-Al alloy formation are studied using Y implantation with high current extracted from metal vapor vacuum arc (MEVVA) ion source.
利用金属蒸汽真空弧（MEVVA）源所产生的强束流离子注入铝研究了相变、增强扩散和钇铝合金的形成条件。
Phase transition, enhanced diffusion and Y-Al alloy formation are studied using Y implantation with high current extracted from metal vapor vacuum arc (MEVVA) ion source.
利用金属蒸汽真空弧（MEVVA）源所产生的强束流离子注入铝研究了相变、增强扩散和钇铝合金的形成条件。
应用推荐