The obtained aluminium matrix composite is uniform and dense in microstructure and stable in property.
所得铝基复合材料组织均匀致密、性能稳定。
This metal matrix composite is fairly recent development.
这种金属基复合材料是最近开发出来的。
LDPE CB matrix composite conductive materials are studied.
研制了低密度聚乙烯碳黑基的复合导电材料。
The metal matrix composite (MMC) is a new material with high properties.
金属陶瓷复合材料是一种新兴的高性能材料。
Cement matrix composite is fragile and possesses very low tensile strength.
水泥基复合材料均为抗拉性能低的脆性物质。
A new way that made grain reinforced aluminium matrix composite is introduced.
介绍了一种新的制备颗粒增强铝基复合材料的方法。
A finite element model for rubber matrix composite structures is developed in this paper.
建立了一个橡胶复合材料结构有限元分析模型。
This sensor is embedded in a resin matrix composite lath to detect the change of lath's curvature.
将此传感器埋入树脂基复合材料板内部，测量板的弯曲变形。
Fabrication technique of discontinuous carbon fibers reinforced ZA-12 alloy matrix composite was studied.
对不连续碳纤维增强ZA - 12合金基复合材料的挤压铸造工艺进行了研究。
In this paper, the research manufacturing technology and properties of metal matrix composite have been reviewed.
本文综述了金属基复合材料的研究现状，制造工艺和性能。
Studying on metal matrix composite is one of the important tasks in the modern field of new materials technology.
研究金属基复合新材料是当代新材料技术领域中的重要内容之一。
Metal matrix composite layers reinforced by in situ WC particles were formed by laser cladding using pre pasted 1.
采用激光熔覆搭接技术，在中碳钢基体上制备出原位析出的颗粒增强金属基复合材料表层。
The unidirectional short silicon carbide fibers reinforced-glass-ceramic matrix composite specimens were fabricated.
制备了单向短碳化硅纤维增强玻璃陶瓷的复合材料。
According to the press molding process of polymer matrix composite, a temperature field collection system has been developed.
针对复合材料模压成型过程的工艺特性，本文研制了一套温度场采集系统。
Gradient Aluminum matrix composite reinforced by ceramic fibers is an ideal reinforcement material for powerful engine pistons.
陶瓷梯度增强铝基复合材料是大功率发动机活塞理想增强材料。
Metal matrix composite layer reinforced in situ ZrC particles was formed by laser cladding overlapping on the medium carbon steel.
采用激光熔覆搭接技术，在中碳钢基体上制备出原位析出的颗粒增强金属基复合材料表层。
Throughout the experiments, there is no accelerated creep regime, which is in accordance with most of the ceramic matrix composite.
在实验过程当中没有观察到蠕变的加速阶段，这和大多数陶瓷基复合材料的高温蠕变现象是一致的。
With graphite and PF resin as raw materials, a new kind of graphite matrix composite is prepared by hot pressure molding formation.
以石墨与酚醛树脂粉料为原料通过低温热模压成形工艺制备新型石墨基复合材料。
A micromechanical method is used to study the elastoplastic behavior of metal-matrix composite reinforced by unidirectional fibers.
本文利用微观力学方法研究了单向连续纤维增强的金属基复合材料的弹塑性变形行为。
XU H J. Metal matrix composite and ceramic matrix composite reinforced by SiC fiber[J]. Aerospace Materials & Technology, 1994, (6):13-18.
[20] 徐海江。碳化硅纤维增强的金属基和陶瓷基复合材料[J]。宇航材料工艺，1994，（6）：13-18。
The forming process of a thermoplastic Controllable Crosslinking Poly(Aryl Ether Ketone)(CCPAEK) matrix composite was reported in this paper.
报道了一种可溶性可控交联聚芳醚酮（CCPAEK）热塑性复合材料的制备方法。
It is shown that the process of infiltration and solidification of metal-matrix composite is mainly controlled by pressure-regulating velocity.
实验表明，升压速度在很大程度上决定着材料的浸渗和凝固过程。
And it was also found the annealing treatment and the heat recycling treatment could improve the damping capacity of magnesium matrix composite.
镁基复合材料的阻尼性能与其状态关系密切，退火处理和热循环处理提高了复合材料的阻尼性能。
The unwettability between fiber and liquid-metal is one of the main obstacles in the liquid-infiltration of fiber reinforced metal matrix composite.
纤维与金属液的非润湿性是液相浸渗制造纤维增强金属基复合材料的主要障碍之一。
In this paper, TIG welding is used to join aluminum matrix composite and the influence of Ti filler on the comprehensive properties of weld is discussed.
采用TIG焊方法焊接铝基复合材料，讨论了填充材料钛对焊缝综合性能的影响及填充材料的厚度与焊缝中生成物之间的关系。
As a new composite material, carbon fiber-reinforced cement-matrix composite (CFRC) is gaining much attention in both the research community and engineering.
碳纤维水泥基复合材料作为一种新型的复合材料，越来越受到人们的重视。
In paper, the fabrication of carbon fiber-graphite-silver matrix composite and its application in radar electric brushes to transmit signals have been studied.
文章研究了碳纤维-石墨-银基复合材料的制造并应用于雷达电刷传输电讯号。
In a given anodic oxidation condition, a hard anodic oxidation film can be obtained on the surface of aluminum - matrix composite with an excellent anticorrosion.
在适当阳极氧化工艺条件下，颗粒增强铝基复合材料表面可以制得优良耐蚀性的硬质阳极氧化膜。
This paper introduces the performance, composition and classification, mainly introduced the mold process of resin matrix composite and the application in automobile.
本文介绍了树脂基复合材料的性能特点、组成和分类，重点介绍了树脂基复合材料的成型工艺及其在汽车上的应用。
The preparation of SiC particulate reinforced al matrix composite is studied. The influence of technological parameter on the composite mechanical property is analysed.
研究了碳化硅颗粒增强铝基复合材料的制备，并对影响复合材料性能的一些工艺参数进行了摸索和探讨。
应用推荐