This thesis does the calibration standard research on measurement technology of medical multi-parameter patient monitor, metrology calibration method, mainly on the side of measuring software system.
本文针对医用多参数监护仪的测量技术、计量检测校准方法，主要包括计量软件系统方面进行了校准规范方面的研究。
The complete scheme of measuring circuits and the system of hardware and software of the microcomputers are particularly introduced.
详细地介绍了测量电路、微机硬件和软件系统的实现方案。
In this paper, the design process of the CCD wood board auto-measuring system was stated in detail in aspect of the hardware and software.
本文从硬件和软件两方面详细地阐述了CCD木材几何尺寸自动检测系统的设计过程。
A method for measuring the dynamic frequency characteristics of a system with 8031 single chip microcomputer was presented, the circuit diagram was given and the software designing was introduced.
提出了用8031单片机及相应接口电路来完成系统动态频率特性测试的方法，给出了硬件的电路原理图，介绍了软件设计。
The article introduces the design target, principle project and software design of empty jar online measuring system.
介绍了一种用于啤酒瓶空瓶在线检测系统的设计目标、原理方案及软件设计。
A outstanding problem in control software of TV follows the measuring system at present is it is hard to reuse and extend the code.
现有的电视跟踪测量系统的主控软件的一个很突出的问题是代码的重用性和扩充性差。
The design of measuring system of dynamic contact resistance is achieved, including: hardware design and software design.
完成了导电环动态接触电阻测量系统的总体设计，包括硬件电路设计和软件设计。
This paper introduces the design and realization of double-channels blood volume measuring system, which mainly consists of hardware and software parts.
本文介绍了双通道血流容积测量系统的设计与实现。系统包括硬件与软件两个部分。
Software for controlling transport system and measuring stage positioning accuracy programmed by TP801 single board computer is presented in the paper.
文中主要介绍了利用单板机TP801编制的控制输片系统动作及测量工件台定位精度的软件。
The improved measuring points, used on-line instruments, implementation scheme of hardware, software platform and execution manner of control system are described.
说明了改造的测点、使用的在线仪表、硬件实现方案以及控制系统的软件平台和实现方法。
The hardware connection, software design and the communication examples of measuring data in the system are also presented in detail.
详述了其硬件连接及软件设计，并给出了系统中测量数据的通信实例。
This paper introduces the to tolerance design for the measuring and control software of the intelligent calorific value measuring system.
本文介绍智能热值测量系统中测控软件的容错设计，从而提高了系统的容错性。
The optimum algorithm of least-square method, the measuring principle, the system structure, the disposition of software, the test result and the analysis of error are also given.
本文阐述最小二乘法的优化算法、仪器的测量原理、系统组成和软件配置，并给出试验结果及误差分析。
This tester adopts programming by computer software, high magnification optical measuring system and photoelectric sensor etc such technique.
该机采用计算机软件编程，高倍率光学测量系统，光电传感等技术。
This paper presents an automated measuring system of moisture content for grain storage based on CAN, introduces the principle, hardware structure and software flow of the system.
本文提出了一种基于CAN总线的储粮水分自动测试系统，介绍了系统的工作原理、硬件结构和软件流程。
The expansion of SCORPIO-2104 software system and the establishment of a new realtime measuring system are described. A practical example in experimental reactor physics is also given.
本文主要叙述SCORPIO-2104系统的软件扩展和建立新的实时核测系统的方法，同时还介绍了在堆物理实验中的一个应用实例。
The design method of DC motor driving power and rotational speed measuring system is introduced in this paper, and the corresponding electronic circuit and software flow are also given.
介绍了一种直流电机驱动电源和转速测量系统设计方法，并给出了相应的电子电路和软件流程。
A measuring system for course heading signal based on 80c51 was introduced. The hardware and software of the system were presented.
介绍一种以80c51单片机为核心的航向信号测试系统，给出了系统的硬件组成、工作原理和软件流程图。
The principle of the solid material level measuring system with SRM is briefly introduced and the emphasis is placed on its hardware and software.
简单介绍应用开关型磁阻电机的固态物料料位探测系统的原理，重点介绍系统的硬件和软件。
The measuring principle and the software of a computer-aided three-dimensional geometry measuring system used on the assembly line of an EVECO auto-car are presented.
介绍了最近研制成功的依维柯汽车底盘横梁在线三维几何量微电脑测量系统的测量原理和测量软件。
The tubing thread measuring system based on linear array CCD is an advanced non-contact industry measuring system. It includes hardware and software.
基于线阵CCD的油管外螺纹参数检测系统是一种先进的非接触式工业检测系统，包括硬件和软件两部分。
The basic principle of measurement is presented. The optical system, hardware controlling system and measuring software are designed.
介绍了测量原理，设计完成了相应的光学测量系统、硬件控制系统和控制测量所需的软件。
The ECT system used to imaging the distribution of sintering ore and cokes in lump zone of a blast furnace is studied including the sensor design, measuring circuit design and system software design.
介绍了用于实现高炉块状区物料分布可视化监测的E CT系统，包括系统的硬件检测电路构成、传感器设计及软件设计。
The fundamental principle, hardware components and the method of software design of realtime system of data acquisition for computerised pipe measuring machine system were discussed.
论述了管形测量机的基本原理、硬件结构、实时数据采集系统的软件设计方法。
The initial configuration sub module configures the hardware of the imaging quality measuring system via software and transfers the parameters from the main control module to software configuration.
初始化配置子模块负责正确配置像质测量系统的硬件，并根据主控制模块传入的参数进行对应的软件设置。
Based on this method, the hardware and software of the liquid level measuring system based on 485-can bus are introduced in detail.
以此方法为基础，对基于485-CAN总线的液位测量系统的硬件和软件设计做了详细的介绍。
The functions of the software system include controlling the hardware, searching satellite and measuring the main parameters of the antenna.
软件系统包括：完成对硬件的软件控制，实现寻星定位子系统的寻星算法以及对天线主要测量参数的软件实现。
A computer software system for measuring fermenting degrees is developed, which can improve the precision of area measuring on fermenting degrees.
开发了一个用于测量发酵程度的计算机图像测量软件系统。
A computer software system for measuring fermenting degrees is developed, which can improve the precision of area measuring on fermenting degrees.
开发了一个用于测量发酵程度的计算机图像测量软件系统。
应用推荐