Cobalt is a naturally magnetic element.
钴是一种天然磁性元素。
Oil-retaining bearing, friction material, (soft and hard) magnetic element, electronic ceramics, electrical alloy, etc.
含油轴承、擦材料、软、性元件、子陶瓷、工合金等。
In the magnetic element (1), it is possible to enhance the fixing strength of the bases (3 and 4) with respect to the core (2).
采用该磁性元件(1)，能够提高底座(3、4)对于磁芯(2)的固定强度。
The invention provides a magnetic element capable of reducing configuration area relative to a mounting substract and realizing high density mounting.
本发明提供一种减小针对安装衬底的配置面积、可实现高密度安装的磁性元件。
The driving element comprises a first magnetic element and a second magnetic element, which are arranged in the first barrel and the second barrel respectively.
所述驱动元件包括分别设置于所述第一装筒和第二装筒的第一磁性元件和第二磁性元件。
Finally, the method of designing planer integrated magnetic element is discussed and a planer integrated magnetic element is designed for LLC resonant converter.
最后研究了平面集成磁件具体的设计方法，为LLC谐振变换器设计了一个平面集成磁件。
Most MRAMs that are now being developed write data by applying the magnetic field generated by a current running through a wire near a tunneling magnetoresistive element to change the magnetization.
第一代MRAM的数据写入方式主要是向导线中通电使其周围产生磁场，从而改变邻近的存储单元的磁化程度。
On this basis, as the permeability of permanent magnetism material is non-linear, two gear wheel's magnetic field is simulated with finite element software, and analysis of the result is carried on.
在此基础上采用有限元分析软件对永磁材料的磁导率为非线性时的一对永磁齿轮传动磁场进行了仿真分析，并对结果进行了分析总结。
The magnetic distribution of the single-coil and dual-coil magnetic rheological dampers with the same effective piston length was analyzed by using the finite element ANSYS software.
采用有限元ansys软件，分析了相同活塞有效长度下的单线圈与双线圈结构磁流变阻尼器的磁场分布情况。
On the base of introducing the principle of the magnetic flux leakage (MFL) detection, the finite element method based on ANSYS used to simulate and analyze the MFL signal is presented.
在介绍漏磁检测原理的基础上，详细论述了利用有限元法分析缺陷信号的方法以及利用ANSYS对漏磁信号的仿真过程和仿真结果，并对结果进行分析。
Alloy containing rare earth element, production method thereof, magnetostrictive device, and magnetic refrigerant material.
包含稀土元素的合金，其生产方法，磁致伸缩器件，以及磁性冷冻剂材料。
In this paper, an IBEM (Indirect Boundary Element Method) is presented for calculating permanent magnet field, and the formula of calculating magnetic field intensity is deduced.
本文提出用间接边界元法计算任意界面的永久磁铁所产生的空间磁场，推导出其磁场计算公式。
This paper proposed a kind of novel micro magnetic sensor array based on a so-called MOS hall element, which is a MOS device in fact, but works as a hall element.
介绍了一种新颖的磁性传感器阵列，它由制作在硅板上的MOS霍尔器件和控制单元构成。
It is shown that the microstructures, alloying element distribution and magnetic conductivity of P tude remarkably differ from those of s tube.
结果表明，两种渗碳管的组织、合金元素分布及导磁性存在着显著差别。
And then, we confirm the external conditions of finite element heat analysis after analyzing the cooling ways of multiple magnetic circuit transformers.
分析多磁路变压器的冷却方式，确定有限元热分析的外部条件。
To design the magnet structure, finite element method is used to analyze the permanent magnetic field.
在磁体结构设计中，本文采用有限元软件分别对单、双环形永磁结构进行了分析计算。
The system includes a power source and a magnetic coupling element for securing the power supply system to the electrically powered device.
所述系统包括电源和用于将所述供电系统固定于所述电动装置的磁耦合元件。
Difference manufacture methods for fabricating the key element-thin film magnetic pole was discussed.
本文重点讨论了用不同的工艺方法来制备薄膜磁头中的关键元件-磁轭。
The magnetic powder clutch, with its good static and dynamic mechanical characteristics, is a new type of automatic control element.
磁粉离合器是一种新型自动控制元件，它具有良好的静态和动态等特性。
Briefly introduces the finite element model of axisymmetric field and the results of magnetic field calculation in metal.
介绍了轴对称场的有限元模型及其用于计算金属内部磁场分布的结果。
To obtain a constant gradient magnetic field outside unilateral nuclear magnetic resonance (NMR), optimal design method based on finite element method (FEM) and topology optimization is proposed.
为了在单边核磁共振仪器外产生梯度恒定的磁场，提出利用基于拓扑优化和有限元法的优化设计方法。
The magnetic field distribution of one apparatus is evaluated by finite element method to well coincide with the measurements.
采用有限元方法对一套装置的磁场进行了计算，磁翅果与测量值吻合较好。
Based on three dimensional finite element analyses of magnetic fields, the cogging torque of a prototype motor is calculated using the virtual work and Maxwell stress tensor methods.
在电机内磁场三维有限元数值分析的基础上，采用虚位移和麦克斯韦张量两种不同的方法计算了电机的脉动转矩。
Their composition and struture are studied by element analysis, IR, UV visible spectra and room temperature magnetic susceptibility.
并用元素分析、红外光谱、电子光谱、室温磁化率等对其组成和结构进行表征。
The effects of stator and rotor eccentricity on the magnetic field distributions, cogging torque and unbalanced force were calculated in this paper by using finite element method (FEM).
采用有限元法计算分析了定子偏心与转子偏心对无刷直流电动机的气隙磁场、定位力矩及单向磁拉力的影响。
Because of good applicability and high precision the finite element analysis method has become the preferred method for numerical magnetic field computation of machines.
由于电磁场有限元分析方法具有通用性好、计算精度高的特点，因此成为目前首选的电机磁场数值计算方法。
The alternative magnetic flux leakage testing system based on A3515 Hall element was introduced, including its composition and operation.
介绍基于A3515霍尔元件的交变漏磁检测系统的设计，包括检测系统的组成和测试方法。
In this paper, a linear induction motor is taken as an example, the whole motor model is solved, and its magnetic field is calculated by finite element method.
以直线感应电动机为例，将整个直线感应电动机模型作为求解域，采用有限元法对其磁场进行了数值计算。
Additionally, optimization in structure design of vane MRF damper is completed by using the method of magnetic field finite element analysis, which will effectively enhance performance of damper.
采用磁场有限元分析的方法对叶片式MRF减振器的结构设计进行优化，可以有效提高减振器的性能。
Magnetic field finite element analysis of two different schemes of dampers is conducted through ANSOFT and then a scheme relatively ideal in magnetic field distribution is obtained.
利用ANSOFT电磁场分析软件对两种不同方案的减振器进行磁场有限元分析，得到磁场分布相对比较理想的一种方案。
应用推荐