This USES complex and expensive machinery to build up atomic layers of material on a substrate.
这项工艺要求利用功能复杂价格又昂贵的器械在承印底板上建立材料的原子层。
Small, spatially addressable arrays of biological material (on an inert substrate) that can be tested for specific functional criteria.
可用来作为特殊的功能标准进行测试的生物材料，在小空间有址可寻的排列在惰性材料上。
Each cell has five layers of solid material that has been deposited onto a paper substrate.
每个电池有五层放在纸质板上的固体材料。
They are composed of four different materials, which must be uniformly deposited on a backing material, or substrate.
它们由四种不同元素组成。四元素沉积在一基质元素中。
In its substrate material: can deposited metal or form membrane of the material.
基体材料：能在其上沉积金属或形成膜层的材料。
The article summarizes the application prospect of the SEM in PCB and introduces the application of the SEM in the laminated craftwork, substrate material, surface processing and other aspects.
综述了扫描电镜在印制板行业中的应用前景，介绍了扫描电镜在高精度和高密度PCB板中的层压工艺、基板材料、表面涂覆及其它一些方面的应用。
The bonding strength is ensured by the correct choice of substrate material, surface preparation, adhesive and process parameter.
粘合强度可以通过选择正确的基体材料、表面处理、胶粘剂和工艺参数得以保证。
In mechanical products using electrolysis deposited on attachment good, but the performance and substrate material of different metal coating technology.
利用电解作用在机械制品上沉积出附着良好的、但性能和基体材料不同的金属覆层的技术。
Some properties demonstrated that BSTS polar glass-ceramics is a promising material in the high temperature applications and can be used as an alternative substrate of SAW devices.
部分性能的测试表明BSTS极性微晶玻璃在高温区应用方面很有前途，并且是一种比较有前途的SAW基片替代材料。
Anticorrosion of aluminum material may decrease when it is reinforced using SiC and graphite particles with high volume fraction and potential different from substrate.
基体中加入与铝合金基体电位不同、高体积分数的碳化硅和石墨颗粒增强材料，可能导致材料的耐蚀性降低。
Substrate, which is the most important material in eco-engineering for rock slope protection(EERSP), is the substance basis for stable growth of vegetation.
基质混合物是岩石边坡植被护坡工程植被稳定生长的物质基础，在有限的物质条件下，其功能实现决定于功能材料的效应发挥。
Based on developed numerical simulation method, the impacting behavior of copper particle colliding copper substrate in process of transforming material property is investigated.
采用有限元数值计算方法，研究冷喷涂材料改性过程中铜粒子与铜基体非垂直碰撞的变形行为。
Process review shows that the substrate material is the key factor for the carbon films deposition, and the parameters of ion energy, pressure and methane ratio are impotent also.
工艺研究结果表明，衬底材料对制备该新型纳米碳膜具有关键作用，离子能量、工作压力及气氛等工艺因素也具有重要作用。
Combinatorial material chip technology provides a new way to fabricate multi-element arrays with different parameters on the same substrate by using a series of masks.
组合材料芯片技术是用一系列掩膜在同一块基片上获得含不同参数单元样品面阵的方法。
It is pointed out that the improvement of cohesion properties of interface between coatings and substrate is a key in the research and application of plasma spraying material.
指出了喷涂材料研究应用中仍然存在的问题，也是关键的问题，即涂层与基体的界面结合。
The principle of the co metabolism and the optimal material used as co metabolic substrate were demonstrated in this paper.
此外，这阐明了共代谢原理和适宜作高分子量多环芳烃共代谢底物的物质。
Taking the polymer as the substrate material would have wide commerical applications because of the low costs of the material and microreplication.
而以聚合物作为基片材料，由于材料成本较低，且微复制方法成本也很低，因此可望在商业上取得广泛的应用。
To obtain optimum adhesion, it is necessary to increase the surface energy of the substrate to just above that of the material to be applied.
为了获得最佳的附着力，有必要增加基板表面能量略高于材料的适用。
The coating procedure thereof is described in terms of the material selection, substrate treatment, stain primer, binding primer, surface primer, finishing and et al.
分别对材料选择、底材处理、底着色、涂一道底漆、涂二道底漆、面修色、涂面漆工艺进行了处理。
Material: MDF substrate, AAA Grade walnut veneer veneer, solid wood edge, steel legs of the table, with Vice-desk and push cabinet.
材质：中密度板基材，AAA级胡桃木木皮贴面，实木封边，钢制台脚，配副台和推柜。
The effects of substrate material and surface roughness on it are studied.
研究了衬底材质及表面粗糙度对薄膜结构的影响。
The method USES a stamp having a relief structure to transfer a mask material to a substrate and form a pattern of open area on the substrate.
该方法使用具有浮雕结构的压模，将掩模材料转移至基材并在基材上形成敞开区域的图案。
Result: the developed material was in line with the required property of solid pyrolytic carbon without substrate.
结果：研制材料符合无基体全热解碳品质。
The formulation of the nano composite material comprises the step of: sintering a micron substrate, a nano strengthening phase, rare earth, a grain growth inhibitor and the like at high temperature.
本发明的纳米复合材料配方由微米级基体、纳米级增强相、稀土和晶粒生长抑制剂等高温烧结而成。
To obtain optimum adhesion, it is crucial that the surface energy of the substrate is equal or higher than the surface energy of the material to be applied to the polymer.
为了获得最佳的附着力，重要的是，表面能的基材等于或高于表面能量的物质，适用于聚合物。
The mask material is removed from the substrate, forming the pattern of functional material on the substrate.
从基材上除去掩模材料，在基材上形成功能材料的图案。
The mask material is removed from the substrate, forming the pattern of functional material on the substrate.
从基材上除去掩模材料，在基材上形成功能材料的图案。
应用推荐