This paper describes the mechanical mold of the carborundum about its operational condition, process. the im - proved process and its effect.
介绍了碳化硅制品机械成型的操作条件、方法及改进过程和达到的效果。
With the originally imported mold used for impact molding, the lock body has the following features: compact structure, good mechanical linkage, and smooth opening.
锁体采用原版进口模具冲压成型：结构紧凑、机械联动性好，开启畅顺。
Coordinate, trace and solve technical issues of plastic mold, punch mold and mechanical parts during manufacturing process.
协调跟踪和解决注塑件模具、冲压件模具及零件的制造过程的技术问题。
Moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.
以注塑模垫板的设计为例详细阐述，并与传统力学分析对比，为注塑模具的型腔设计提供了一种新方法。
This paper mainly performs the design and mechanical analysis and research on cold extrusion mold of the gear axis in cars.
本文主要对汽车用齿轮轴的冷挤压模具进行了设计和力学分析研究。
Our results show that mechanical properties of PP samples strongly depend on the melt temperature and mold temperature.
实验结果表明，熔体温度和模具温度对试样的力学性能有重要影响。
The static and dynamic mechanical properties have been studied for PP that have been injected at different melt temperature and mold temperature.
本文研究了在不同的熔体温度和模具温度下，注射成型的聚丙烯塑料试样的静态和动态力学性能；
The vibration injection molding and mold design method are discussed by the application of the mechanical vibration technology in the injection molding of plastics.
通过对机械振动技术在塑料注射成型中的应用，探讨振动注射成型工艺及其模具设计方法。
Mold experiment and numerical simulation methods are adopted analyze the mechanical properties evolution of rock mass under blasting shock load in this paper.
通过实验室模型试验以及对具体边坡工程的数值模拟相结合的方法分析了在爆炸冲击载荷作用下岩体力学特性的演化过程。
University degree in plastic mold, mechanical engineering or similar.
塑料模具或机械工程相关专业。
Using traveling magnetic field which produced by homemade linear motor to study the influence on 6063 and ZL102 aluminum alloy's mold-filling capacities, mechanical properties and microstructures.
采用自制的直线电机所产生的移动磁场，对6063与ZL 102铝合金充型能力、力学性能及显微组织的影响规律进行研究。
The optical system, mechanical system, electrical system and software system are studied in the mold laser etching machine, and the mold laser etching machine is developed with the practical value.
对模具激光蚀刻机的光学系统、机械系统、电气系统及软件系统进行了研究，研发出具有实用价值的模具激光蚀刻机。
This paper introduced the principle, application and maintenance ofthe mechanical steelyard change to electronic steelyard mold piece.
文章介绍了机械秤改电子秤模块原理、应用及日常维护。
Our company is mainly engaged in Mechanical design and processing, mold design and machining and metal stamping parts design and processing.
我公司主要从事模具设计与加工、机械设计与加工和五金冲压件的设计与加工。
Laser forming technology is a newer research technique, it can produce metalwork without any mechanical contact and mold.
激光成形技术是一种相对较新的技术，它没有任何机械接触就可以生产出金属制品，而不需要任何模具。
Constructed the mechanical model of 021 pistons casting mold and deducted the deformation.
构建了021活塞浇铸模力学模型，进行变形计算。
Influence of pressure applied on the mold after pouring on the surface status and mechanical properties of aluminum castings in lost foam casting is investigated.
试验研究了浇注后型腔压力对消失模铸造的铝件表面状态、力学性能影响的趋势。
10 years working experience in optical injection mold, have rich ptical injection mold and mechanical processing professional knowledge.
十年以上光学注塑模具工作经验；具备光学注塑模具与机械加工专业知识；
Bachelor degree or above, mold, major mechanical design or relevant.
学士或以上学历，模具，机械设计或相关专业。
Our results show that mechanical properties of PP samples strongly depend on the melt temperature and mold te...
实验结果表明，熔体温度和模具温度对试样的力学性能有重要影响。
Then mold the various mechanical process to conduct a comprehensive analysis and study.
然后模具的各种力学工艺进行全面分析研究。
The filtering plate mold has the advantages of easy and convenient installation and high mechanical strength;
本滤板模具具有安装简单且方便、机械强度高的优点；
The creep mechanical model of the solidified shell deformation in mold and the heat elastic mechanical model of the mold cupper tube deformation were built too.
本文还建立了结晶器内坯壳变形的蠕变力学模型和结晶器铜管变形的热弹性力学模型。
The effect of different water groove design of the copper plates on the temperature distribution of the mold and the solidifying shell has been studied through thermo-mechanical coupled analysis.
通过对两种不同板坯水槽设计形式进行热力耦合分析，研究了不同水槽设计对结晶器铜板及铸坯初凝坯壳温度分布影响。
In this paper two contents are studied: the data library of mold standard parts, dynamic simulation of the punching process and the mold's mechanical-electrolytic polishing.
本文进行了模具标准件数据库、冲压过程动态仿真和模具的机械电解复合抛光技术两方面内容的研究。
The mechanical property, thermal property and processability of wood plastic composite by injection mold are studied.
对注塑成型的木塑复合材料的力学性能、热学性能和加工性能进行研究。
Therefore, Kelvin mold should be selected to more realistic; a variety of aluminum alloys can be used to improve the mechanical properties.
因此，选用十四面体单元模型模拟结果更符合实际情况，选用铝的各种合金可提高泡沫铝的力学性能。
In this paper the effects of pouring temperature, mold temperature, inoculants, and section size on the microstructure and mechanical properties of casting nickel-base superalloy K24 were studied.
本文研究了浇铸温度、铸型温度、孕育剂和截面尺寸对K 24镍基铸造高温合金的组织和性能的影响。
Exhibitor categories include: machinery 46, fastener 94, bearings, springs class 25, class 18 mechanical and electrical equipment, mold class 9, and others 22.
参展商类别主要包括：机械类46家，紧固件类94家，轴承、弹簧类25家，机电设备类18家，模具类9家，其他类22家。
In the field of mold industry and mechanical applications our products are superior of good quality and service reputation.
在模具和机械应用领域，以产品的优良品质和服务著称。
应用推荐