The noise of capacitive micro accelerometer include mechanical thermal noise and electrical thermal noise;
电容式微加速度计的噪声包括机械热噪声和电热噪声；
Moreover, their photo-curing properties, dynamic mechanical thermal properties and mechanical properties were also investigated.
同时还研究了体系的光聚合动力学、机械热性能和力学性能等。
The effects of the environments on the dynamic mechanical properties of the pultruded CF/VE composite were studied by dynamic mechanical thermal analysis (DMTA).
通过动态机械热分析（DMTA）考察了环境条件对复合材料动态力学性能的影响。
Described are the main structure, technical parameters, tank design, testing and trial operation of the mechanical thermal car with special medium for railway transportation.
介绍了特种介质铁路机械保温运输罐车的主要结构、技术参数、罐体设计、试验及试运行情况。
Dynamic mechanical thermal analysis (DMTA) indicated that acetylated starch and glycerol were partially miscible with separated acetylated-starch-rich phase and glycerol-rich phase.
动态机械热分析(DMTA)显示热塑性乙酰化淀粉包含富甘油和富淀粉两相，乙酰化淀粉和甘油为部分互溶。
Dynamic mechanical thermal analysis showed that the addition of TPR improved the damping of the composite, but decreased the storage modulus and the glass transition temperature of the composite.
复合材料动态力学性能研究表明：TPR的加入提高了复合材料的阻尼性质，却降低了复合材料的存储模量和玻璃化转变温度；
It is not an unsolvable engineering problem. It is a small thermal mechanical effect in a prototype design that requires a simple engineering fix.
它不是一个解决不了的工程问题，而是原始设计中一个小的热力机械效应，需要做简单的工程修复。
By tracking this ratio over time, he can determine how long gas has taken to reach the surface and gain clues to the chemical, thermal, and mechanical state of the rocks the gas is passing through.
通过追踪该比率随时间的变化，他可以确定氡气到达地表需要花费多长时间，同时获得气体所通过的岩石的化学、热力学和机械状态。
Instead of using a mechanical compressor running on electricity, thermal coolers are powered with hot water.
这种冷却机不是用靠电运行的机械压缩机，而是用热水运行的。
Designed in tandem with our servers, the data center maximizes mechanical performance and thermal and electrical efficiency.
数据中心技术的设计与服务器设计同时进行，这个设计将机械性能，热和电效率极大化。
This process involves a compressor and with it associated thermal, mechanical and pumping losses, which affect fuel consumption.
这一过程涉及压缩机和与之相关的热，机械和抽水的损失，影响燃料的消耗。
During the working process, it bears thermal and mechanical loads simultaneously, because of which it tends to crack and even break.
它在工作过程中，受到热负荷和机械负荷的共同作用，工况恶劣，容易产生裂纹而导致破坏。
May be required to perform thermal, structural and mechanical integrity modeling and analysis to predict and optimize the system performance.
可能需要进行散热，结构和机械完整性建模与分析，以便预测和优化系统性能。
The main mechanical properties of the unidirectional composites are good in room temperature, thermal or wet—thermal conditions.
单向复合材料的力学性能、热强度保持率及湿热强度保持率都比较高。
NOTE: an energy source is any electrical, mechanical, hydraulic, pneumatic, gravitational, chemical, nuclear, thermal, or other energy source that could cause injury.
注意：任何电气、机械、水力、风力、重力、化学、原子能、热能或者其他能源都能导致伤害。
The physical mechanisms of ultrasound are thermal mechanism, mechanical mechanism and cavitation mechanism.
超声作用的物理机制有热机制、机械机制和空化机制。
Then, its indicator diagram, mechanical load and thermal load are analyzed.
同时对示功图、机械负荷和热负荷进行了分析。
The results show that, in graded coatings, parameters of thermal mechanical behavior and fabrication stress change with the compositions.
结果表明，在梯度涂层中，随着组成成分的变化，热机械性能参量与制备应力均相应变化。
The resin produced by the flame-retardant products with high strength and mechanical properties, thermal deformation temperature, curing speed, and good soak.
该树脂所生产制品具有很高的阻燃性能和机械强度，热变形温度高，固化速度快，浸透性好。
Finally, the as obtained hybrid material containing POSS-NH_2 was studied in respect to mechanical properties, thermal stability, hot-oxygen resistance, density and dimension stability.
最后，研究了含POSS - NH_2的环氧杂化材料的性能，包括力学性能、热稳定性、抗热氧化稳定性、密度、尺寸稳定性等。
The different compatibility between CE and CTBN caused by various acrylonitrile content in liquid carboxyl terminated rubber also affect the dynamic mechanical and thermal properties of the blends.
由CTBN中不同的丙烯腈含量所引起的CE与CTBN之间不同的相容性还影响了改性体系的动态力学性能和热性能。
This thesis introduces the moulding technique, mechanical and thermal properties of the rigid polyurethane foams used in cryogenic insulation.
本文介绍低温绝热用硬质聚氨酯泡沫塑料的力学、热学性质及其成型工艺。
To investigate the influence of mechanical boundary conditions on the thermal stress, a comparison of the results between displacement boundary and stress boundary is made.
同时研究了数值分析中温度荷载作用下应力边界条件和位移边界条件对温度应力的影响。
The results indicated, when compared to the pure epoxy resin, that the mechanical and thermal properties of the nanocomposite could be greatly improved by addition of low clay loading.
结果表明，少量蒙脱土的加入可以较大地提高材料的力学性能和耐热性能，对环氧树脂同时起到了增韧增强的作用。
But the densification of ceramic materials is vitally important to mechanical, thermal shock and fatigue properties.
但是，陶瓷材料的致密化对其力学、抗热震和热疲劳性能有至关重要的影响。
This paper aims at preparing biodegradable aliphatic block copolymers with combined mechanical and thermal properties with reduced cost.
本文旨在制备低成本且力学性能和热性能俱佳的可生物降解脂肪族嵌段共聚物。
Using finite element method, the thermal and mechanical deformations of herringbone spiral groove mechanical seal are analyzed.
用有限元法分析了人字形螺旋槽机械密封的热变形和力变形。
Using finite element method, the thermal and mechanical deformations of herringbone spiral groove mechanical seal are analyzed.
用有限元法分析了人字形螺旋槽机械密封的热变形和力变形。
应用推荐