The permissible diameter variation (Vdmp, VDmp) is the tolerance for the maximum and minimum mean diameters of one measuring plane.
允许的尺寸变化量是考虑到了最大和最小平均直径公差的测量平面。
The article describes a new method of measuring semiconductor laser spectrum by plane scanning interferometer.
本文描述了用平面扫描干涉仪测量半导体激光光谱的一种新方法。
Use line and plane for measuring or locating.
普通线、普通面，一般用来测量、定位。
The direct calibration of the light plane in laser-scan measuring based on vision is discussed.
讨论了基于视觉的激光扫描测量中，光平面的直接标定方法。
This paper suggests a new method of rapid and automatic measuring the spectral diffraction efficiency curve of plane grating.
本文提出了一种快速自动测试平面光栅光谱衍射效率曲线的新方法。
The greatest lateral force effect in the plane perpendicular to the measuring axis is to be stated.
作用在与测量轴垂直的平面上的最大侧力作用是一定的。
The detector's target plane irradiance SNR of the point of burst measuring system, the target irradiance on the target plane and experiment data were explored.
对炸点测量系统探测器靶面上的辐照度信噪比、目标在探测器靶面上的辐照度以及实验数据进行分析。
A new method for measuring the spectral diffraction efficiency of plane grating with double-beam and single detector is suggested.
本文提出了一种双光束检测器测试平面光栅衍射效率的新方法。
A method for measuring the mono sound power in thermoacoustic resonator was developed by using the theory of plane wave decomposition.
提出了通过平面声波分解测量热声谐振管中单频压力波声功的方法。
Study of tests for measuring lateral strain localization of undisturbed clay in the condition of plane strain compression was rarely reported at home and abroad.
原状粘性土在平面应变条件下量测侧向局部变形的试验研究国内外鲜见报导。
In this paper, a new method of measuring liquid three dimensional flow velocity by rotaining the probe in the plane was submitted basing elaborate analyzing of hot film anemometer.
本文针对热膜流速仪元件的工作原理提出了在平面旋转测量液体三维流速的方法，并测量了大型精馏塔板液相单相三维流场。
This paper presents a kind of seepage measuring instrument applying to the plane roof with the large area.
针对建筑物屋面渗漏检测，研制了平面电容式屋面渗漏检测仪。
If the normal section in the center of the tooth line is taken as a tooth measuring and design section, when spline hob is designed in a plane meshing, the tooth profile error is minimum.
如果以齿纹中点法剖面作为齿形检测和设计剖面，用平面啮合法设计花键滚刀时，则齿形误差最小。
While the plane is measured by using the cylindricity measuring instrument and square, the data acquisition should be done at the same time.
首先利用圆柱度仪和角尺对被测件进行测量，同时采集原始测量数据，然后利用最小二乘法实现平面度误差的评定。
A method for calculating and measuring the coordinates of centering stakes using line control counts in plane control meshwork is introduced in highway construction in this paper.
介绍了利用线路平面控制网的控制点测设道路工程中组合曲线中线桩点位的坐标计算、测设方法。
A blasting measuring system which include plane wave producer was set up to measure the strain time curves of the rock bar under blasting loading.
以平面波发生器为加载源的爆炸测试系统，直接得出爆炸作用下岩石的应变历程曲线。
The half-shade Polarization prism is an important de- vice for determining and measuring accurately the azimuth of a beam of Plane Polarized light.
半阴偏振镜是精确确定和测量平面偏振光的偏振方位的重要器件。
This article presents an automatic measuring system of plane geometry parameters based on machine vision.
本文构建一种能够自动测量物体平面几何参数的系统，介绍了系统的硬件和软件组成。
A measuring system of the focus plane information of bigger aperture aerial camera was described.
提出了一种测量航空大孔径相机焦面信息的系统，论述了系统的测试原理和组成。
Currently available vernier depth gauges are simple in measuring function, especially in measuring precisely the no touchable directly depth of the measuring datum plane.
现有游标深度尺的功能单一，对测量基准面无法直接触碰的深度尺寸难以精确测量。
This article introduces a vehicles classification system which is a plane measuring system with parallel infrared rays in equal distance from one another and a classification subsystem.
本文介绍了一个车辆分类系统，它是由平行红外线族构成的平面检测子系统和分类子系统组成。
The homography takes an important part in plane measuring.
在平面测量问题中，单应矩阵扮演着十分重要的角色。
It is one of the effective methods for detecting position of slip plane, measuring thickness of slidebody, finding slip direction, calculating slipspeed and judging deep deformation case of slidebody.
是测定滑坡体滑动面（带）位置、滑体厚度、滑动方向、滑速及判断滑体深部变形状态行之有效的方法之一。
In this paper, the method of measuring the in-plane displacement field under an impact loading is proposed and is named dynamic digital speckle pattern interferometry.
利用数字散斑干涉法，研究了半无限平面模型在受冲击载荷下的面内位移场的测试技术。
The method improves the measuring precision of line error in the plane.
该方法可将平面内直线度的评定精度提高到一个新的水平。
A new technique for measuring the accurate position of the focal plane of an optical system with position sensitive detector (PSD) is presented.
本文介绍一种新的焦面检测方法，以位置敏感探测器P SD作为检焦器件对光学系统的实际焦面进行检测。
In order to verify the theoretical results, an experiment of measuring in-plane and out-of-plane displacements of an aluminous specimen is performed.
为了验证理论分析的结果，对一铝试件进行了离面位移和面内位移的试验测量。
The measuring system of laser plane is introduced, which is based on cylindrical lens, and use PSD and respective software and hardware to receive the signal.
介绍了一种可用于精密平面测量的新方法，以柱面透镜产生的激光平面作为基准平面，凭借激光平面的稳定性进行系统的精密测量。
The system deviated from the computer platform, its volume tends to miniaturization, therefore, it could be carried by plane and vehicle and fits remote measuring.
由于该系统脱离了计算机平台，整个系统的体积趋于小型化，能够机载、车载，适合于遥测。
The system deviated from the computer platform, its volume tends to miniaturization, therefore, it could be carried by plane and vehicle and fits remote measuring.
由于该系统脱离了计算机平台，整个系统的体积趋于小型化，能够机载、车载，适合于遥测。
应用推荐