The main data structure used in the program is given, By means of program flow chart, the program is described in detail.
对程序中用到的主要数据结构及作用做了说明，并借助流程图详细介绍了行编辑程序各功能的实现过程。
Emphasis is put on the structural flow-chart of the program and its main functions.
本文重点介绍了实用程序的结构流程图及其所完成的主要功能。
Base on the main problem of vacuum ejector waste system, this paper set out overhaul flow chart and raise check and overhaul method.
根据污物收集系统的常见故障，列出了检修流程图，提出了检查方法和检修要点。
In the software aspect, it curtly introduces flow chart of main program and the programming method of all ports of circuit.
在软件方面，介绍了主程序的流程图及各部分电路的编程方法。
The main hardware theory and software flow chart are provided.
提供了主要的硬件原理图和软件框图。
The flow chart of RTP main function and the realization method flow chart of office end and user end is presented based on IP2022.
并给出了在网络处理器IP2022中实现实时传输协议的主函数的流程图及局端与用户端的实现方法流程图。
The flow chart of RTP main function and the realization method flow chart of office end and user end are presented based on IP2022.
并给出了在网络处理器IP2022中实现实时传输协议的主函数的流程图及局端与用户端的实现方法流程图。
This paper introduces the bridge analysis theory at length, and explains the design principle, flow chart, main variables in BSAP program in details.
本文详细论述了BSAP程序的计算理论，对BSAP程序的设计原理、程序流程框图及程序中的主要变量进行了细致的说明。
Flow chart and design thought of main and subprogram is presented in software design part.
软件设计部分给出了主程序和子程序的流程图及软件设计思路。
The engineer presented the main points of the technical problem clearly on a flow chart.
这位工程师把那个技术问题的要点清楚地表现在流程图上。
Then set the main variables and their types, and draw the flow chart of every subsystem respectively, build dynamic equations and set model parameters.
随后确定系统中的主要变量及其种类，再分别绘制各个子系统动态学流图，建立动态学方程并确定模型参数。
And the preliminary design must complete design instruction booklet one, Sewage treatment plant total floor-plan, elevation chart, flow chart, main equipment drawing.
其中初步设计要完成设计说明书一份、污水处理厂总平面布置图一张、高程图一张，流程图一张，主要设备图一张。
The main method, principle, processing flow chart and application examples are given.
文中给出了方法原理、处理流程及应用实例。
This article detailed introduction system each hardware performance and function, as well as software design mentality and main software module flow chart.
本文详细的介绍了系统各个硬件的性能和作用，以及软件设计思路和主要软件模块的流程图。
This article describes the design of its hardware and shows the main program flow chart.
本文介绍了其硬件电路的设计，并给出了主程序的流程图。
The emphases are programming language design, control software composition, main function modules of control software, program flow chart of the controlling module.
重点介绍了测控软件的编程语言设计、测控软件构成、测控软件主要功能模块、测控模块程序流程图。
Finally, the thesis designs software system, gives the partition of software functional modules and the flow chart of main program.
最后，对软件系统进行设计，完成了功能模块划分并给出了主程序流程图。
Flow chart of system main software is given, how to use waveform interpolation theory to heighten USB (Usable Store Bandwidth) and how to rebuild the waveform are studied.
本文给出了系统的主程序流程图，并研究了如何利用波形插值技术以尽量小的采样频率实现尽量高的有效存储带宽(usb)、如何实现波形重现等问题。
By engineering calculating, the flow chart and the engineering capacities of the main PSB reaction tank, the secondary setting tank and the seaweed pond are obtained.
通过工程计算，设计出工艺流程图及光合细菌反应池、二沉池和海藻塘的工程容量。
The paper introduces the composition, hardware and function of control system of the Flexible-Profiling Coating system. The software control flow chart and main technology is also presented.
介绍了用于轿车喷涂的柔性仿形自动喷涂系统仿控制系统的结构、配置、功能，及其关键技术，给出了软件控制流程。
The author designs a software of communication based on the communication interface RS485, and shows the flow chart of the main program.
作者利用通信接口rs485设计编制了一套通讯软件，给出了主程序流程图。
In Software design part, this paper introduces the principles of main programme for each module and gives the design flow chart.
软件部分则对控制器各模块的主要程序进行了原理介绍，给出了设计流程图。
Having realized the modulation and demodulation algorithm of ASK, FSK, QPSK on the software radio platform, and has provided the modulation and demodulation flow chart and the main part procedure.
在软件无线电平台上研究并实现了ASK、FSK、QPSK等方式的调制解调算法，并给出了调制解调的流程图和主要部分的程序。
Through the flow chart, the article has a brief analysis of the working principle and the main points of software programming.
文中通过程序流程图简要分析了系统的工作原理和软件编程要点。
The hardware design of the main modules of the servo system was described in detail. The system software design idea and flow chart were given.
详细介绍了该伺服系统各主要模块的硬件设计，给出了系统的软件设计思想及流程图。
This paper gives a detailed introduction on mechanical structure, hardware and software design, meanwhile, present a part of circuit diagram as well as the main program flow chart.
详细介绍了锁的机械结构、硬件设计方案和软件设计方法，并给出了部分电路图和程序主要流程图。
The general idea of design and the design method of main parts are discussed. Some problems in the software are introduced. The flow chart is listed.
文中概述了总体设计思想和各主要部分的设计方法，对软件设计中的一些问题进行了简要的介绍，并给出了程序设计流程图。
The hardware of these modules are introduced, and flow chart of the software on the main module are given.
文中对各个模块的硬件都作了介绍，并且给出了主模块上的软件流程图。
The basic circuit diagram, the main program flow chart and the display interrupt flow chart of four Chinese characterses display module are also given.
给出了四汉字显示模块的硬件电路原理图、主程序流程图以及中断显示流程图。
The basic circuit diagram, the main program flow chart and the display interrupt flow chart of four Chinese characterses display module are also given.
给出了四汉字显示模块的硬件电路原理图、主程序流程图以及中断显示流程图。
应用推荐