Duplicate the bottom layer and place it on the top. Then place it in the clipping mask.
复制底部的模特图层，并将其置于顶部，然后将其设为剪切蒙版。
Add a layer mask to this layer as shown below, this will create a better lighting contrast for the hand and make this overall image look better.
按照下面的样子，添加一个图层蒙版，这样可以给整个画面增加整体光的对比度，画面看起来会更好一些。
Then set the layer to Overlay blending mode and use a mask to round off the corners.
然后将这个图层的混合模式设置为叠加，并用蒙版圆滑转角。
Group all the shapes used to compose the robot and Add a Layer Mask, as previously done, to obtain the following result.
把这些形状归成一组，组成机器人，并添加一个图层蒙版，以前也做过，得到以下结果。
Remember to put it in a new layer and to mask it in the same way.
请记住，把它放在一个新的层，以掩盖它以同样的方式。
Add layer mask and paint some parts of the line with black.
添加图层蒙版和油漆的部分用黑线。
Click on the Add a layer mask button at the bottom of the Layers Panel and select the Brush Tool (b).
点击图层面板底部的添加图层蒙版按钮，并选中画笔工具(B)。
A layout method for a mask includes creating dummy pattern inhibiting regions and a single dummy pattern type for a layer.
一种掩模的布图方法，包括为一层建立虚设图案抑制区域和单一类型的虚设图案。
Select the faceof the 3D object and create a new layer from it. Fill this layer with red. Go toLayer>Create Clipping Mask.
选择3D对象的面并从它创建一个新层。这层填充为红色。转到图层>创建剪贴蒙版。
The mask was made by creating a new layer and moving it to the top of the other layers.
我创建一个图层来进行遮罩，将其移到其它图层的顶部。
Create a layer Mask for this layer and fill it with black. This will hide all the effect.
为该层建立一个图层蒙版并填充黑色，它将隐藏所有的效果。
In layer window unlink the mask and map.
在层面板下取消蒙版和地图的链接。
Now to give it a little punch, duplicate that layer, set its Opacity to 68%, and apply the following Curves (Command + m) to its transparency mask and you get this.
现在，给数码音量图添加一些视觉刺激。复制图层，设置不透明度为68%，并且对透明图层应用下图曲线(COMMAND +M)。然后，你得到了这个。
Mask the layer and fill it with black. Then using a white brush, paint over the clouds.
蒙版该层并覆盖为黑色，然后运用白色笔刷，把云彩盖上。
The circuit board comprises a dielectric layer, a circuit layer and at least one electricity-conducting joint pole and a solder mask.
一种电路板，其包括介电层、线路层、至少一导电接合柱与焊罩层。
Make the mask edges of orange color. Copy the layer for this that contains the mask and give it an intensive orange color.
将面膜部分上上桔黄色。复制层，副本的橘黄色加深一下~。
The solder mask is configured on the dielectric layer and covers the circuit layer.
焊罩层配置在介电层上且覆盖线路层。
Step 17create new layer and convert it to Clipping Mask. Draw shadow on lower corner to add depth onto the shape.
新建图层，将它变为剪贴图层，在角落画阴影增添图形的深度。
Name this layer as "water texture" and right-click the layer, select "create clipping mask". Change the blending mode to "Overlay".
命名图层为水图层，点击右键-创建剪贴蒙板，图层模式-叠加。
The face mask consists of double-layer non-woven cloth in which filter layer, nose bridge bar and face mask belt is set, or is made of multi-layer medical absorbent gauze.
口罩由双层无纺布中间夹过滤层、鼻梁条和口罩带构成，或由多层医用脱脂纱布经缝制而成。
Please see below picture, those letters overlap at circuit layer and solder mask. We suggest deleting the letters in solder mask layer.
如图，那些字在线路和阻焊层都有，我们建议删除阻焊上的字。
I added a layer mask to rendering 2 and began selectively erasing areas that I didn't want showing through.
我在第二个渲染图中添加了一个图层，开始有选择性地擦除我不想呈现出来的区域。
A second insulating layer is formed on the fin exposing a top surface of the mask, wherein a protection layer is deposited between the fin and the second insulating layer.
第二绝缘层形成在鳍部上而暴露了掩模的顶表面，其中保护层沉积在鳍部和第二绝缘层之间。
Rename this layer as "Tower". Then add a vector mask to this layer, grab the gradient Tool and apply the following gradient to the mask.
命名图层为铁塔图层。然后添加一个蒙板，选择渐变工具，给蒙板添加如下图所示的渐变。
The mask layer can adhere to the polymer layer during thermoforming and other secondary processing steps.
在热成型及其它二次加工步骤中，掩模层可以被附着在聚合物层上。
The utility model relates to a disposable health face mask piece, which is composed of a plastic face of an outer layer, face mask paste of a middle layer and a lining gauze.
一种一次性保健面膜块，是由外层塑胶面、中间层面膜糊、里层纱布组成。
A semiconductor package substrate for preventing deformation mainly comprises a flexible dielectric layer, a plurality of pins, at least one reinforced metal pattern and a solder mask layer.
一种改善变形的半导体封装基板，主要包括一可挠性介电层、多数个引脚、至少一补强金属图案以及一防焊层。
The process of making carbon nanotube array includes the following steps: providing one substrate and forming one mask layer on the substrate;
本发明涉及一种碳纳米管阵列制作方法，其步骤包括：提供一基底，在该基底上形成一遮挡层；
The solder mask layer is formed on the flexible dielectric layer to locally cover the pins and to cover or expose the reinforced metal patterns according to different application.
该防焊层形成于该可挠性介电层上，以局部覆盖该些引脚，并依不同应用可覆盖或显露该补强金属图案。
The solder mask layer is formed on the flexible dielectric layer to locally cover the pins and to cover or expose the reinforced metal patterns according to different application.
该防焊层形成于该可挠性介电层上，以局部覆盖该些引脚，并依不同应用可覆盖或显露该补强金属图案。
应用推荐