The switches are electronic switches with no mechanical contact.
其内部开关元件采用电子开关，无机械触点。
The paradigm is sort of a standard thought about efficient causation is a mechanical contact.
这个图表是关于因果关系的标准思想,内容都与机械学相关。
Laser forming technology is a newer research technique, it can produce metalwork without any mechanical contact and mold.
激光成形技术是一种相对较新的技术，它没有任何机械接触就可以生产出金属制品，而不需要任何模具。
Due to the flexibility of the role of mechanical contact, usually in the press and release button when there is a transient process of jitter.
由于机械触点的弹性作用，通常按键在按下和释放时都存在一个抖动的暂态过程。
Natural frequency and response vibration amplitude character of contact system will directly influence the reliability of EMR's mechanical contact.
其接触系统的固有频率与响应振幅特性直接影响电磁继电器的接触可靠性。
Magnetic bearing has no mechanical contact between the rotor and stator, and a rotary pump with magnetic bearing has therefore no mechanical wear and thrombosis.
旋转血泵磁浮轴承的定子和转子之间没有机械接触，所以其内部不会发生机械磨损或产生血栓。
The magnetic bearing is a novel type, high performance bearing, which suspend the rotor by magnetic force without any mechanical contact between rotor and stator.
磁悬浮轴承是一种利用磁场力将转子悬浮于空中，使转子与定子之间实现无机械接触的一种新型高性能轴承。
Now, engineers at Microsoft have developed a mechanical battery contact system that should ensure that, in the future, such scenarios never take place again.
现在，微软的工程人员开发了一个电池接触器系统机械装置可以确保以后这样的情形不会再发生。
"Solid State" pads replace the usual mechanical switch and contact used in other hard pads.
“实心”跳舞毯替换了一般用在硬式毯的机械开关和接触器。
This charge transfer is due to the mechanical release or closure of the contacts, the contact-to-coil capacitance, and the stray capacitance between signal and relay drive lines.
这种电荷转移是由于触点的机械释放或闭合、“触点-线圈”电容以及信号和继电器驱动线路之间的寄生电容引起的。
Breakdown of mechanical seal: Please contact manufacturer for solution.
机械密封故障：由生产厂家解决，请与厂商联系。
If must be connected electronic or mechanical device of other company, please contact with Shenzhen SUNWAY Medical Equipment co., Ltd. or authorized agents before connecting.
如果需连接其它公司的电子或机械装置，在连接之前请联系深圳市三维医疗设备有限公司或其授权代理商。
The rock abrastivity is in contact with the physical and mechanical indexes of rock and rock attributes.
岩石耐磨性与岩石的物理力学指标以及岩石本身性质有着密切的联系。
The contact zone between roller and workpiece and its contour's definition are the cruxes of establishing the FEM mechanical model.
在建立筒形件强旋有限元力学模型过程中，旋轮与工件接触区及其边界的描述是重要的一环。
Micro cantilever probe of atomic force microscope (AFM) is a typical micro mechanical component, which is under a coupling deformation during the contact scanning process.
原子力显微镜（AFM）的微探针系统是典型的微机械构件，它在接触扫描过程处于耦合变形状态。
Conventional methods for the elemental analysis of materials often require a contact to the specimen and a time-consuming mechanical sample preparation.
材料中元素的传统分析方法需要接触样品，并通常需要耗时的样品机械制备步骤。
Many properties of material were tested, such as mechanical property, surface water contact Angle, water absorption rate, infrared spectrum and ESCA analysis.
测试了材料的力学性能、表面接触角、吸水率，同时对材料进行了表面电子能谱(esca)分析。
This paper deals with the application of laser holography in the research on the contact state and the static and dynamic stiffness of mechanical joints.
本文介绍应用激光全息摄影研究机械结构结合面的接触情况及静动刚度的方法。
The induced normal curvature of two conjugate tooth surfaces along normal direction of contact line is one of the important indexes evaluating mechanical transmission performances.
两共轭齿面沿接触线法向的诱导法曲率是衡量机械传动性能的重要指标之一。
Non - contact, magnetic working style, there is no mechanical movement. therefore, users don t have to change the car fracture.
非接触感应式工作方式，自身无机械运动，无需改变电梯轿厢结构。
To study the influence of O-rings secondary seals, deformation behaviors of mechanical seal faces were analyzed under different pressures with the method of integral contact analysis by FEM.
采用整体接触有限单元法，考虑“O”型辅助密封圈的影响，计算了不同压力下机械密封端面变形行为。
The feasibility of measuring the mechanical property of material in the mid strain rate condition with the non contact photoelectric detecting technology is verified by experimental results.
试验结果验证了采用非接触式光电检测技术测量中应变率材料力学性能的可行性。
This dynamometer using permanent magnetic eddy load, without any contact, can avoid the velocity limit of mechanical bearing and coupling.
此测功机采用非接触式加载——永磁涡流加载，可以避免机械轴承和联轴器的速度极限的限制。
It is through radio signals to identify a specific target, read and write the corresponding data, without mechanical or optical contact with the identification system.
它通过无线电信号识别特定的目标，并读写相关的数据，而不需要识别系统与这个目标有机械或者是光学接触。
The traditional control cabinet of oil-pumping unit is using continuous electricity contact system through the mechanical touching point by closing and opening to achieve the circuit's "on" and"off".
传统的抽油机控制柜大都采用继电接触系统，通过机械式触点闭合、断开实现电路导通或断开。
The thermal mechanical analysis for the coupled problems of interaction between heat transfer and contact processes can be found in many engineering fields.
考虑传热接触耦合作用的热力学分析问题大量存在于工程中，分析的难点是必须考虑热与可移动接触边界间的耦合作用。
Both of them have trouble and insecurity, but also impairs the whole mechanical strength of trunk line, and results in large contact resistance of branch, weak reliability, easy heating and accident.
无论哪种方法既繁琐又不安全，且损坏原主干线整体机械强度，分线接点电阻大、可靠性差、易发热，很容易发生事故。
In the mean time, rolling contact stress, braking heat energy, thermal crack and mechanical action are key causes of tread spalling.
其中滚动接触剥离和制动剥离是两种主要剥离类型，滚动接触应力、制动热作用、热裂纹和机械作用是引起剥离的主要原因。
These results are related to the characteristics of seafloor surface sediments such as physical-mechanical features, grain contact state and sediment microstructure, etc.
这些结果与海底浅表层沉积物的物理力学性质、颗粒接触状态、颗粒的微结构等特征有关。
Subsequently use SIMPACK software package and CONTACT numerical procedure to analyse its dynamic performance and contact mechanical performance.
然后用SIMPACK软件及三维非赫兹滚动接触理论对其进行了动力学性能及接触力学性能的分析。
应用推荐