Described are the development target, main technical features and parameters, main structure, finite element calculation results and testing of the 4d-axle welding frame type bogies.
介绍了4d轴焊接构架式转向架的研制目标、主要技术特点和参数、主要结构、有限元计算结果及试验情况。
The advantages of rectangle and ellipse ceramic burner, their design principle, the selection of main parameters and determination, the calculation of the flow resistance are briefly intro - duced.
本文介绍了内燃式热风炉矩形、椭圆形陶瓷燃烧器的优点、设计原则、主要参数的选择、主要结构尺寸的确定及阻损计算等。
Based on the knowledge of mechanical theory, a way for the field determination and calculation of the main parameters of involutes gears was presented.
介绍了工程技术人员在现场条件下，利用所学机械理论知识，对渐开线齿轮的主要参数进行测量和计算的一种方法。
Briefly described are the structure, main technical parameters and strength analysis calculation of the low-side flat car.
简要介绍了低边平车的结构、主要技术参数和强度分析计算情况。
Features, calculation of heat balance, main technological parameters of choice about huge resistance furnace for hot galvanized tube are described in this paper.
介绍了镀锌钢管用大型电阻炉的特点，热平衡计算，及锌锅壁厚、主要技术参数的选择。
The design basis includes the main parameters, the type of vessel, the design of structure and the calculation of the main pressure elements.
着重介绍了设计中主要参数的确定，容器类别的划分，主要受压元件的计算和结构设计。
Calculation formulae of the main dimensions and the parameters of primary and secondary windings of such motors are derived.
文中推导了此种电机的主要尺寸、初级与次级电磁参数的计算公式。
The paper elaborates the relation of main factors influenced on the drilling speed of hydraulic roofbolter, which provides a calculation basis for reasonable match of main parameters of roofbolter.
系统阐述影响液压锚杆钻机钻进速度的主要因素之间的关系，为锚杆钻机主要参数的合理匹配提供了计算依据。
The calculation part includes die precision calculation, main structure parameters of die and punch, and pressing center calculation.
计算部分有模具精度计算，凸凹模主要结构参数计算和模具压力中心计算等。
We describe in detail the influence of the main parameters on all the performances in the system through the analysis and calculation of main design parameters of the pump.
这里通过对该泵的一些主要设计参数的分析及计算，详细地阐述了各参数在系统中对各项性能的影响。
The main parameters of hydraulic system of HC refiner, the draft of the diagram of hydraulic system, the selection calculation of hydraulic oil and the elements are presented in the paper.
介绍高浓盘磨机液压系统的主要性能参数，液压系统原理图的拟定，液压油及液压元件的选型计算。
This paper presents a high anti-jamming transmission-circuit for input and output signals of DSP, gives the design and calculation of the main parameters of the circuit.
介绍和比较了现有的DSP输入输出信号传输方法，设计了一种高抗干扰的DSP输入输出信号传输电路，论述了该电路工作原理，给出了电路主要参数的设计计算。
This paper discussed the design of a new type of hydraulic system of malt lifting box, theselection of basic circuit and the calculation of the main parameters in the beer industry.
本文论述了啤酒行业新型麦芽升降箱液压系统的设计、基本回路的选择和主要参数的计算。
The calculation model of BOOST thermodynamic process for original diesel is built according to the main technical parameters and the experimental results of R6160ZC diesel.
通过R 6160zc柴油机主要技术参数及原机试验结果，建立了原机BOOST热力过程计算模型。
This paper analyses the main principle, adhesion factor, traction and relative parameters calculation of mine electric locomotive.
介绍了矿用电机车的简要工作原理、粘着系数、牵引力及其相关参数的选择与计算。
Meanwhile, main design parameters for structures are determined in design and calculation and project design is completed.
并经过设计、计算确定了各构筑物的主要设计参数，完成了工程设计。
This paper introduces the application fields and main technical parameters of the crane as well as its construction and calculation method.
本文介绍该起重机的用途、主要技术参数选择、构造与设计计算方法。
The main parameters of the catalytic reactor is determined based on calculation.
同时，论述了催化反应器的设计中主要参数的确定。
The structure, technical parameters, main feature, design&calculation and test auxiliary system and so on of new and high-performance test device for mechanical seals for agitators were introduced.
介绍了新型高参数釜用机械密封试验装置的结构、技术参数、主要特点、设计与计算及试验系统等。
The calculation of orifice, balance calculation of system parameters and analysis of turbine performances are the three main problems met in the test of turbo-pump linkage.
节流圈计算、系统调整计算和涡轮特性分析是涡轮泵联动试验中的三个主要问题。
The paper presents the nuclear design criterion, reactor core characteristics and main parameters, and shows some computer codes, calculation results and analyses.
本文介绍了CPWR640反应堆的核设计准则、堆芯特性与主要参数，并给出了堆芯核设计的主要计算机程序、计算结果及分析。
Depending on the theory of hydraulics, this paper describes the method for calculation and determination of the main parameters for establishing smooth and steady air cushion in air-cushion rugulator.
运用流体力学的计算理论，论述了在气膜 调偏机中形成均匀稳定的气膜的主要参数的确定和计算方法。
The calculation results show the effect of the number of main beams and the load parameters on the dynamic instability region.
计算结果显示了主向梁数目和载荷参数对动力不稳定区的影响。
Described are the main technical features, main technical parameters, main structure as well as the calculation and test results of the EQC-M01 meter gauge bogies exported to Tailand.
介绍了出口泰国EQC—M 01型米轨转向架的主要技术特点、主要技术参数、主要结构以及计算和试验结果。
The main calculation results are parameters of X, CV and CS for line fitting method and designed value XP of any assignment frequency.
主要计算结果为适线法确定的参数X、CV和CS，以及任何指定频率的设计值XP。
This paper introduces the application fields and main technical parameters of the crane as well as its construction and calculation m...
本文介绍该起重机的用途、主要技术参数选择、构造与设计计算方法。
Defined parameters were appropriate, which can reflect main flow in draft tube. It also instructed that the calculation was correct.
求解过程中各参数的设置合理，可以较好地反映尾水管中的主要流动现象，同时也说明了流场计算结果的正确性。
Defined parameters were appropriate, which can reflect main flow in draft tube. It also instructed that the calculation was correct.
求解过程中各参数的设置合理，可以较好地反映尾水管中的主要流动现象，同时也说明了流场计算结果的正确性。
应用推荐