Both nonlinear effects of material and geometry are taken into account.
同时考虑材料和几何两方面的非线性。
The mechanical feature of soft biological tissue, in view of its deformation behavior, is concluded as a problem of nonlinearity for both material and geometry.
针对生物软组织的变形，研究了生物软组织的力学特点：既是材料的非线性，又是几何的非线性问题。
The conditions which have an important influence on metal cutting are work material, cutting tool material, cutting tool geometry, cutting speed, feed rate, depth of cut and cutting fluid used.
对金属切削有重要影响的条件有工件材料、刀具材料、刀具几何形状、切削速度、进给率、切削深度和所用的切削液。
At the same time the effect of eccentricity ratio, speed ratio and the material, thickness of sub, geometry shape of polished die on removing efficiency are studied.
研究了偏心率和转速比对去除效率的影响，与此同时研究了抛光模材料、抛光模胶层厚度、抛光模直径以及几何形状与去除效率的关系。
The geometry and material characteristics of the anchorage and coupler components are in accordance with the appropriate European Technical Approval and that their premature failure is precluded.
锚固和连接器部件的几何和材料特性符合相应欧洲技术认可中的规定，且以消除前期破坏的情况。
Successful design of tools for the material removal processes requires, above all, a complete understanding of cutting tool function and geometry.
为材料的去除工艺而成功设计的刀具，首先需求的是对工具功能和形状的彻底了解。
The wheel web, by virtue of its geometry and material characteristics, is a good emitter of high-frequency sound, and is believed to be the primary source of curve squeal noise.
尺寸和材料的特性导致了轮辋是一个良好的高频声源，轮辋也被认为是曲线尖啸噪声的主要来源。
The performance of metal bellows is mainly decided by structure, geometry dimension, material and manufacture technology.
金属波纹管的性能主要取决于结构、几何尺寸、材料和制造工艺。
Some practical problems of this technology, such as tool material selection, special optimization index of cutting parameters and tool geometry determination, are discussed as well.
本文还深入讨论了刀具材料、特定的切削用量优化指标以及刀具几何参数确定等实际技术问题。
The contact pretension between the layers of cylindrical structure concerns the non-linearity of geometry and material, as well as the influence of interface friction.
多层圆柱结构的接触预紧问题，涉及到几何非线性和材料非线性以及接触面上摩擦力的影响。
Based on the experiments of G550 cold-formed thin-walled steel roof truss structures, an analysis model considering geometry and material non-linearity is established using general FEM software ANSYS.
基于已完成的G550冷弯薄壁型钢屋架结构承载力试验，采用通用有限元软件ANSYS，建立考虑材料和几何非线性的分析模型。
The analysis under the different wind load function's material misalignment and the geometry misalignment stability, obtains the different result finally.
分析在不同风荷载作用下的材料非线性及几何非线性的稳定性，得出不同的结果。
This article use nonlinear finite element method, considering the non-linearity both in material properties and in geometry of deformations.
本文采用的是非线性有限元法，它计及了材料和几何的非线性因素。
The tool, part geometry, machining conditions, tool-path and the material removal process are simulated by computer simulating technology to gain a rational optimized milling plan finally.
通过计算机仿真技术，模拟刀具、工件几何体、加工环境及刀具路径和材料去除的过程，最终在加工之前得到了合理、优化的加工方案。
The geometry, material, processing and arrangement of pick are introduced, and the reliability and the life are analyzed.
介绍了镐形齿的几何形状、材料、工艺及截齿的配置等情况，并对其可靠性及寿命进行了分析。
The model include material nonlinear, geometry nonlinear and state nonlinear.
模型包括材料非线性、几何非线性、状态非线性。
This article introduced the heat-resistant steel machining characteristic and at present USES in cutting the heat-resistant steel the cutting tool material, the cutting tool geometry parameter choice.
介绍了耐热钢切削加工特点及目前用于切削耐热钢的刀具材料、刀具几何参数的选择。
Because of material nonlinear, geometry nonlinear and contacting nonlinear, the small time step is adopted to improve convergence of the calculation.
由于计算中存在着材料非线性、几何非线性以及接触非线性问题，为了提高计算的收敛性能，采用了小时间计算步长。
The fluid material takes the shape of the die cavity and this geometry is finally stabilized by the solidification of the material.
液体材料充满型腔，随着材料的凝固，零件的几何形状最终固定下来。
So the effect of the material nonlinear and geometry nonlinear should be considered when the stability issue is analyzed.
所以在计算稳定问题的时候，应该计入几何非线性和材料非线性的影响。
The pacing technology in making the WDM device such as selecting record material, making sure recording geometry and exposure time are analyzed further.
进一步分析该WDM器件制作过程中诸如记录材料选择、写入光路及曝光时序的确定等关键技术环节。
Geometry nonlinear and material nonlinear and state nonlinear and dynamic load are involved in simulate course.
在模拟过程中涉及几何非线性、材料非线性、状态非线性和动态加载等问题。
Geometry nonlinear and material nonlinear and state nonlinear and dynamic load were involved in simulating course.
在模拟过程中涉及几何非线性、材料非线性、状态非线性和动态加载等问题。
Hysteretic behavior of steel beam-column web connections in steel frames under cyclical load is simulated by finite element method involving material, geometry and status nonlinear.
考虑材料、几何和状态三重非线性，对钢框架梁柱腹板连接在循环荷载作用下的滞回性能进行了有限元模拟。
It is pointed that the matching of material properties and joint geometry is fundamental to the thermal stresses relaxation in the design of joints of dissimilar materials.
本文分析了异种材料固相连接接头热应力形成特点及其影响因素，指出材料的力学和热学性能与接头几何的匹配是异种材料固相连接热应力缓和设计的基础。
The cut length depends on the strength, density of the structure material and its geometry size.
切口长度的大小取决于建筑物的强度、密度和几何尺寸。
The Numbers of half wave are related with the length of drill stem, the nature of geometry and material of drill stem and the rock coefficient.
而半波数则与钻柱长度、几何参数，材料性质及地层弹性系数有关。
The drawing process of thick wall is a problem of geometry non-linear and material non-linear, so it is very difficult to be solved by the method of elasticity and plastics mechanics.
而厚壁封头冲压成形过程属于几何非线性和材料非线性的问题，很难用弹塑性力学理论的解析法进行研究。
Finally, using ROSE early-binding and late-binding mode, the data information such as geometry, material and grid is written into the design object to output AP209 file.
最后，利用ROSE类库早、晚两种联编方式，将几何、材料、网格等数据信息写入到设计对象中，生成ap209文件。
Finally, using ROSE early-binding and late-binding mode, the data information such as geometry, material and grid is written into the design object to output AP209 file.
最后，利用ROSE类库早、晚两种联编方式，将几何、材料、网格等数据信息写入到设计对象中，生成ap209文件。
应用推荐