This manostat can serve as a TTL circuit or MCU circuitry of power sources.
本稳压电源可作为TTL电路或单片机电路的电源。
The system includes the upper computer software, the MCU circuit, the driver and the step motor.
该控制系统包括上位机控制界面、单片机控制电路、驱动器以及步进电机。
At least 3 years design experience of power supply circuit, analog circuit, digital circuit, MOSFET circuit and MCU circuit.
3年以上电源产品，模拟数字电路设计经验，熟悉mcu,MOSFET等元器件。
Then the circuit and program of on-board motion control system are designed according to the needs, including chief MCU circuit and motor control circuit.
其次，根据设计要求，进行底层运动控制系统硬件电路和软件程序的设计，主要包括了主控制器电路和电机控制电路。
Low-power oriented design techniques include selecting low-power parts, low operation voltage, managing clock of MCU or making MCU turn into dormancy, managing power supply of circuit and so on.
低功耗设计的关键技术包括选用低功耗的各类器件，低工作电压，对MCU进行时钟管理或休眠，对各部分电路和器件进行电源管理等。
In addition, through the MCU control circuit communication with the outside world, we would achieve the Optical Modem distance management.
另外，通过MCU控制电路与外界的通讯，就可以实现光猫的远程管理。
In this paper we introduce the circuit of a 4 -bit LED Display by MCU AT89C2051, and discuss its interface and its application in detail.
本文介绍了利用AT 89 C 2051单片机组成廉价的4位LED显示器电路，并详细地介绍了其接口和应用。
This paper studied control system with the center of SPCE061A MCU, including the drive and soft-start circuit of two power supply, the key and distance control of the cleaner.
以SPCE061A单片机位核心，研制了高效、适用的控制系统，包括两个电源的驱动、软启动、净化器的按键及遥控等电路。
The theory, the circuit, and the program were introduced using LM567 as the component to detect the ultrasonic and using the MCU 89C51 as the main control component.
介绍了用集成锁相环路解码器LM567作为超声波检测元件，以89C51单片机作为主控元件的超声波液位测量的原理、电路及测控程序。
This paper introduces simulation methods of MCU hardware and software systems and help to solve actual problems by analyzing crystal circuit, electriferous reset and load capacity of the systems.
在单片机用户系统的设计中，必须对硬件和软件进行具体仿真。通过分析单片机系统的晶振电路、上电总清和负载能力来解决实际遇到的问题。
In this paper, we introduce a simple circuit module for voltage measuring and displaying, which main consists of MCU AT89C51, and discuss its interface and application in detail.
本文介绍了利用AT 89 C51单片机组成的一个简单测压显示模块电路，并详细介绍了其接口和应用。
This paper presents a clock control circuit in which an electronic clock is made by a MCU AT89C2051 16-bit timer and real-time control is achieved by the electronic clock's function of precise timing.
提出的时钟控制电路，是利用单片机at89c 2051的16位定时器做成电子时钟，并利用电子时钟的精确定时作用实现了实时控制。
This design's hardware consists of minimum system circuit in MCU AT89C52, AD convert circuit, LCD display circuit, the monitor and control circuit of current voltages.
控制器由AT89C52单片机，AD转换电路，LCD显示电路，电流电压采集电路以及控制电路等组成。
A novel linear CCD drive circuit based on embeded MCU is proposed, and liquid quality fraction detection system is elaborated, which is composed of CCD analog output signal acquisition.
介绍了线阵CCD传感特性和CCD驱动时序；设计了一种新颖的基于嵌入式单片机的线阵CCD驱动电路、CCD输出模拟信号采集为一体的溶液质量分数检测系统。
The micro-controller unit (MCU) is the core of the digital part, which still includes keyboard and sound-light notice circuit.
数字部分以微控制器为核心，还包括键盘和声光提示电路。
This design construct an sinusoidal signal generator based on DDS(Direct Digital Frequency Synthesis), completed by MCU AT89S52 and necessary analog circuit.
本设计采用AT89S52单片机，辅以必要的模拟电路，实现了一个基于直接数字频率合成技术（DDS）的正弦信号发生器。
The principle of PWM signals adjusting LED bright was analyzed, and the controlling circuit of MCU was designed.
分析了脉宽调制信号动态调节LED亮度的原理，设计了单片机控制电路；
The system consists of driving pulse generating circuit for CCD, instrumental amplifier with low noise, MCU controlling circuit and PC program for dealing with the data conveyed by MCU.
系统包括CCD驱动脉冲产生电路、低噪声测量放大电路、自适应比较电路、单片机控制电路以及上位机处理程序。
The working principles and characteristics of signal collection circuit, liquid-crystal display (LCD), programmable logic device and MCU controlling circuit of neutron monitor device are discussed.
论述了中子监测仪中的信号采集电路、液晶显示器的使用、可编程器件以及单片机控制电路的工作原理和特点。
Take MCU P89C669, this paper introduces the interface circuit.
本文以单片机p 89c669为例介绍接口电路的设计。
The two-arm bridge measuring low resistance circuit of MCU control, multivibrator measuring electric capacity, auxiliary leveling bridge circuit, output display circuit are designed.
设计了单片机控制双臂电桥测量低电阻电路、多谐振荡测量电容电路、辅助调平电桥电路、输出显示等电路。
The whole system is made up of three parts, the part of simulative waveform generation, MCU control circuit, function modules internal FPGA.
整个系统分为模拟波形产生、单片机控制电路、FPGA内部功能模块三大部分。
The digital electronic ignition device was composed of 5 sections of MCU control circuit, digital circuit, light emitting diode display circuit, detection circuit and launching circuit.
数字式电子发火机由单片机控制电路、数字电路、数码管显示电路以及检测与发射电路5部分组成。
Embedded system based on ARM is composed of MCU, memory, JTAG circuit and power supply.
基于ARM的嵌入式系统的核心部分包括处理器、存储器、JTAG电路和电源部分。
Intelligent measure and control device based on CAN bus is used in testing the temperature and humidity of position. MCU P80C592 with CAN controller is used as core circuit of hardware.
基于CAN总线的阵地环境温湿度智能测控装置，以片带CAN控制器的微控制器P 80c592为核心硬件电路。
The core of Slave interface hardware design regarded PHILIPS P89C668 MCU chip and SPC3 chip interface circuit as, and additional auxiliary interface circuit is formed.
从站接口硬件设计以PHILIPS P 89c 668MCU芯片和SPC3芯片接口电路为核心，外加辅助接口电路构成。
Details on the design of inverter circuit structure, the realization of driving circuit, the method for the generation of SPWM signal and the specific control of MCU was introduced.
详细介绍了逆变电路结构、驱动电路的具体设计、SPWM信号产生方法及单片机如何实现控制等。
The MCU replaces the operational amplifier circuit so as to strengthen the system of common-mode rejection, improve the problems of weak signal transmission.
更换了运算放大调理电路增强了系统的共模抑制能力，改善微弱信号传输中的问题；
The MCU replaces the operational amplifier circuit so as to strengthen the system of common-mode rejection, improve the problems of weak signal transmission.
更换了运算放大调理电路增强了系统的共模抑制能力，改善微弱信号传输中的问题；
应用推荐