The usual design of the magnetic controller always linearizes around the balance point and bases on the linear system theory to design the linear controller.
磁悬浮轴承的控制器设计通常是在平衡点附近进行线性化，按照线性理论设计线性控制器。
You first enable the console terminal (TTP) and associate the programmable asynchronous line controller (PAS) and magnetic tape controller (MT) to avoid device number conflicts.
您首先要启动控制台终端 (TTP)并将可编程异步线路控制器 (PAS)和磁带控制器 (MT)结合在一起以避免设备号冲突。
Rather than relying solely on an accelerometer, this controller USES a magnetic field to track both your hands' positions in 3d space.
除了一个加速计之外，该控制器还采用磁场跟踪你的手的三维位置。
This paper describes the program controller and the control system of distributing gear of a blast furnace with the application of magnetic logic elements.
本文主要介绍由磁性元件组成的高炉程序控制器及旋转布料器控制系统。
The routine PID controller had a bad adaptability on the operation of magnetic bearing system due to its inefficient parameter coordination.
常规PID控制器参数往往整定不良，性能欠佳，对磁轴承系统运行工况的适应性很差。
The work of this paper is is part of the design of robot toy controller system, the paper presents the principle and design of magnetic sensor in Direction control.
本文的实际工作背景是机器人玩具控制器设计的一部分，介绍了磁阻传感器的电路设计以及工作原理。
Finally, this paper presents an improved model of the magnetic chain, using a single neural network PID controller to adjust the stator flux, and set up the corresponding flux estimation model.
最后本论文提出了一种改进的磁链模型，引入了单神经元网络PID控制器来调节定子磁链，并建立了相应的磁链模型。
According to tuning theory and control method of the magnetic bias ASC, the fully digital controller of the magnetic bias ASC is implemented.
根据偏磁式消弧线圈的调谐原理和控制方法，深入研究了偏磁式消弧线圈的全数字化控制器。
This thesis narrates the hardware design of Magnetic Suspension ball Control System testing platform, including the design of displacement senor, controller and power amplifier.
本文着重介绍了磁悬浮球控制系统实验平台的硬件设计，介绍了包括位移传感器、控制器、功率放大器的设计过程。
The system is composed of tension measurer, tension controller, magnetic powder brake and so on. It has the feature of simple structure and stable performance.
该系统由张力检测器、张力控制器和磁粉控制器等部分构成，结构简单，性能稳定。
The specially designed magnetic drum controller allows the Chinese fonts on the drum to be retrieved not by drum address but by character codes match.
专门设计的磁鼓控制器不采用通常的寻址方式，而用按字模码搜索读鼓的方式取出汉字字模。
The electromagnetic field design and controller design of axial magnetic BLDC are studied in this paper.
本文研究了轴向磁场无刷直流电机的电磁设计及其控制器的设计。
It is proposed a magnetic bearing BP neural network PID controller design.
提出磁轴承bp神经网络PID控制器设计方案。
The research on the parameter of control system shows that the control rigidity of magnetic bearing designed by the controller is restricted with the structure parameter.
通过对控制器参数的研究，表明磁轴承最终的控制刚度不仅与控制器有关，而且受结构参数的制约。
The working principle and the digital controller of an active magnetic bearing(AMB)are investigated, digital control system based on digital signal processor TMS320F240 is discussed.
研究了有源磁悬浮轴承（AMB）的工作原理及其数字控制器，讨论了以定点数字信号处理器TMS32 0F2 4 0为核心的数字控制系统。
Aimed at the nonlinearity and uncertainty of magnetic suspension system, a slide mode variable structure controller is designed based on feedback linearization.
针对磁悬浮系统的非线性和不确定性，设计了基于反馈线性化的滑模变结构悬浮控制器。
The hybrid magnetic levitation ball is one of typical mechatronics systems, among which the performance of the controller is very important.
混合磁悬浮球是一种典型的机电一体化系统，其中的控制器是磁悬浮控制系统至关重要的一环。
To solve the chattering problem caused by general Sliding Mode control in active magnetic bearings control, a Boundary Layer Approach was used in the controller design.
针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题，将边界层法用于滑模变结构控制器的设计。
From a modeling of an active magnetic bearing (amb), a numeric controller was designed with degrade observer and optimized feedback control. it was proved out with simulink in matlab.
本文通过对主动磁悬浮轴承系统的建模，设计了带降维观测器的最优反馈数字控制器，并在模拟中验证了控制器的正确性。
The controller is one of key parts in the magnetic suspension system. And its performance has close relations with the system stability and other various technical indicators.
控制器是磁悬浮系统中的重要环节，其性能与系统的稳定性及各项技术指标有着密切关系。
The control mechanism based on ventricular work is proposed to design for the controller adaptable to axial-flow blood pump driven by extracorporeal magnetic field.
文章提出了基于心室功的控制机制，设计了适合外磁驱动轴流式血泵结构特点的控制器。
The torque controller system feeds back an assumed motor torque calculated by using the secondary magnetic flux and the torque current detected from current sensors of the primary currents.
该控制器通过检测定子电流，由转矩磁通和转矩电流动态推算电动机转矩，并以此作为反馈量。
The mechanical structure of the permanent magnetic linear actuator as well as the control principle of the repetitive controller is introduced.
文章介绍了永磁直线伺服单元的机械结构及重复控制的基本原理；
How to design the controller to enable the system to work stably with good anticipated performance indicators is a kind of vital problems on studying magnetic suspension system.
控制器应如何设计才能使系统稳定地工作并达到预期的性能指标是研究磁悬浮系统必须解决的问题。
Both design and realization of the magnetic system's controller are studied in this paper based on MSBS.
本文以磁悬挂天平为对象，重点研究磁悬挂天平悬浮控制器的设计与实现问题。
The PD controller of suspension gap and flux feedback is designed. The magnetic field measurement method is given based on the characteristics of the maglev train.
设计磁通反馈与悬浮间隙的PD控制器，并根据磁悬浮列车特点，给出磁场测量方法。
The mathematic model of the top magnetic shaker controller was studied from the electro-magnetic theory and mechanics theory.
从电磁学理论和力学理论首次研究了顶部振打器的数学模型，分析了振打锤运动的三个阶段。
An approximate non-minimum phase transfer function of magnetic suspension bearing is established, on the basis of that, a closed-loop controller is designed and makes the whole system stable.
建立了磁浮轴承的近似非最小相位传递函数模型，并基于此模型设计了保证系统稳定的闭环控制器。
Magnetic Compensated Hall Sensors' theory and merits are introduced in this paper. The application in variable frequency machines, UPS and direct-current drive controller is also given.
介绍磁补偿霍尔传感器的工作原理及其优点，讨论了它在变频调速电机、不间断电源(ups)及直流驱动控制方面的应用。
Aiming at the nonlinearity of the magnetic suspension system, a nonlinear controller was designed.
针对悬浮系统的非线性特征，设计了一种非线性悬浮控制器。
应用推荐