A typical heat medium heating system and cold medium cooling system were given.
笔者以本厂的醇酸树脂生产为例，介绍了热媒加热循环系统和冷媒冷却系统。
Agitation can make the cooling medium cooling groove continuous cycle, so that the temperature is uniform.
搅拌可使冷却槽内的冷却介质不断循环，使温度均匀一致。
The electrode structure, metal wall action on the active medium cooling, and the gain distribution have been studied.
文章研究了电极结构，金属腔壁对工作气体的冷却作用和腔内的增益分布。
The thermodynamic model of laser medium was established to study the thermodynamic characteristic in laser medium cooling of heat capacity laser.
为了研究热容激光器冷却过程中激光介质的热力学特性，建立了激光介质热力学理论模型。
We have four levels of heating and four levels of cooling that include low, medium, high and very high.
我们有四级冷调及热调系统：低、中、高及超高。
After cooler work principle is that use of the cooling medium (such as water or air) and after cooler the exit of compressed air temperature difference.
后冷却器的工作原理在于利用了冷却介质(如水或空气)与后冷却器出口处压缩空气的温度差异。
Because of the fast cooling of flowing medium, the hydrogen cracking occurs easily under in-service welding.
在役焊接过程中，管内流动介质的快速冷却，易使接头出现氢致裂纹。
The condenser is a heat equipment, the evaporator absorbs heat with heat input power of compressor transformation with the transfer of the cooling medium ( such as water or air ).
冷凝器是放出热量的设备，将蒸发器中吸收的热量连同压缩机输入功率转化的热量一起传递给冷却介质（如水或空气）带走。
The fast cooling technology of steam turbine is the process that the cooling medium is used to accelerate the temperature reduction of cylinder and rotor after the shutdown of turbogenerator.
汽轮机快速冷却技术是在汽轮机组停运后，向汽轮机内部通以适量的较低温度的冷却介质，进行强迫对流换热，加快汽缸和转子温降速度的过程。
On the tank tody install Milo board or labyrinth type clamp cover, which can contain heating or cooling medium to heat or cool cyclically.
罐体上设有米洛板或迷宫式夹套，可通过加热或冷却介质来进行循环加热和冷却。
As the outer skin of a profile solidifies, it insulates the inner material from the cooling medium.
随着型材外层的固化，它会将内层材料与冷却介质隔绝开来。
And with the compressed air and the cooling medium to exchange heat.
并与压缩空气和冷却介质进行热量交换。
It will been discussed that the influence of increasing the pressure of cooling medium on the weight loss in the process of cooling and freezing of food.
本文探讨了在食品的冷却与冻结过程中，提高冷却介质的压力对食品干耗的影响。
In the evaporator, the liquid inside was for low pressure gas, and gasification draw was cooling medium heat produce refrigeration effect.
在蒸发器内，该液体被气化为低压气态，同时吸取被冷却介质的热量产生制冷效应。
Instead of aggressive cooling medium with no erosion medium.
用无侵蚀介质代替侵蚀性冷却介质。
During solidification of hollow ingot, its solidification and quality are seriously affected by the heat transfer boundary conditions between inner sleeve of core and cooling medium.
在空心钢锭凝固过程中，芯子内套筒与冷却介质之间的换热条件对空心钢锭的凝固过程及质量有着重要的影响。
The spinning conditions which influence the dyeing evenness of polyester DTY including spinning temperature, filter medium, air cooling and the chips quality are investigated.
本文研究了纺丝温度、组件过滤介质、冷却吹风管理以及切片质量等影响DTY染色均匀性的纺丝工艺条件。
In the past, air WAS the common cooling medium for components of most excitation systems.
过去，普遍采用空气作为励磁系统各部件的冷却介质。
Effects of different cooling medium on microstructure and mechanical properties of bainite wear resistant steel plate were investigated.
研究了不同冷却介质对贝氏体耐磨钢板组织和力学性能的影响。
The effects of different cooling medium on microstructure and mechanical properties of new type bainite cast steel were studied.
研究了不同冷却介质对新型贝氏体铸钢组织和力学性能的影响。
With CD40 lubricating oil as work medium, under the engine cooling system work conditions, 21 geometrical schemes of stainless steel offset strip fins were studied.
采用CD 40柴油机油为工作介质，在发动机冷却系统实际工况下，对21种几何尺寸的错列锯齿型不锈钢翅片进行了研究。
All these design and control offered the methods and successful paradigm to ameliorate controlled cooling system of medium and heavy plate production.
该设计及其控制对改进中厚板控制冷却系统提供了方法和成功的范例。
Along with the increase of decalescence of cooling medium, gas contents increases and degree of dry steam rises.
冷却介质主流发生相变的点称之为蒸发点，其后随着介质不断吸热，气态含量增多，蒸汽干度上升。
High pressure gas refrigerants in the condenser cooling medium heat to be setting for liquid, through the throttle device reduced pressure cooling into the evaporator;
高压气态制冷剂在冷凝器中向冷却介质放热被凝结为液态后，经节流装置减压降温进入蒸发器；
This paper recounts the application of the coal gas cooling water as the heating medium in detail, and compares coal gas cooling water with steam on economic benefit of heating.
介绍了煤气冷却水作为采暖介质的应用，比较了煤气冷却水采暖与蒸汽采暖的经济效益。
The aisle (120) is sealed such that essentially all of a cooling medium supplied to the aisle (120) passes through the racks (105).
所述过道(120)被密封成基本上所有供应到所述过道(120)的冷却介质穿过所述机架(105)。
Surface heat transfer coefficient is an important physical parameter which reflects energy transfer of interface and cooling capability of medium.
淬火过程中表面换热系数是反映界面能量传递和介质冷却能力的重要物理参数。
In one embodiment, a signal generated by the sensor is used to control at least one parameter of the cooling medium supplied to the aisle (120).
在一个实施例中，所述传感器生成的信号用于控制供应到所述过道(120)的所述冷却介质的至少一个参数。
The following technological properties of aqueous quenching medium series HQ are systematically studied: cooling ability, harden - ability, tendency of deformation and cracking.
本文系统地研究了HQ系列水溶性淬火剂的工艺性能、冷却能力、淬透性、淬硬性和变形开裂倾向。
The following technological properties of aqueous quenching medium series HQ are systematically studied: cooling ability, harden - ability, tendency of deformation and cracking.
本文系统地研究了HQ系列水溶性淬火剂的工艺性能、冷却能力、淬透性、淬硬性和变形开裂倾向。
应用推荐