Melt spinning tester, Pilot fiber plant, Filament trial equipment.
纺丝实验机，化纤试验设备，小型生产线。
Spinning box is an important part of the melt spinning machine for synthetic fibre.
纺丝箱体是合成纤维熔融纺丝机中的一个重要部件。
The spinning methods of Spandex are dry spinning , wet spinning , chemical reaction spinning and melt spinning .
氨纶的纺丝方法有干纺、湿纺、化学反应纺丝和熔融纺丝法，干纺产量占世界氨纶总产量的80%。
The results provide a basis for the application of high speed melt spinning to nano-antibacterial PET composites.
为采用高速熔融纺丝法应用纳米抗菌PET复合材料提供了实验数据与理论依据。
Microporous polypropylene hollow fiber membranes were prepared by the melt spinning and cold stretching (MSCS) method.
采用熔融挤出拉伸法制备了聚丙烯中空纤维膜。
The rheological property of polycarbosilane(PCS) spinning melt is studied with self-made single-orifice melt spinning system.
采用自制单孔熔融纺丝系统，对熔融纺丝状态时聚碳硅烷（PCS）的流变特性展开了研究。
By using the frequency converting speed regulating system the requirements of melt spinning on electric transmission were satisfied.
采用变频调速系统可以满足熔体纺丝对电气传动的要求。
The methods and developments of fabricating functional fibers containing nanoparticles by electrospinning and melt spinning were reviewed.
阐述了采用静电纺丝和熔体纺丝法制备含纳米粉体功能性纤维的方法及其研究现状。
We briefly describes the preparing and properties of the non - plasticate melt spinning PAN fibers as well as the resin that it made from.
综述了聚丙烯腈纤维的熔融纺丝工艺，主要介绍了非增塑融纺的聚丙烯腈树脂及纤维的制备方法和性质。
The influences of formation condition and draw ratio in melt spinning on the hollowness of Circular cross section hollow polyester fiber are studied.
本文就熔融纺丝成形条件及后拉伸倍数对圆中空聚酯纤维中空度的影响进行了探讨。
The structural characteristics of the polymer feedstock, polyurethane and polyether ester, practicable for elastic fiber melt spinning were described.
阐述了适于弹性纤维熔融纺丝的聚合物聚氨酯和聚醚酯的结构特点；
Hard elastic polypropylene fibre samples were made by melt spinning isotactic polypropylene with melt indexer, followed by fast winding and annealing.
将聚丙烯树脂在熔融指数仪上熔融挤出、快速牵伸并退火处理，制得了硬弹性聚丙烯纤维。
A kind of high strength and high modulus fiber was prepared by melt spinning and drawing of high molecular weight polyethylene (HMWPE) plasticized by wax.
采用石蜡增塑高相对分子质量PE后纺丝并经高倍拉伸制备高强高模纤维。
Polypropylene is the trade name of polypropylene fiber, which is by the polymerization of propylene as raw material by the melt spinning of fibers obtained.
丙纶是聚丙烯纤维的商品名称，它是由丙烯作原料经聚合、熔体纺丝制得的纤维。
Melt spinning involves melting the nylon in an inert atmosphere, controlling the extrusion and solidification of the melt, and collecting the extruded filaments.
熔纺包括尼龙在惰性气体中的熔化、控制熔融体挤出和固化、卷绕挤出的长丝等几个过程。
Microporous polypropylene hollow fibrous membranes may be prepared by the melt spinning and cold stretching (MSCS) or thermally induced phase separation (TIPS) method.
对熔融纺丝-冷却拉伸与热致相分离两种制备微孔聚丙烯中空纤维膜的意义、原理、过程、影响因素等进行了评述。
The quenching equipment, quenching technique of melt spinning and the progress on the research of computer simulation of melt spinning quenching process are introduced.
介绍了熔融纺丝的吹风冷却装置、吹风技术及熔纺冷却过程的计算机模拟研究的新进展。
PDLLA/HA composite fibers were produced by melt spinning, and the choices of the process parameters such as temperature, revolving speed and drawing speed etc were discussed.
选用熔融纺丝法制备PDLLA／HA复合纤维，探索了熔融纺丝过程中温度、挤出机转速、拉伸速率、加料速度和冷却速率等一系列工艺参数的选择及其影响因素。
A kind of high strength and high modulus fibre was prepared by means of plasticized melt spinning of high molecular weight polyethylene (HMWPE) with wax blend and high stretch ratio.
采用石蜡增塑高相对分子质量PE后纺丝并经高倍拉伸制备高强高模纤维。
Polyoxymethylene fibers were obtained by high-speed melt spinning with laser irradiation heating near the spinneret, meanwhile the thinning behavior was examined by on-line measurement.
聚甲醛纤维是由高速附近的喷丝头的激光照射加热熔融纺丝获得的，同时变薄的行为进行了检查，在线测量。
The spinning methods of Spandex are dry spinning, wet spinning, chemical reaction spinning and melt spinning. The output of dry spinning can reach 80%of Spandex total output in the world.
氨纶的纺丝方法有干纺、湿纺、化学反应纺丝和熔融纺丝法，干纺产量占世界氨纶总产量的80%。
Melt Spinning Processing Equipment (MSPE) was designed and manufactured in order to study the strengthening mechanisms of high strength Mg alloys produced by rapidly quenched solidification.
为了研究超高强度急冷快速凝固镁合金的强化机理，必须设计与制造急冷快速凝固单辊装置。论文设计并制造了单辊急冷快速凝固装置。
It USES nanotechnology to powder of bamboo charcoal particles, the melt spinning at the carrier made of polyester, has excellent deodorizing, thermal storage, humidity and other health functions.
它利用纳米科技将竹炭颗粒微粉化后，熔融于涤纶载体纺丝而成，具有优异的消臭、蓄热、调湿等保健功能。
Domestic spinning rotor technology need to be exploited both in the sense of melt treatment process itself and comparing with overseas advanced degassing equipments was pointed out in the end.
最后指出无论从铝合金熔体处理本身的需要，还是与国外的先进除气设备相比，国内的旋转喷吹净化技术都有待开拓。
A model on Melt - spinning dynamics of spandex is established, and its processing is studied by the way of analogue computation.
建立了弹性纤维熔融纺丝的动力学模型，并利用计算机模拟探讨了其纺丝动力学过程。
The factor affecting the production is analyzed. Melt pipe of spinning machine is also designed and machined. After the transformation, good effect is gained.
分析影响生产的不良因素，对纺丝机熔体管道进行设计及机械制造，改造后获得良好效果。
It described the spinning method including solution-spinning and melt-spinning and process of melt-spinning of polylactide and companies manufacturing polylactide fiber in the world.
介绍了聚乳酸纤维的纺丝方法、聚乳酸熔融纺丝工艺流程及目前国内外聚乳酸纤维的生产、开发情况。
The factors such as raw melt PET , process etc. on influence of the rate of even dyeing are analyzed in direct spinning process.
分析在熔体直接纺过程中，熔体原料、工艺流程等因素对成品丝匀染率的影响；
The factors such as raw melt PET , process etc. on influence of the rate of even dyeing are analyzed in direct spinning process.
分析在熔体直接纺过程中，熔体原料、工艺流程等因素对成品丝匀染率的影响；
应用推荐