Then we repeat modifying its LC parameters through MATLAB simulation, compared with the design demand and the filter's responding characteristic to obtain the best filtering capability.
然后利用MATLAB进行仿真调试，对比设计要求和滤波器响应特性，反复调整滤波器lc参数，以获得最好的滤波性能。
ATP simulation and MATLAB calculation show that the voltage ratio protection against inter-turn fault of reactor can make correct judgement to this kind of fault quickly.
基于ATP的仿真和Matlab的运算表明基于电容器电感器电压比的电抗器匝间短路保护，能够对匝间故障做出快速而正确的判断。
At last, making use of the plotting function of MATLAB, the paper carries out simulation analysis from three aspects: auto-correlation function, spectrum and fuzzy function.
最后，利用Matlab软件的作图功能，从自相关函数、频谱函数和模糊函数三个方面对M波形的性能进行了仿真分析。
According to BLDC mathematical model and the movement principle, a simulation model of BLDCM control system by the SIMULINK and PSB block of software MATLAB is built in this paper.
根据无刷直流电机的数学模型和运行原理，通过MATLAB软件的SIMULINK和PS B模块，搭建了电机及整个控制系统的仿真模型。
In the study of modern control theories, pole assignment and LQR are designed on inverted pendulum systems, and the MATLAB simulation is researched.
利用息现代控制理论，针对倒立摆系统研究了极点配置方法和线性二次型最优控制方法，并利用MATLAB进行了仿真研究。
SIMULINK emulation module of Nonlinear Integrator and the nonlinear compensation emulation of its control system have been achieved adopting MATLAB language.
采用MATLAB语言，构造了非线性积分器的SIMULINK仿真模块，并作了控制系统非线性校正的仿真。
This paper simulates the transient process of a single machine infinite bus system in MATLAB and introduces the basic function of PSS as well as its influence on power system.
采用MATLAB分析工具对单机无穷大系统暂态过程进行仿真，介绍了PSS的基本功能，并分析了PSS对于系统暂态稳定性的影响。
Based on this, Fuzzy PID Controller applied to jigger discharging system is designed with simulation by MATLAB, analysis in detail to the control effect is processed.
在此基础上设计了适用于跳汰机排料系统的模糊pid控制器，利用MATLAB进行仿真，对控制效果进行了详细的分析。
It takes MATLAB as testing platform, after simulating on the leaves and structure in IFS and LS respectively, it realizes the simulation in hybrid algorithm.
以MATLAB作为仿真平台，在分别实现LS和IFS算法模拟树的结构和叶片的基础上，实现了混合算法的模拟。
MATLAB is a powerful tool for analyzing and stimulating the linear system and has very strong ability for calculating and visualizing data.
Matlab是一种功能极强的线性系统分析和仿真工具，其数值的计算能力和数据的可视化能力极强。
Based on this, Fuzzy PID Controller applied to single room jigger servo system is designed with simulation by MATLAB, analysis in detail to the control effect is processed.
在此基础上设计了适用于单室跳汰伺服系统的模糊P功控制器，利用MATLAB进行仿真，并对控制效果进行了详细的分析。
This paper introduces the design that finite impulse response filter is simulated by MATLAB to simplify the complicated computation in simulation and to improve the performance of filter.
本文着重介绍采用MATLAB软件对有限冲激响应滤波器进行仿真设计，从而简化了设计中繁杂的计算，并提高了滤波器的滤波性能。
The MATLAB simulation results show that the scheme provides the control system the stronger robustness and better control quality, and improves its dynamic and static performance index.
仿真研究表明，这种方案使汽包水位控制系统具有较强的鲁棒性及良好的控制品质，提高了系统的动静态性能指标。
It put forward an effective new method to resolve the inverse position by using the conversion of coordinates and projection in analytic geometry, the method was simulated and verified by MATLAB.
运用解析几何中的坐标变换和投影，得出一种有效求解位置反解的新方法，通过MATLAB软件对该方法进行了仿真和验证。
A designing method of fuzzy PID controller is given, then an example of how to design and simulate the system by using the software MATLAB is introduced.
讨论了模糊pid控制器的设计方法，同时利用MATLAB软件中的模糊控制工具箱进行了系统的辅助设计与仿真实验。
This paper simply describes characteristic of MATLAB language, then especially introduces the emulation of oscilloscope and spectrum analyzer applying MATLAB language.
本文简单叙述了MATLAB语言的特点，并介绍了如何用MATLAB语言编写程序，实现示波器和频谱仪的仿真。
This paper studies methods of communication system simulation and constructing model with MATLAB software , and gives the several simulation examples and the results.
研究了利用MATLAB进行通信系统仿真及其建模的方法，给出了几个典型仿真范例及仿真结果。
As the result of simulating finished with MATLAB, clear prior knowledge and anticipated result of calibrating dynamic error coefficients of accelerometer on three-axis turntable are obtained.
利用MATLAB进行了仿真，使得在三轴转台上标定加速度计动态误差系数有了清晰的先验认识和结果预期。
The paper applies the fuzzy control system toolbox based on MATLAB (SIMULINK) language, through the application of the electrical generator output voltage fuzzy control, supplies a simulation method.
运用了基于MATLAB (SIMULINK)语言的模糊控制系统工具箱，通过对发电机输出电压模糊控制的实现提供一种仿真方法。
Based on switch function model of TCSC and MATLAB, the digital simulation method in researching zero-crossing point characteristic of the capacitor voltage is put forward.
该文基于TCSC的开关函数模型并借助MATLAB仿真工具，提出了研究电容电压过零点特性的数字仿真方法。
Controller was designed in MATLAB fuzzy logic toolbox, and fuzzy controller and taxiing model were used in SIMULINK condition, and the whole simulation model was set up.
在MATLAB模糊逻辑工具箱中对控制器进行设计，并将模糊控制器与滑跑模型应用于SIMULINK仿真环境，建立整体仿真模型。
Simulation is carried out to a signal with random noise through the application of MATLAB, which verifies the practicability and the superiority of the theory.
应用MATLAB针对一伴有随机噪声的信号进行了仿真实验，证明了该理论的可行性与优越性。
Because the calculation method is accomplished by MATLAB Tool, it is in favor of realizing design and simulation of high-frequency chain switch power supply circuit.
由于该计算方法是在MATLAB环境下进行，有利于进一步实现高频链开关电源电路的设计和仿真。
Then under the MATLAB environment, author has done system simulation experiments by altering given value, changing controlled object characteristic and adding random disturbance.
在MATLAB环境下分别进行设定值改变、对象特性改变和加随机扰动三个环节的系统仿真实验。
This test realized emulational system of OFDM through MATLAB programming, adopted error control coding of concatenation of convolutional codes and interlaced codes.
本文通过MATLAB编程实现正交频分复用（OFDM）的系统仿真，系统采用卷积码和交织码级连的差错控制编码。
This test realized emulational system of OFDM through MATLAB programming, adopted error control coding of concatenation of convolutional codes and interlaced codes.
本文通过MATLAB编程实现正交频分复用（OFDM）的系统仿真，系统采用卷积码和交织码级连的差错控制编码。
应用推荐