We calculate the best phase-matching angle according to the Sellemier equations of KTP and compare the quality of LBO.
根据KTP晶体不同的色散方程，对该匹配角进行了数值计算；并比较了LBO晶体的相关特性。
The influence of Mg concentration in doping on phase matching temperature, phase matching Angle, optical homogeneity, lattice parameter and density of the crystal is also stated.
掺镁浓度对晶体相匹配温度、相匹配角、光学均匀性、点阵常数和密度的影响。
Then, we present a method to determine the maximum compression ratio of interferogram by using the relationship between interferogram matching angle and spectrogram matching angle.
从而提出了利用光谱匹配角和干涉曲线匹配角之间对应关系来确定干涉图最大压缩比的方法。
At paraxial approximation the maximum of the matching function is increasing with increased divergence Angle. For different brightness of pumping light, the optimum value of the Angle is obtained.
发现在旁轴近似下，匹配函数的最大值随泵浦光发散角的增大而增大，在考虑到像散的影响后，得到泵浦光发散角的参考值。
Analyze the effect of suspension Angle rigidity on stress of frame-body carrying system. Emphasize the proper matching of suspension Angle rigidity and frame-body Angle rigidity in design.
分析了悬架角刚度对车架-车身承载系统受力的影响，强调在设计时应使悬架角刚度与车架-车身角刚度合理匹配。
The principles of laser frequency transformation and the theory of phase matching in nonlinear optic crystals are also discussed. Based on this theory, Angle of phase match is calculated.
在总结激光频率变换的原理和非线性光学晶体的相位匹配理论的基础上，可以根据相位匹配理论进行晶体的相位匹配角的计算。
Compared with the whole attitude Angle matching recognition methods, the proposed method need small memory space and small calculation time.
与一维距离像全姿态角匹配识别方法比较，具有计算量、存贮量较小的特点。
This article make the improvement of the wise use of the SAD on the angle of the Video code Block Matching Motion Estimation.
该文从视频编码块匹配运动估计的角度，对当前普遍使用的SAD算法进行了改进。
A New Method for Measuring the Rifling Angle of Artillery Pipe Based on Template Matching.
基于模板匹配的火炮身管膛线缠角测量技术研究。
Optimizing the matching net and reducing the phase angle between the output voltage and current to reduce the reflection power of the loads, iv.
优化匹配网络，减小负载电流和电压的相角，以减少负载反射功率；
Image registration is the process of matching two or more images that get from the same scene derived from different time, different sensors or different views of Angle.
图像配准是对取自不同时间、不同传感器或不同视角的同一场景的两幅图像或者多幅图像匹配的过程。
A method based on fuzzy C-mean clustering and image matching algorithms are proposed to detect atomization Angle and uniformity, applied to performance test-bed of engine nozzle.
提出了基于模糊C均值聚类和图像匹配，检测喷雾锥角和喷雾不均匀度的方法，并应用于发动机喷嘴性能检测。
Universal set of technology, make precision machine tool spindle use Angle contact ball bearing realized either way matching use.
万能组配技术，使精密机床主轴用角接触球轴承实现了任意方式的配对使用。
And use multi-base stereo matching to solve matching problem of disaccord join-angle between close and far scene in image.
采用基于多基线的立体匹配技术，解决树木影像中近景区域和远景区域影像变形不一致的匹配矛盾。
This paper proposes an optimization method on the plate shaving cutter, its optimal solution is the premises matching the smallest toothing Angle on the condition of the last cutting grinding.
本文提出了一种盘形剃齿刀的优化设计方法，其最优解是最后一次刃磨时的最小啮合角对应的条件；刀具寿命期间，保证进入双齿啮合剃齿。
For matching turbine work condition, designed a diffuser that transformed square to round, chose Central Line and shape changed method, defined diffuser expanding Angle.
给出了一种亚音速方转圆扩压器的设计方法，并对中心线形状、型面变化规律和扩张角等进行了选择和说明。
Presents the matching between rotary electronic dobby and loom in signal transmission, focusing on the relation between signal setup and stop angle.
论述了旋转式电子多臂机与织机在信号传递方面的配合问题，着重分析同步信号的设置与织机停车角度之间的关系。
This applies to matching parenthesis, brackets, and angle brackets as well.
这也适用于对称的括号、括弧和角括弧。
The bandgap of the sample is detected, with the result basically matching the calculation, moreover the relation between centre wavelength of bandgap and incident Angle is studied.
测量所制备样品的带隙，其结果与理论计算基本相符，同时研究了带隙中心波长与入射光角度的关系。
It USES optical PMMA secondary light distribution technology. Viewing Angle, light-gathering effects and color matching all can be adjusted according to demands.
采用光学级PM MA二次配光技术，可根据需求调整发光角度、聚光效果及颜色搭配。
This paper focuses on the comparison of the matching of dies and floating plugs with different Angle with the aid of 2d axisymmetric elastic-plastic FEM and the influence of drawing copper tubes.
采用二维轴对称弹塑性有限元法对比分析了不同外模模角和游动芯头锥角的配合对拉拔铜管的影响。
This paper focuses on the comparison of the matching of dies and floating plugs with different Angle with the aid of 2d axisymmetric elastic-plastic FEM and the influence of drawing copper tubes.
采用二维轴对称弹塑性有限元法对比分析了不同外模模角和游动芯头锥角的配合对拉拔铜管的影响。
应用推荐