The paper USES finite element method to calculate the whole reel structure of a ship lift and presents the mechanical model of finite element analysis for the structure as a whole.
采用有限单元法对升船机卷筒结构进行整体计算，提出了有限元分析的力学模型，对筒壳、幅板的强度及刚度作了全面分析。
The method of Virtual Prototype Building and Finite Element Analysis is theoretically meaning and practically valuable for design and performance simulation of complex mechanical system.
其中的虚拟样机建造方法与有限元分析手段在共同建立的联调平台下解决复杂机械系统设计及性能仿真方面具有理论意义与实用价值。
In the course of mechanical element processing, the phenomenon of ambiguous rejects is analyzed and studied, the method of differentiating was put forward.
对机械零件加工过程中出现的假废品现象进行了分析和研究，并提出了判别的方法。
In this paper, effects of material's mechanical character, microstructural anisotropy, on instantaneous temperature field is analyzed by means of the finite element method.
本文通过有限元方法计算，分析了材料力学性质细观各向异性对温度场的影响。
Mechanical evaluations of a widely adopted coating shear bond strength test standard were conducted via the finite element method.
本文采用有限单元法对一种普遍采用的涂层剪切结合强度测定标准进行了力学计算。
In this paper, a method of measuring the input mechanical impedance of the array element (longitudinal vibrating transducer) with square radiation head by using impulse sound tube is proposed.
本文提出了以声脉冲管测量辐射头为方形的一种阵元(纵向振动换能器)的输入力阻抗的方法。
Next, it summarizes the method of setting up flexible sugarcane, and analyses the finite element method of mechanical system containing flexible grider theoretically.
其次，研究了柔性化甘蔗的建立方法并选择适于研究甘蔗收割机的方法，并从理论上分析含柔性梁机械系统的有限段方法。
Based on principle of local action and the idea of cellular automata, a new mechanical method cellular element method is presented through inducting the discrete techniques of finite element method.
基于局部作用原理，借用有限元离散和插值技术，引入元胞自动机的演化思路，得到一种新的力学计算方法——元胞单元法。
Effects of residual stresses on the optical and mechanical performances of MEMS-based microgratings were investigated using finite element simulation method.
微型光栅结构薄膜中由于残余应力的存在引起器件在光学和机械性能方面发生显著变化。
Thus, this paper bring forward a young method to make up the lack of felt capacity-use mechanical joint element to link young and old concrete.
因此，本文研究的是加强新老混凝土结合，弥补粘结力不足的一种新方法，即采用机械连接件将新老混凝土结合在一起的方法。
The computer simulation procedure is the key to analyzing the mechanical behaviors of the continuous casting segment tower structure using threedimensional finite element analysis method.
应用三维弹性有限元方法对连铸机扇形段框架体进行分析计算的关键在于结构计算机模拟的可能性和可行性。
Teaching courses have advanced mechanical engineering, material mechanics, theoretical mechanics, finite element method, etc.
讲授课程：高等机械工程学、材料力学、理论力学、有限元方法等。
Mechanical properties of the stepping linear sophisticated piezoelectric actuator are analysed with finite element method and a number of experiments were carried out.
应用有限元分析方法对步进型精密直线驱动器进行了力学分析，并进行了大量的试验研究。
The methods of analyzing the strength of complex mechanical structure were studied through the application of the finite element method, and the methods of building model and gridding were discussed.
研究了用有限元法对复杂机械结构进行强度分析的方法和步骤，对复杂机械结构的建模方法和网格划分进行了探讨。
By simulating the features of two -, three -, four-high mill with finite element method, the geometric shape, micro-structure and mechanical property of wire section are analyzed.
分析了用有限元法模拟线材二辊、三辊和四辊轧机轧制的特点，对线材断面的几何形状、微观组织和机械性能进行了介绍。
The paper presents a new type CAM reductor, and also USES finite-element method to analyse the mechanical character of the new type CAM reductor.
提出一种新型凸轮减速器，用有限元方法分析了这种新型凸轮减速器的力学特性。
By using the elastoplastic finite element method, mechanical model for wear tension and internal pressure resistance of casing joints is set up.
采用弹塑性有限元方法，建立了套管接头磨损拉伸与抗内压的有限元力学模型。
The relative theory and methods on the analysis of the fatigue and fracture of mechanical components by means of the finite element method are discussed.
系统阐述利用有限元法对机械结构零部件进行疲劳断裂分析的相关理论和方法。
Using finite element method, this article presents a mathematical model and computer program for the mechanical calculation of overhead transmission lines.
本文提出了用有限元法进行架空线机械计算的数学模型和计算程序。
The finite element analysis method is used to check the mechanical characteristic of the mainly structures.
在设计中应用了有限元方法对结构的主要受力部件进行了力学分析。
Using finite element method, the thermal and mechanical deformations of herringbone spiral groove mechanical seal are analyzed.
用有限元法分析了人字形螺旋槽机械密封的热变形和力变形。
A computer model for the mechanical response of steel bridge deck surfacing under wheel loading is established by using the finite element method.
采用有限元方法建立在车载作用下钢桥面铺装层的力学响应计算模型。
The transverse elastoplastic mechanical properties of fiber bundle reinforced composites were studied by using the micro mechanical model and finite element method.
利用细观力学模型和有限元法研究纤维束复合材料的横向弹塑性力学性能。
According to practical working situation, nonlinear dynamic finite element method is adopted to establish a numerical model of combined breaking rock with high pressure water jet and mechanical bit.
采用非线性动态有限元法，结合实际工况条件，建立了高压水射流—机械齿联合破岩的数值模型。
Using a spatial composite finite element method, combining three-dimensional solid element and bar element, the mechanical analysis of a two-span curved PC continuous box girder bridge is conducted.
采用三维实体单元和杆单元相结合的空间组合有限元方法，对一座两跨曲线预应力混凝土箱形连续梁桥进行空间受力分析。
Technique of finite element method is the important base of theory and powerful tool in mechanical dynamic design.
有限元技术则是机械产品动态设计和动态分析的重要理论基础和强有力的工具。
Technique of finite element method is the important base of theory and powerful tool in mechanical dynamic design.
有限元技术则是机械产品动态设计和动态分析的重要理论基础和强有力的工具。
应用推荐