All the planets were too small to confirm by measuring their masses. Instead, they were validated using a computer program that determined they were statistically likely to be planets.
所有这些行星都太小,所以不能通过测量它们的质量进行确认。但科学家用一个决定它们在统计学上可能是行星的电脑程序进行了这项工作。
Products the whole measuring process is controlled by computer, the results measured directly with digital display viscosity value, not conversion.
产品整个测量过程用电脑控制,其测量结果直接用数字显示粘度值,不用换算。
The overall measuring process is controlled by an IBN-PC computer.
全部测量过程都由计算机控制,操作方便。
We emit and receive signals fromtransducers by using Measuring Ultrasound Equipment, and then put continent voltages to the A/D card in the computer.
通过超声波测试仪发射和接收换能器信号,输出的电压信号送入计算机的A/D卡。
This paper investigated the possibility of measuring the surface roughness of wood by the laser displacement sensor of the computer control.
介绍了一种采用计算机控制激光位移传感器在线检测木材机械加工表面粗糙度的新方法。
This tester adopts programming by computer software, high magnification optical measuring system and photoelectric sensor etc such technique.
该机采用计算机软件编程,高倍率光学测量系统,光电传感等技术。
It puts forward that measuring the three-dimensional geometric data of log surface shape, reappearing log shape and analyzing and managing shape parameters of log is all controlled by computer.
提出将原木表面形状的三维几何数据的检测、原木外形轮廓三维模拟再现以及原木形状参数分析与管理操作过程交由计算机控制完成。
In this paper a new method for measuring changes of peripheral vascular resistance by computer technique is introduced.
本文介绍应用计算机技术测量外周阻力变化的新方法。
Objective: To introduce the design of a computer program of measuring the parameters of recorded wave curve for the Computerized Physiological parameter Recorder designed by the Department of Physics.
目的:介绍为物理教研室研制的计算机多导生理参数记录仪设计的波形曲线测量程序。
Software for controlling transport system and measuring stage positioning accuracy programmed by TP801 single board computer is presented in the paper.
文中主要介绍了利用单板机TP801编制的控制输片系统动作及测量工件台定位精度的软件。
The concentration distribution of pulverized coal in blowpipe of blast furnace was measured in an isothermal two-phase model by means of a computer measuring system based on infrared transmission.
利用开发的红外透射法粉体浓度计算机测定系统,在高炉氧煤喷吹气-固两相流动模拟装置上测定了氧煤枪的煤粉浓度场。
The author introduces the design theory a nd realization method of measuring the coax-is degree of precise elements by computer vision. The key technology is also described detail.
介绍了利用计算机视觉技术对精密零件同轴度测量系统的设计思想和实现方法,并对关键技术进行了详细的论述。
The tension measured by a tension measuring roller is transmitted to a computer and is displayed.
由张力检测辊测得的纤维带张力送至计算机,计算机显示张力大小;
Recoil energy measuring system of a underwater launcher is formed by means of horizontal recoil device, electromagnetic velocity sensor, measuring amplifier, transient waveform recorder and computer.
利用卧式后坐装置、磁电式速度传感器、测量放大器、瞬态波形记录仪及计算机组建了一套水下发射装置后坐能量测试系统。
The Computer Aided Quality Inspection method of combining the coordinate measuring machine (CMM) and 2-d CAD geometry information extracted from DXF is illustrated by an example.
以一支座为实例介绍了一种利用三坐标测量仪与从二维工程图的DXF文件中提取的CAD几何信息相结合实现计算机辅助产品质量检测的方法。
The system deviated from the computer platform, its volume tends to miniaturization, therefore, it could be carried by plane and vehicle and fits remote measuring.
由于该系统脱离了计算机平台,整个系统的体积趋于小型化,能够机载、车载,适合于遥测。
Taking computer temperature measuring system with platinum RTD as an example, the author puts forward a method for obtaining system model parameters by using the least square.
以使用铂热电阻的计算机测温系统为例,给出了利用最小二乘法求取系统模型参数的方法。
A computer control system was composed by paper web tension measuring device and paper machine drive system.
利用纸幅张力测定仪与纸机传动系统组成计算机控制系统。
The system is comprised of intelligent capacitive sensors measuring unit and mainframe computer, connected by industrial bus.
系统由智能型电容式传感检测单元系统和计算机系统通过工业总线通讯联接构成。
The system solves the temperature measuring problem of multi-points in distributed location by using a central computer and a lot of distributed computers.
该测温系统利用分布的多台下位机,通过选择合适的测温传感器,并采用调制解调器进行数据传输,解决了温度测量中的多点和分布的问题。
When the width of plates is measured by the technology of computer image processing, the thickness of plates can cause the error in measuring width of plates.
在应用图像处理技术测量钢板宽度时,钢板的厚度变化会造成钢板宽度测量的误差。
With the aid of the computer-aided image processing system designed by authors, this paper gave the measuring method of the fiber diameter for wools.
用自行设计的计算机辅助图象处理系统,研究羊毛纤维细度的测定方法。
Making use of rotary encoder attains the purpose of measuring rotative Angle of wiper through single chip computer 8051 to count the pulse of rotary encoder generating, which is drove by wipers axle.
主要介绍了旋转编码器的工作原理,通过8051单片机来累计旋转编码器被刮水器转轴带动所产生的脉冲数,将其换算转化为角度,从而达到测量刮水器转角的目的。
In this paper, a measuring-gasket system by using 8031 single chip computer is described, and the working principle, hardware structure and software programing are given.
本文介绍了一种用8031单片微机控制的测片系统、它的工作原理、系统硬件结构及软件设计方法。
This system based on the industrial computer, using the PC virtual instrument designed by ourselves, forming the general radar directional pattern measuring instrument.
该系统以工控机为平台,应用自行研制的PC虚拟仪器卡,构成一个集成化的通用的雷达天线方向图测试仪器。
All the planets were too small to confirm by measuring their masses. Instead, they were validated using a computer program that determined they were statistically likely to be planets.
所有这些行星都太小,所以不能通过测量它们的质量进行确认。
The principle of hardware and software on turning error online measuring system controlled by 8098 single-chip micro-computer for principal axis of lathe was discussed.
阐述了8098单片机对车床主轴回转误差在线检测的原理、硬件设计及软件原理。
With the computer, the complex manual programming is replaced by computer interface and automatic generation measuring program, the complex computation becomes possib…
引入微机使得测量程序编写由原来复杂的手工编写转变为微机交互界面操作,并使复杂的综合误差补偿成为可能。
With the computer, the complex manual programming is replaced by computer interface and automatic generation measuring program, the complex computation becomes possib…
引入微机使得测量程序编写由原来复杂的手工编写转变为微机交互界面操作,并使复杂的综合误差补偿成为可能。
应用推荐