This melting process would take a thousand years or more.
这种融化进程本来需要一千年左右。
Computer control is of great importance in the melting process.
将微机应用于其熔炼过程控制具有非常重要意义。
The REE evidence shows that the magma formation was mainly controlled by partial melting process.
稀土元素反映岩浆形成主要受部分熔融作用控制。
Many groups of PTT have been investigated in order to find their contributions to the melting process.
研究了PTT分子链段中各基团对熔融过程的贡献。
Numerical simulation was adopted to investigate the influence of the melting process in vibration-induced extrusion.
采用数值模拟方法对振动诱导挤出熔融过程中振动参数的影响规律做了深入系统的研究。
The application of computer to the melting process, oxygen-enriched blast and desulphurization technique was briefed.
简述了计算机在熔炼工艺上的应用、富氧送风、铁液脱硫技术的情况。
The on-line analysis on morphology has been completed for immiscible polymer blends during mixing and melting process.
用光散射在线采集与分析方法完成了熔融混炼过程中非相容高分子共混物的形态结构分析。
The duplex melting process by Blast and Medium-Frequency Induction Furnaces for cast iron production has been studied.
对高炉-中频炉双联短流程熔炼生产铸铁件工艺进行了分析研究。
Our present problems on pitch-melting process were pointed out. A new quick-melting process for pitch was proposed here.
本文指出我国现有的沥青熔化工艺所存在的问题，提出了一种新的沥青快速熔化工艺。
The paper described the melting process, the mechanical properties of TEGOSTAR738 alloy and the centrifugal casting process.
以TEGOSTAR738锡基巴氏合金为例，阐述了对其熔炼过程及室温力学性能要求；
The effects of technical factors on melting process of ferrosilicon in liquid iron are studied by using numerical simulation.
用数值模拟方法研究了工艺因素对硅铁在铁液中熔化过程的影响。
The melting materials used in the pre-treating and other previous procedures of the cast iron melting process were classified.
对铸铁生产流程中的预处理及其它各前置工序中所用的熔炼材料作了归类。
The stabilizing agent made the melting process steady because it held back cross-linking and aging of PVA at high temperature.
稳定剂的添加，可明显改善PVA的熔融加工稳定性，使其交联老化程度降低，薄膜的溶解性能显著提高；
In this paper, driving power consumption of the solid conveying and melting process in conical twin-screw extruder was studied.
本文旨在对锥形双螺杆挤出机挤出过程中固体输送和熔融两段的物料输送功率进行研究。
The results show that: secondary melting process and cooling in copper mould can achieve homogeneous fine microscopic structure.
结果表明：采用二次熔炼铜模浇铸的铸锭方式可以获得均匀、细小的共晶组织；
The numerical model is set up on the basis of the action and mechanization generated by laser and material in laser melting process.
激光熔凝处理的数学模型是以激光与材料相互作用的过程及其此后发生的物理规律为基础建立的。
The pressure melting process of phase change material (the ice) around a horizontal elliptical cylinder with finite length is studied.
本文研究相变材料(冰)围绕水平椭圆柱，在有限长接触时的压力熔化过程。
The composition design, melting process theory and defect control on cast ingot of Aluminium standard sample were described in this paper.
阐述了铝块状光谱标样的成分设计、标样熔炼工艺理论及铝标样铸锭缺陷的控制。
The effects of deep refiner were investigated in this paper:it accelerates the melting process and economizes thermal energy in tank furnaces.
本文论述了玻璃池窑中深澄清池对加速玻璃熔化过程及节约能耗的作用，并指出了应用深澄清池应注意的问题。
By optimizing composition, foundry method, melting process and heat treatment process, the rate of qualified castings was increased up to 85%.
通过对成分、铸造工艺、熔炼工艺及热处理工艺的优化，使铸件的工艺出品率达到85%。
The production conditions, foundry method and melting process for mass production of nodular iron couplers used for large trucks were introduced.
介绍大批量生产大型拖车用球墨铸铁连接器的生产条件、铸造工艺、熔炼工艺。
Being able to process at high speed, computer makes it possible to calculate the proportion of charges in a melting process quickly and precisely.
使用计算机可以快速、准确地计算铸造熔炼过程中的炉料配比，但计算速度和精度与程序所用的计算方法有关。
Melting process must be adequately taken into accounted for the material dynamic response calculation in the intermediate energy deposition range.
在预估中等能量沉积产生材料的动态响应时必须适当地考虑熔化过程。
The colder surface water then rolls to the bottom where it absorbs heat from the earth and is returned to the surface to continue the melting process.
水面上较冷的水就会流动到底部，从地面吸收热量，然后再上升到水面继续融化处理。
Above-mentioned phenomena need to be explained by a new extrusion theory, which deals with the melting process in a smaller dimension of material size.
上述现象需要一项新理论予以解释，这一理论能够说明较小尺度物料的熔融过程。
In the third part depicts base glass manufacturing process, which includes glass formula design, glass melting process, and optical parameter measuring.
第三部分叙述了基础玻璃制作工艺，包括玻璃配方设计、熔炼工艺和性能测试。
In this paper, shock pressed HDPE samples was retrieved and investigated to reveal the effect of shock wave on its crystalline structure and melting process.
为了调查聚合物在冲击波作用下的结构变化，对HDPE受冲击样品进行回收，并分析了其晶体结构和熔融过程。
In this paper, shock pressed HDPE samples was retrieved and investigated to reveal the effect of shock wave on its crystalline structure and melting process.
为了调查聚合物在冲击波作用下的结构变化，对HDPE受冲击样品进行回收，并分析了其晶体结构和熔融过程。
应用推荐