To use object oriented programming method built knowledge storage and organon, put forward optimum calculative method for the mesh analysis.
采用面向对象的程序设计构造蜗杆传动的知识库和实施推理策略，提出了啮合分析的优化计算方法。
Deals with different disposing methods in the application of mesh analysis and node analysis while meeting series-connection resistors connected with current source.
阐述了在应用网孔电流法、结点电压法分析电路时，如遇到与电流源串联的电阻，处理的方式是不同的。
Mesh generating is a necessary procedure between geometric definition of part and its finite element analysis.
有限元网格生成是零件几何定义和有限元分析之间必不可少的步骤。
The category and reason for Finite Element Method analysis error are analyzed, and the adaptive mesh method is researched.
同时分析了有限元分析误差产生的种类及原因，并对自适应单元网格优化进行了研究。
The form finding analysis of planar mesh in the process, it is necessary to think about to film data width.
找形分析过程中的平面网格划分时，就要思考到膜资料的幅宽。
The Curved Surface Mesh Generation is one of important premise for the FEM analysis and computation.
曲面网格自动生成是有限元分析和计算的一个重要前提。
This paper describes the necessity of discussing network reliability, the connotation of network reliability and analysis evaluation of mesh network reliability.
文章阐述了网络可靠性的必要性，网络可靠性的内涵，并对网格网的可靠性进行了分析、评估。
The finite element analysis techniques and building model approach, including the mesh convergence study and the selection of deformation parameters etc.
探讨了管道三通塑性失效有限元分析中的建模技术，包括变形参量选取，网格收敛性研究等。
Aimed at the mesh model used for engineering analysis, a coloration algorithm based on the topologic graph is presented.
针对工程分析用的网格模型，以图论中的拓扑图为基础提出了一种空间网格面的染色算法。
Automatic mesh generation with optimization and bandwidth reduction by program will observably improve the efficiency and make the analysis result more reliable.
编制程序，实现了有限元网格的自动生成以及网格和带宽的优化，提高了分析的效率和可靠性。
The numerical examples demonstrate that this element has less sensitivity to mesh distortion and can be applied to numerical analysis of thin shell structures.
数值算例表明，推导的单元适用于薄壳结构的数值分析，并具有很好的对歪斜网格的适应性。
In ocean wave simulation, a view-dependent ocean wave mesh model is given by experiment analysis for two common mesh models, which are based on random sample points and based on fixed sample points.
在海浪模拟中，通过对两种常用网格化模型(基于随机采样点的网格化和基于固定采样点的网格化)的实验分析，给出了一种视点相关的海浪网格模型。
ANSYS is a general finite element analysis software. And mesh dividing is an important part of finite element analysis with ANSYS.
ANSYS是一个大型通用的有限元分析软件，网格划分是利用ANSYS进行有限元分析的一个重要环节。
A new method for the form-state analysis of cable net in mesh antenna reflector is proposed in the paper.
提出一种改进的方法进行金属网反射器索网形态分析，可以提高金属网反射器的制造调整效率。
Based on the structural analysis of the reflector antenna, a mesh model of the distorted reflector is obtained through the node displacement of elements of the distorted reflector.
该方法基于反射面天线的结构分析，利用变形反射面单元的节点位移信息得到变形后的反射面的网格模型。
Connecting with the features and use methods of GPS, and through precision analysis and mesh design, this paper introduces the application of GPS survey in the extension project of Taiyuan Airport.
结合GPS的特点及使用方法，通过精度分析、网形设计等，介绍了GPS测量在太原飞机场扩建工程中的应用。
Static, modal and harmonic analysis are used to analyze the vibrating mesh nebulizer in ANSYS.
采用ANSYS软件对振动网孔雾化器的模型进行了静力、模态和谐响应分析。
The feasibility and superiority of the steel mesh sand guard structure to prevent sand leakage for gravity quay walls was verified by way of the analysis and comparison.
通过分析和比较，验证了钢筋网用于重力式码头防漏砂结构的可行性和优越性。
Firstly, introduce mesh generation technology of the finite element analysis software-ANSYS and apply it to grid division of inner domain of the cylinder model and ship model.
首先，介绍了通用有限元分析软件ANSYS的网格生成技术并将其应用在圆柱模型和船体模型的内域网格的划分中。
In the analysis of fluid FEA, mapped mesh method is helpful to reduce the calculating error, avoid divergence and obtain more accurate results.
在流体有限元分析中，采用映射网格不仅有助于减少由于网格划分带来的计算误差，还能防止运算发散，有利于获得更精确的结果。
To verify the reliability of FEM results, the stress distribution of deformation is measured with mesh method, and the analysis results are compared with the experimental results.
用网格法测量了半球形冲头胀形时的应力分布，并将有限元计算结果与实验结果进行了对比，验证了有限元分析结果的可靠性。
This equation can describe the whole involute transverse tooth profile exactly. It also provides a new theoretical base for the analysis of gear mesh. Kinematics and dynamics.
该方程能准确、真实地描述整个渐开线齿轮端面齿廓，为齿轮啮合、运动学和动力学分析提供了新的理论依据。
With further development, the drawing part model designing, mesh generating, the stamping process analyzing and analysis results evaluating can be finished in this platform.
该集成系统的进一步完善，可完成模面设计，冲压工艺基本评估，单元划分，有限元求解的格式文件的生成，有限元分析和分析结果的调用。
The mesh theory of the technique has been analyzed. The equation of mesh, equation of gear flank of shaving and profiling are obtained and the analysis of example is presented.
运用啮合理论，建立了剃齿刀修形解析模型，推导出了修形时的啮合方程及修形后剃齿刀的齿面方程，并进行了实例分析和计算机运算。
Based on the analysis of user relationships in the virtual medical communities, the paper proposes a user similarity computing algorithm based on Medical Subject Headings (MeSH).
在对虚拟医疗社区用户关系进行分析的基础上，提出一种基于医学主题词表的用户相似度计算方法。
According to the design requirements of the mirror, the flexible supporting structure was designed, then the finite element analysis software was used to mesh and submit the operator.
为了满足反射镜较高的面形精度要求，提出了一种基于有限元分析的柔性支撑结构。
Based on the analysis of the strengthening mechanism, a method was proposed for calculating the shear strength of the beam-column connections strengthened with steel wire mesh and polymer mortar.
分析了相应的加固机理，并提出了高强钢绞线网-聚合物砂浆加固钢筋混凝土框架节点受剪承载力的计算方法，计算结果与试验结果符合良好。
The process of adaptive finite element analysis is just the process of continuous mesh optimization.
自适应有限元分析的过程就是网格不断优化改进的过程。
Firstly, a new mesh generation method for 3-d hydro-elastic analysis is proposed with the combination of 2-d Timoshenko beam theory and 3-d wetted surface mesh generation method.
首先，将二维梁振动理论与三维船体湿表面网格划分方法相结合，提出了一种适用于三维水弹性分析的浮体湿表面网格划分方法。
Firstly, a new mesh generation method for 3-d hydro-elastic analysis is proposed with the combination of 2-d Timoshenko beam theory and 3-d wetted surface mesh generation method.
首先，将二维梁振动理论与三维船体湿表面网格划分方法相结合，提出了一种适用于三维水弹性分析的浮体湿表面网格划分方法。
应用推荐