According to the theory of mechanical bonding, layer-to-layer bond strength was improved by making the surface become more roughness.
本文分析了光固化树脂层间结合机理，根据机械结合理论，增加表面粗糙度，增强层间结合强度。
Four fundamental manufacturing technologies namely bulk micromachining, surface micromachining, moulding and wefar bonding are introduced for Micro Electro Mechanical System(MEMS).
介绍了微电子机械系统的四种基本制作技术，即本体微机械加工、表面微机械加工、铸模工艺和晶片键合工艺。
According to the computation and discussion of the model parameters, a possibility of using the mechanical model to evaluate bonding degree of fibre web in nonwoven processing has been proposed.
根据模型的拟合参数计算和讨论提出了应用力学模型可以检验非织造布加工中纤维网粘结程度优劣的可能性。
The effect of silane and titanate coupling agents on the interface bonding state and the mechanical properties of GRPFN (Glass Fiber Reinforced PF Nylon)has been studied.
研究了几种硅烷偶联剂、酞酸酯偶联剂对玻纤增强PF尼龙界面粘结状态和力学性能的影响。
According to the computation and discussion of the model parameters, a way of using the mechanical model to evaluate bonding degree of fibre web in nonwoven processing has been testified.
根据模型的拟合参数计算和讨论证明了应用力学模型可以检验非织造布加工中纤维网粘结程度的优劣。
Reinforcement and concrete bear loads together by bonding on their interfaces, and interface stress is a discontinuous medium-related mechanical problem.
钢筋与混凝土主要通过界面黏结作用来共同承受荷载，在界面上的受力属于不连续介质的力学问题。
The results showed the interracial bonding was a decisive cause to influence the mechanical properties and fiber efficiency factors.
结果表明：界面粘结作用是影响力学性能和纤维效率系数的关键因素。
The effects of the way of bonding on the mechanical result of strengthening were also researched, since externally bonded CFRP is also resistant to corrosion in corrosive environments.
由于在高腐蚀环境下，表面粘贴CFRP还具有防腐作用，因此还研究了粘贴方式对加固力学效果的影响。
By adding proper crosslinking agent, chain extender and bonding agent, the mechanical properties of GAP based propellants can be tailored to a higher level.
引入适当的交联剂、扩链剂及键合剂可使GAP推进剂力学性能达到较高的水平。
The main problems met in the course of the development of the EF Bonding Agent and the main mechanical property, rheological properties and usage are also discussed.
讨论了这种EF型粘合剂研制过程中遇到的主要问题，并介绍了它们的主要力学性能、流变性能和使用方法。
The results show that primary action of bonding agent improving RDX/HTPB propellant mechanical property was bonding agent improving interface adhesive effect of RDX grain to HTPB binder.
结果表明，键合剂改善RDX／HTPB推进剂力学性能的主要原因在于它们改善了RDX颗粒与HTPB粘结剂基体间的界面粘结效能。
Series electric belt vulcanizer, mechanical conveyor belt is the vulcanization bonding of specialized equipment.
系列电热胶带硫化机，是输送机械胶带接头硫化胶接的专用设备。
The failure form of joint, mechanical analysis of joint, joint design and test methods of adhesive bonding of composites are presented briefly in this paper.
本文简略叙述复合材料胶接的接头破坏形式，接头力学分析，接头设计及测试方法。
The bonding between coating and substrate as well as inside the coating appears to be mechanical.
涂层与基体间及涂层内部主要是机械结合。
By adding proper crosslinking agent, chain extender and bonding agent, the mechanical properties of GAP based propellants can be tailored to a higher...
引入适当的交联剂、扩链剂及键合剂可使GAP推进剂力学性能达到较高的水平。
Transient liquid phase (TLP) bonding was applied to join TP304H stainless pipe, and the effect of bonding temperature on joint microstructure and mechanical properties was studied.
采用瞬时液相扩散焊(TLP)连接技术进行了TP 304 H不锈钢管的焊接，分析了不同焊接温度对接头组织、成分和力学性能的影响。
To separate the insulation, sheath and inner covering, and keep them from bonding and affecting the mechanical, physical and electrical properties of the cable.
隔离绝缘层和外护层以及内衬层，以防它们之间相互粘结而影响电缆的机械、物理、电性能等。
The result showed that the proliferation of carbide decided microstructure and mechanical property of T91 steel pipe joint with TIG bonding.
结果表明：碳化物的扩散决定了T91钢管TIG接头力学性能和显微组织。
Coating bioactive ceramics onto a tough biometals integrates the bone-bonding ability of bioactive ceramics and the mechanical properties of the biometals.
在金属表面涂覆生物活性涂层，可兼顾生物活性陶瓷的骨结合能力与金属材料良好的力学性能。
Effects of bonding agent BS, cross-linking agent JC, curing agent, binder molecular weight and functionality on mechanical properties of the propellants were studied.
研究了键合剂BS、交联剂JC、固化剂、粘合剂分子量和官能度等因素对推进剂力学性能的影响。
Vacuum bonding is one of the advanced technique of mechanical procedure.
真空扩散焊接技术是机械热加工中一种先进的工艺方法。
Micro adhesive bonding technology shows great potential in the assembly of micro-electro-mechanical system (MEMS) products.
微胶接技术非常适用于微机电系统产品的自动化装配过程。
To improve the mechanical properties of high modulus carbon fibers, the interface bonding abilities of cyanate ester, epoxy 5228 and epoxy 4211 with carbon fibers were studied.
为提高高模量碳纤维复合材料的力学性能，研究改性氰酸酯、5228、4211与碳纤维结合面结合性能。
The higher the bonding strength of resin with fiber, the better the mechanical capabilities of composites.
树脂与纤维结合面粘接强度大的，其复合材料的力学性能好。
The higher the bonding strength of resin with fiber, the better the mechanical capabilities of composites.
树脂与纤维结合面粘接强度大的，其复合材料的力学性能好。
应用推荐