With same material and technics, bond strength of parallel lay-up is higher than upright lay-up.
材料和工艺相同时，顺纹组坯时的胶合强度高于垂直纹理组坯时的胶合强度。
This article will expound how to aquire high quality sculpt under the limit of material and technics through two designs—design of gassing machine and design of Anpuli lamp.
通过“加气机设计”和“安普利节能水下灯设计”两个具体的设计案例，详细阐述了如何在受到材料、加工工艺等限制下如何设计出低成本且具有较高艺术价值的外观造型。
The main content and achievements of the paper are briefly summarized as following:1, The performance of CFRP members is concerned with the colophony, core material and technics.
碳纤维复合材料构件的性能与基材、芯材的力学性能以及成型工艺有关，其构件设计应在材料、结构和工艺三方面通盘考虑。
The extrusion of the part material and sacrificial support material is one of the key links in the technics.
该工艺中支撑材料和零件材料的挤出是关键环节之一。
According a new product, technics, material and quality status, establish and/or revise PFMEA, control plan, SOP, and provide the training files for work station and workers.
根据新产品、新工艺、新材料及质量状况等变化，建立或更新失效模式分析、控制计划、作业指导书等工艺文件，并培训宣贯至相应工位和人员。
The essentiality of painting managing are introduced by person, equipment, material, technics and environment, and the question of our plant on painting aspect are emphasize introduced.
从人、涂装设备、涂装材料、工艺和环境五个方面来介绍涂装管理的重要性，并指出本厂在涂装方面存在的问题。
Filtration and sterilization mechanism, manufacture technics and method, performance and application status of this new air filtration material (filter) are introduced in detail in this paper.
本文详细介绍了这种新型空调过滤材料(器)的过滤和灭菌机理、制备工艺和方法、性能及应用情况。
The used life of mould in production is closely relative to the feature level, material quality , fit use or not and the technics of heat treatment and so on .
模具在生产中的使用寿命与模具用钢的性能水平、材质优劣、使用合理与否以及热处理工艺等等都有着密切的联系。
The material research status and processing technics of tantalum and tantalum alloy liner will be introduced here.
本文介绍了钽及钽合金药型罩材料与加工工艺的研究现状。
And, relatively economical grouting material ratio was determined, by laboratory material test. The feasible grouting technics and monitoring method was worked out by the field test.
通过室内材料试验得到了相对经济的灌浆材料配方，通过灌浆现场试验得到了可行的灌浆工艺和检测方法。
The preparation technics of the new type cushion packaging material that took the corn straw and amylum as the primary composition was developed.
研究了以玉米秸秆和淀粉为主要成分的新型缓冲包装材料的制备工艺。
Combined the condition and requirement of the research project, experimental research are done to the fundus material, plating material and the technics of plating of laser chaff.
根据课题研究需要并结合实际条件，对激光箔片的基底材料和镀层材料进行了分析，并对镀层工艺进行了试验研究。
The dissertation emphasizes the use of the new material, new technics and new technique…
同时借鉴国内外的成功经验，强调对新材料、新工艺和新技术的应用。
Using tomato as main material, the fermentation technics of tomato vinegar through alcoholic fermentation and acetic acid fermentation were studied.
对以番茄为主要原料，通过酒精发酵和醋酸发酵生产番茄醋的工艺进行了研究。
This paper about the technics is to use the material of haloid liquid, ammonium bicarbonate and ammonia to preparate the super light MgO.
本研究所述的工艺是采用卤水、碳酸氢铵和氨水为原料，生产特级轻质氧化镁的方法。
Shen is in charge of courses such as "Solar Cell Technics", "Condensed State Physics Experimental Method" and "Analysis and measurement for Material".
在教学和人才培养方面，主讲“太阳电池工艺”，“凝聚态物理实验方法”“材料分析与表征”等课程。
Brought forward some material measure about energy saving in control system and diffused aeration system combining the characteristic of MSBR technics in wastewater treatment.
结合MSBR的工艺特点，提出了污水处理过程在控制系统和曝气系统中的一些具体节能措施。
The study has laid a base for material process parameter optimization, tool selection optimization and technics programming.
铣削加工有限元模拟研究为铝合金切削加工的工艺参数优化、刀具的优选和工艺规划奠定了基础。
This text introduced 90% methomyl soluble powder material unit consumption formulation and produce the technics between craft and product characteristic.
本文介绍了90%灭多威可溶性粉剂原料配方、生产工艺及产品的性能。
It is introduced a puller applied to purification of rare earth (RE) material, according to the float zone (FZ) technics of crystal growing, interprets main structure and characteristic of the puller.
介绍了一种用于稀土金属提纯的单晶炉，根据区熔法提纯单晶的特殊工艺要求，分析了其主要结构及特点。
Idiographic technics and flow were put forward in order to provide technical foundation for utilizing cottonseed oil material.
提出了具体的研制工艺和流程，为棉油脚的综合利用和硬脂酸产品的产业化提供技术依据。
The selection of macromolecular elastic material, model design and production, and the producing technics of ballast padding plate for urban rail are analyzed and evaluated.
对城市铁路轨道道碴垫层研制从高分子弹性材料选择、模具设计加工及生产工艺三方面进行了分析与评价。
On the base of test analyse about its physical and mechanical properties, developing material study of impermeability and cast technics.
在对混凝土试样的物理力学性能测试分析的基础上，开展材料抗渗性能和浇筑工艺研究。
This paper introduces selection of raw material, technique properties and producing technics for WTS high efficient mortar admixture.
介绍了WTS型特效石灰晶的原材料选用、技术性能和生产工艺。
The technics characteristic of blast furnace transporting material system, the structure and function of PLC control system are introduced in this paper.
介绍了高炉上料的工艺情况和特点，可编程序控制器(PLC)控制系统的结构和控制功能。
The improvement scheme range includes plan management, information transport in production process, technics, equipment disposing, material flow, locale management and so on.
主要对计划管理、生产过程的信息传递、工艺改善、现场设备布置、现场物流、现场管理等提出了改善方案。
The purpose of the study is to make certain the proportion and solidified technics of grouting material of solidified mortar diaphragm wall, rightly compute stresses and strains on it.
目的研究固化灰浆防渗墙墙体浆材的配合比及固化工艺，计算实际墙体的应力与应变等力学参数。
At the same time, the paper also analyzed the mechanism of this material performance. At last, the paper studied the manufacture-technics and construction - technics.
同时，还对聚氨酯弹性嵌缝料性能进行了机理分析，最后，对生产和施工工艺进行了研究。
At the same time, the paper also analyzed the mechanism of this material performance. At last, the paper studied the manufacture-technics and construction - technics.
同时，还对聚氨酯弹性嵌缝料性能进行了机理分析，最后，对生产和施工工艺进行了研究。
应用推荐