The two main problem of measurement-based load modeling is model structure based on measured load characteristics data and the model parameters identification.
总体测辨法负荷建模的两个主要问题是基于实测负荷特性数据的模型结构和模型参数的辨识。
The necessity of installing reactive power compensation in distribution substation of urban residential area is described and proved based on the measured load.
在负荷实测基础上，分析论述了住宅小区配电站设置无功补偿的必要性。
The analysis results of measured load curves show that the load model constructed by the proposed strategy possesses better description ability for dynamic characteristics of load.
对负荷实测曲线的分析表明，基于该策略建立的负荷模型对负荷动态特性具有较强的解释能力。
However the load is measured, there should be a common understanding of the final results and what they represent.
无论负载是如何被测量的，大家对最后的结果和它们表示的含义都应该有一个共同的理解。
Throughput is often measured in relation to load, determining where the boundaries of the system might be as user load continues to grow.
通常，吞吐量的测量是相对于负载情况的，确定随着用户负载的继续增长所出现的系统边界。
That may not sound like much - it's what a typical washing machine USES for a load - but it's almost twice as much as researchers had initially measured and more than they ever expected to find.
那可能听起来不是很多——典型的洗衣机的容量可。但是，它几乎是研究人员起初测量和预期发现的两倍。
Monitoring provides the ability to measure the response time of the application servlets, JSPs and EJBs against the backend resources, and against those measured by the load test clients.
监视提供的能力可测量针对后端资源的应用程序servlet、JSP和EJB 的响应时间，也可测量针对那些由负载测试客户机测量的东西的响应时间。
Servlet response time to help compare and contrast the response times observed on the application server against those measured on the load test clients.
servlet响应时间：有助于比较应用程序服务器上观察到的响应时间与负载测试客户机上测得的响应时间之间的异同。
This is one example of the convergence of performance measured in terms of the load, with availability measured by the reliable and timely delivery of messages.
这就是一个集中优化性能的例子，它通过负载度量性能，通过消息提交的可靠性和及时性来度量可用性。
The material is carried to load/unload tables, which enable job changeover times to be measured not in minutes but in seconds.
原材料被搬入装/卸载平台，这样不同生产任务的转换时间可以精确到秒，而不是精确到分。
Fuel load is measured by the amount of available fuel per unit area, usually tons per acre.
可燃物负荷是测量每块地区可得燃料的数量，通常是每英亩的吨数。
You can provide the service during specific times of day (see the access_times option) or only if demand for the machine measured by the load average is below a threshold.
可以只在一天中的特定时间段提供服务(access_times选项)，或者只在机器的负载(以平均负载为准)低于阈值时提供服务。
In this method, based on the measured strain values, the joint load is calculated by the fitted curve equation and compared with the total load applied during test.
该方法以测量的应变值为基础，由拟合的曲线方程计算接头载荷，并与试验时施加的总载荷对比。
The incretin effect was measured as the difference in insulin levels in response to oral and to an isoglycemic iv glucose load.
用肠促胰岛素的效应来检测口服葡萄糖和同等血糖静脉葡萄糖负荷后胰岛素水平的不同。
If the load resistor was connected directly across the voltmeter input terminals, the current through the relay contacts would cause a voltage drop and the measured cell voltage would be in error.
如果负载电阻被直接连接到伏特计的输入端子，通过继电器触点的电流会产生电压降，测得的电池电压将存在误差。
The effectiveness of the proposed method is verified by the measured dynamic response data of the load.
利用实测的负荷动态响应数据验证了该方法的有效性。
The axial clearance is one of the main parameters of the rolling bearing; measured clearance value is closely related to the measuring method and load.
轴向游隙是滚动轴承的关键指标参数之一，测量方法、测量载荷与测得的游隙值的大小密切相关。
The intramedullary pressure in trochanter major, femoral neck, center of head and load area of femoral head were measured respectively.
分股骨大粗隆、股骨颈、股骨头中心及股骨头负重区进行骨髓腔内压力测定。
Experiments are carried out to study the buckling response of cylindrical aluminum alloy shells under transverse load, with critical buckling loads measured and buckling configurations recorded.
设计实验，对铝合金圆柱壳在横向力学载荷作用下的屈曲响应开展研究，测量了壳体屈曲的临界载荷，记录了屈曲形态。
The environmental parameters are measured at mines mechanical work site with high temperature and humidity, the miners labour load is monitored and the obtained data is processed by computer .
对高温、高湿矿井机采面环境参数进行测定，同时对矿工的劳动负荷进行跟踪监测，并对测得的数据进行计算机处理。
MAIN OUTCOME MEASURES: the peak load and the power consumption were measured when the nerves ruptured and the nerve stress strain curve was described.
主要观察指标：测量神经断裂时的最大负荷、功耗，并描绘出神经应力—应变曲线。
According to the measured results, it discussed the affection of resisting force of mine, lifting load and the mass changing of steel-wire rope.
根据实测结果，讨论了矿井阻力、提升载荷及提升钢丝绳重量变化对实测的影响。
The practical thermal efficiency for different resistance loads is measured by using thermal efficiency apparatus. The method to determine the load for the optimum thermal efficiency is introduced.
利用热效率实验仪测量了不同负载电阻的热机实际效率，并确定了最佳热效率负载电阻的测量方法。
The affective value of vibration speed measured under non-load operation shall not exceed those specified in Table 5.
电动机在空载时测得的振动速度有效值不超过表5的规定。
The heat radiation in cylinder of a high speed light load compression ignition engine is measured using a heat radiation sensor.
在一台小型高速单缸压燃式发动机上，利用商用辐射传感器测量了缸内辐射传热量。
By the industrial experiment, the distribution of continuous casting billet preheating temperature is measured, and the economic load range of reheating furnace is established.
在工业生产条件下测量了铸坯加热温度分布，工业试验确定了加热炉经济负荷运行区。
The results show that: the model constants and the measured deflections under the changing load are very close to the model theoretical values.
结果表明：模型常数以及在变载作用下的实测挠度值和模型的理论值有较高的拟合度。
Field tests were carried out and the pressure rise, speed rise and the turbine gate opening were measured during load rejections. The Characteristics of safety membranes is analysed.
进行了现场甩负荷试验，实测了蜗壳压力、机组转速升高、导叶开度的变化过程，分析了爆破膜的工作特性。
The static foreaft stiffness of radial car tire was measured by a tire static load tester with additional tire foreaft stiffness testing device.
在加有轮胎纵向刚度测试附加装置的轮胎静负荷试验机上测试了轿车子午线轮胎的静态纵向刚度。
Through pressure metre under embankment, the magnitude of pile-soil stress ratio and its variation with the time are measured, and the variation of pile-soil load share ratio with time is analyzed.
通过在路堤下埋设钢弦式压力盒，获得了路堤下低强度砼桩、水泥搅拌桩以及土的应力比数值随时间的变化规律，并分析了三者荷载分担比随时间的变化特性。
应用推荐