• The two-body mechanical model of dam and foundation is presented in order to provide a new method for stability analysis of dam and foundation.

    建立了重力坝和坝基相互作用的两体力学模型,为大坝与坝基的整体稳定性研究与评判提供了一条新的途径。

    youdao

  • The purpose of this paper is to find the distribution laws of the shear force between vertical shaft and surface soil, and to lay a foundation for mechanical model of shaft in soil.

    揭示矿山立井井筒与周围表土之间剪切力的分布规律,为正确的立井井筒力学模型建立奠定理论基础。

    youdao

  • It is shown in engineering practice that the correct understanding and using of geological and mechanical model are the fundamental keys for the prevention of large-scale landslides.

    实践结果表明,查明边坡(滑坡)变形破坏的地质力学模式是滑坡地质灾害防治的基础所在。

    youdao

  • A nonlinear mechanical model of grape was constructed.

    建立了葡萄的非线性力学模型。

    youdao

  • Utilized general FEM software ANSYS to establish mechanical model and solve.

    并利用通用有限元软件ANSYS建立其力学模型并求解。

    youdao

  • Based on structural dynamic theory, the resonance mechanical model is established.

    根据结构动力学理论,建立了边坡共振的力学模型。

    youdao

  • Addition of mass m ACTS on the simple mechanical model of the muscle and muscular spindle.

    在肌肉和肌梭的简单机械模型中增加质量m的因素。

    youdao

  • Under the subway vibration mechanical model of the permanent deformation of loess research.

    地铁振动下黄土永久变形力学模型的研究。

    youdao

  • These results can be used as the basis of setting up mechanical model of PUR foam plastics.

    这些结果可以作为建立PUR泡沫塑料力学模型的基础。

    youdao

  • Three types of four-parameter strength criterion based on new mechanical model are proposed.

    在新的力学模型上建立了三种类型的四参数强度准则。

    youdao

  • This theory is completely abstract instead of being based on a more or less mechanical model.

    这个理论完全是抽象的,而不是建立在多少有点机械的模式上。

    youdao

  • This article analysed the loads of the drum brake and built the key brake's mechanical model.

    通过对鼓式制动器的受力分析,建立了其关键受力部件的力学模型。

    youdao

  • The simplified mechanical model is proposed with analysis of forces of abutments in this paper.

    通过基牙的受力分析,提出了基牙的简化力学模型。

    youdao

  • Using the equivalent mechanical model, this paper investigated multi-tank liquid sloshing problem.

    用等效力学模型法研究了多腔体充液晃动问题。

    youdao

  • The viscoelastic simple beam is taken as the mechanical model of flexible foundation with beam-wise.

    本文以均匀粘弹性简支梁作为梁形柔性基础的力学模型。

    youdao

  • Taking account of motor rotating speed fluctuations, a system equivalent mechanical model is established.

    考虑电动机转速的波动,建立了系统的等效驱动力学模型。

    youdao

  • The vibration mechanical model of gantry and bridge crane is established by means of structural analysis.

    通过对门桥式起重机的结构分析,建立了其振动力学模型。

    youdao

  • In this paper, some opinions in the mechanical model for saturated soils with isolated pores are discussed.

    对孔隙相互孤立饱和土体的弹性力学模型的部分观点进行了讨论。

    youdao

  • Based on the experimental curve, parameters are fitted for an established linear three elements mechanical model.

    根据实测曲线,对建立的线性三元件模型进行参数拟合。

    youdao

  • Casing, cement and formation plane strain mechanical model are established, considering casing with initial ovality.

    针对套管的不同初始椭圆度建立了套管、水泥环、地层平面应变力学模型。

    youdao

  • Analysis screw pump system, get the mechanical model of rod string, deduct and calculate undertaking load of rod string.

    通过对螺杆泵采油系统进行分析,得到抽油杆柱力学模型,并对杆柱所承受载荷进行推导计算。

    youdao

  • Based on the analysis on all kinds of load while the pump valve is working, we establish the corresponding mechanical model.

    对泵阀工作时的各种载荷进行了分析,建立了相应的力学模型。

    youdao

  • The mechanical model used to calculate this deviation angle of fault yields results which agree essentially with the observation.

    并提出一个力学模型,计算了断层扩展角,计算结果与观测事实比较吻合。

    youdao

  • As an example of large sized structural component, the mechanical model of load calibration test of an airplane wing was analysed.

    以飞机机翼等大型结构为例,探讨了大型结构部件载荷标定试验的力学模型。

    youdao

  • The contact zone between roller and workpiece and its contour's definition are the cruxes of establishing the FEM mechanical model.

    在建立筒形件强旋有限元力学模型过程中,旋轮与工件接触区及其边界的描述是重要的一环。

    youdao

  • The mechanical model of spherical node of coal pipelines of blast furnace is built. Its boundary conditions and loads are presented.

    建立了高炉炉顶煤气管道球形节点力学模型,提出了边界条件和载荷的处理方法。

    youdao

  • Based on the geological background and mechanism, mechanical model of buckling failure for the consequent slope is given in this paper.

    本文根据顺层边坡的地质背景及力学作用机制,抽象出了顺层边坡溃屈破坏的力学模型。

    youdao

  • A mechanical model for the offset-axes pendulum drill assembly (OAPDA) was established according to the continuous beam theory and the d.

    运用纵横弯曲连续梁理论和达朗伯原理,建立了偏轴钟摆钻具组合动力学分析模型。

    youdao

  • This paper sets up the mechanical model for the vibration of the statie shearerhaulage chains, and analyses its vibration characteristics.

    建立了采煤机牵引链振动的力学模型,并对其振动特性进行了分析。

    youdao

  • This paper sets up the mechanical model for the vibration of the statie shearerhaulage chains, and analyses its vibration characteristics.

    建立了采煤机牵引链振动的力学模型,并对其振动特性进行了分析。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定