The front-end amplifier for optical receiver is made up of two important circuits: preamplifier and main amplifier.
光接收机前端放大电路主要由两个关键电路构成:前置放大器和主放大器。
In the building blocks of an optical transmission system, the pre-amplifier and the main amplifier are the critical parts.
在用于光纤传输系统的几个功能电路中,构成光接收机前端放大电路的前置放大器和主放大器是两个关键电路。
Circuits of CMOS-process-compatible monolithic photoreceivers are designed. The circuits include photodetector, pre-amplifier and main amplifier.
设计了与CMOS工艺兼容的光电单片接收机电路,其中包括光电探测器、前置放大器和主放大器。
The compensation amplifier consists of main amplifier and an auxiliary one. The auxiliary amplifier reduces input offset drift on output of the main one.
补偿放大器是由一个主放大器和一个辅助放大器组成,辅助放大器消除了主放大器自身的失调漂移。
As for the non-linear negative feedback program, it is mainly composed of the main amplifier and nonlinear feedback loop, and it has adaptive performance.
而对于非线性负反馈方案,它主要由主功放和非线性反馈回路构成,具有一定自适应的性能。
It consists of a multiwire proportional chamber, a delay line, a main amplifier, a timing single channel amplitude analyser and a time to amplitude converter.
它由多丝室、延迟线、主放大器、定时单道以及时幅变换器等组成。
The latter one was chosen to realize the main amplifier in our design since it has the features of simple topology, few external components and fast responsibility.
由于限幅放大器具有设计简单、功耗低、芯片面积小和外接元件少的优点,本文选择限幅放大器的形式来实现光接收机的主放大器。
The main amplifier USES proportion enlargement, widening the bandwidth, recording richer earth decline information, which can be well used in the earthquake forecast.
主放大采用了比例放大,带宽更宽,记录到的地倾斜信息更丰富,能够很好的应用于地震预报工作。
Used the switched capacitor Common Mode Feedback circuit(CMFB) in main amplifier to achieve a large output voltage swing and decrease the static power consumption at the same time.
主放大器采用开关电容共模反馈电路在获得大输出摆幅的同时降低了功耗。
Read and write-operations are carried out by two common data buses: one is connected with the 32 odd rows, the other is for the 32 even rows. The data output is executed by a common main amplifier.
读和写操作是通过两条公共的数据总线进行的:其中一条联结32个奇数列,另一条联结32个偶数列,用一个公用的主放大器把数据输出。
This paper introduces the structure and operation principle of the synchronous rotary hydraulic amplifier as well as the main data of performance measured during the test on platform.
本文介绍同步回转式液压放大器的结构和工作原理,以及它在台架试验中所测得的主要性能数据。
The design of input coupler for a Ku-band coaxial FEL amplifier is presented. Main parameters are given.
设计了同轴波导FEL放大器的输入耦合器,给出了该输入装置的相关参量。
The working principle, structure and main features of the coaxial flow amplifier are described.
说明这种同轴流量放大器的工作原理、结构和主要特点。
Actuation of one clutch provides positive torque to the final drive, the capstan acting as the main power amplifier.
一个离合器的作用是给最后一级传动机构,即作为主功率放大器的绞盘,提供正向力矩。
Materials with light amplification is a main part of fiber amplifier, which determine the power efficiency of fiber amplifier.
光放大材料是光纤放大器的主要组成部分,它决定光纤放大器的光放大功率。
In this paper, a method was applied to reduce the noise by analyzing the main noise resource affecting the audio amplifier.
通过分析影响音频放大器的主要噪声源,从内因和外因两方面提出了抑制噪声的措施和方法。
Materials with light amplification is a main part of light amplifier, which determine the power efficiency and flat gain bandwidth of light amplifier.
光放大材料是光放大器的重要组成部分,它决定光放大器的光放大功率及平坦增益带宽。
Built-in power amplifier circuits that can be a small system, and strong signal by cutting the main priority control.
内置功率放大电路,可以单独成为一个小系统,并受主信号强切优先控制。
The main hardware is composed of thermal resistor as temperature sensor, 87C51 single chip processor, as main control computer, together with amplifier and A/D transfer.
用热敏电阻器作温度传感器,87C51单片机作主控微机,加上放大器、模数转换器等组成主要硬件系统。
In this paper, A new method of system main loop analysis is quoted to analyse the behaviour characteristic of feedback amplifier with large signal, A ordinary analysis method and steps are given.
本文引用系统主回路分析的新方法—回路增益弹性法对大信号下反馈放大电路的行为特性进行讨论,并通过分析一个二阶反馈放大电路给出一般分析方法和步骤。
Main products: car audio navigation, audio, amplifier, subwoofer and other electronic products!
主要生产:汽车影音导航,音响,功放,低音炮等电子产品系列!
In this thesis, how to design the 1-bit amplifier is introduced, and the main task is to achieve the pumping signal using DSP.
本设计结合课题需要,采用了1比特数字功放的实现方案,利用DSP实现了1比特激励信号的输出。
RF predistortion is the main power amplifier linearization technique used for wideband repeater at present.
目前,射频预失真是宽带直放站所采用的主要功放线性化技术。
The main C and D power amplifier PA example on the analysis of resonant power amplifier circuit as well as a practical circuit Comparative Study.
主要以丙类功放和丁类功放为例分析介绍了谐振功率放大器的电路组成并对实用电路进行了比较研究。
The main target of debugging is a main line amplifier.
其调试的主要对象就是干线放大器。
The main function of the power amplifier is to get the highest output power at high efficiency.
功率放大器的主要目的是以高效率得到大的输出功率。
It is the key technology to detect and correct the phase noise of the fiber amplifier in coherent combining beam, the main source of phase noise in the fiber amplifier is the thermal effects.
光纤放大器相位噪声的探测和校正是光纤激光器阵列相干合成的关键技术,热效应是引起光纤放大器相位噪声的主要来源。
Without the minimum output power requirement in the main output just as magnetic amplifier, higher efficiency can be achieved in this circuit.
和磁开关不同,该变流器在主反馈输出上没有最小输出负载的要求,从而电路可以达到更高的效率。
This paper lays stress on the description of the three main features of KD1411: 1. the design of weak signal DC amplifier with programmable gain;
本文重点介绍了KD1411的以下三个主要特点:(1)增益可编程控制的微弱信号放大器的设计;
The problems in its application on audio frequency power amplifier and the main methods to solve them are pointed out.
分析了高频开关电源的特点及将其应用到音频功率放大器中所遇到的主要问题,以及解决这些问题的基本方法。
应用推荐