This thesis describes the design of autofocusing implementation for CCD measuring microscope system.
本文对CCD尺寸参量通用检测系统中自动调焦的方法进行了深入的研究。
This paper presents a TV measuring microscope of Model BCM5-1T which consists mainly of an optical microscope, a TV camera system and a microprocessor.
本文介绍由光学显微镜、电视摄象系统和微处理机组合而成的BCM 5 - 1t型电视测量显微镜。
The industrial measuring microscope supports a wide range of application from industrial of optics, machines , electronics, precision measurement of geometric dimension.
可广泛适用于光学、机械、电子行业的几何尺寸精密测量。
Therefore, the image processing method instead of conventional measuring microscope testing method may reduce the labor, enhance efficiency of testing and analyzing, and avoid influencing traffic.
因此，采用图像处理方法代替常规测微镜检测方法，可大幅度降低人员劳动强度，提高检测和分析效率，并避免影响交通。
However, instead of heating the entire sample, the researchers used a hot atomic force microscope (AFM) tip to convert very narrow ribbons, measuring just 12 nm across, into reduced graphene.
然而，研究人员并非采用加热整个样本的方案，而是使用了原子力显微镜(afm)一个加热探针去转换出一条仅有12纳米宽的导电带。
Measuring results of two microscope objectives were also given.
并给出了对两个显微物镜测量的结果。
On the basis of experiment, this paper proposes how diaphragms are used correctly with tooling microscope line equipment to improve measuring precision.
本文以实验为基础，提出在工具显微镜类仪器中，为了提高测量精度，应如何正确使用光（门东）。
Based on this principle, a method is described in this paper of measuring OTF of an optical system by means of scanning photometric microscope eyepices.
基于这一原理，我们研究了一种使用扫描显微镜和微计算机测量光学传递函数的方法。
The theory of measuring surface roughness by using light-section microscope is described, and a simple method to measure the Angle of complicated small-scale tool is introduced.
阐述了光切显微镜测量表面粗糙度的原理以及如何利用该原理测量小尺寸复杂刀具角度的方法。
An auto measuring system of aerial camera lens is presented, which substitutes linear array CCD sensor for reading microscope to measure the focus of aerial camera lens.
提出了一种以线阵CCD固态传感器取代读数显微镜的航空相机镜头焦距测量系统。
The refractive index was obtained through measuring the focal position of a capillary filled with the liquid by a reading microscope, and doing a calculation with an analytic formula.
该方法基于共轴球面光学系统的成像原理，通过读数显微镜对吸入待测液体后毛细管的焦点位置进行单一参数的测量，进而计算出待测液体的折射率。
In this paper, the measuring method of animal fibers diameter based on auto-focus technology for optical microscope is studied.
毛绒纤维直径是评判此类纤维商业价值重要标准之一，本文主要研究基于光学显微镜自动聚焦的纤维直径测量技术。
A measuring system of film thickness based on atomic force microscope has been developed.
研制了一种基于原子力显微镜的薄膜厚度检测系统。
This paper introduces four methods for measuring the circular radius on the universal tool maker's microscope and its application, also provides the computative formulations.
本文介绍在万工显上测量圆弧半径的四种方法及其应用范围，并给出了计算公式。
Scanning probe microscope (SPM) is used not only for measuring the micro profiles of surfaces, but also for nano ultraprecise machining and atom manipulation now.
扫描探针显微镜(SPM)现在不仅用于表面微观形貌的检测，同时也用于纳米超精密加工和原子操纵。
Regarded as the traditional 2-d coordinate measuring system, omnipotence tool microscope has the most extensive application in the geometry measurement.
万能工具显微镜作为传统的二维坐标测量系统，在几何测量中具有最为广泛的应用。
This paper introduces the measuring principle, calculating formula and measuring method of the taps for taper pipe threads through the universal tool microscope.
本文介绍了锥管螺纹丝锥在万工显示上的测量原理、计算公式及测量方法。
And with a microscope and Universal three pneumatic measuring instrument, Switzerland imports Ruby comparator, Luo-hardness, and other advanced detection equipment.
并配有万能工具显微镜与三管气动测量仪、瑞士进口红宝石比较仪、洛式硬度计等先进检测设备。
This article, dealt with the application of measuring techniques such as RMC (resistance to microcracking) and fatigue testing apparatus of electron microscope to the iron and steel research work.
扼要介绍了微观显微裂口生成抗力r _ (MC)和电镜疲劳试验装置等测试技术在钢铁研究中应用情况。
After measuring virus titer, BMSCs were transfected and the fluorescence intensity was observed under fluorescence microscope.
重组病毒物理滴度测定后感染骨髓基质干细胞，在荧光显微镜下观察荧光强度。
The author puts forward a method which can measure the varying pitch errors by a universal tool microscope and estimate the measuring errors less than 15pm precisely.
本文作者探索在万能工具显微镜上用间接测量方法测量变螺距误差并进行精度估算。
This invention provides a locater for measuring the size and Angle of parts by use of metering length tool microscope and more particularly measuring locator for metering tool microscope length.
本发明提供了一种长度计量工具显微镜测量零件尺寸及角度的定位辅助工具，特别是一种长度计量工具显微镜测量定位器。
The use of Scanning Near field Acoustic Microscope (SNAM) in measuring the topography of precise surface is presented.
描述了一种用于检测超精表面形貌的扫描近场声显微镜（SNAM）。
The use of Scanning Near field Acoustic Microscope (SNAM) in measuring the topography of precise surface is presented.
描述了一种用于检测超精表面形貌的扫描近场声显微镜（SNAM）。
应用推荐